PCIe Carrier Boards

• One XMC mezzanine module slot
• 3/4-length
• Non-Intelligent carrier card
• PCIe x8 interface

Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.

• Two AcroPack or mPCIe mezzanine module slots
• Non-Intelligent carrier card
• PCI/104-Express / PCIe/104 interface

APX4020 carrier cards interface two AcroPack mezzanine modules to a PCI Express bus on a PC-based computer system.

• AMD Zynq UltraScale+ MPSoC
• ARM Cortex™ A53 & R5 CPUs
• Programmable logic
• PCIe Bus Interface

APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.

• Up to 48 TTL or 24 differential RS485
• Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly

This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  

• 8 or 16 voltage output channels
• Independent D/A converter on each channel
• 11µS settling time
• ±10V output range

The IP220A outputs analog voltage signals to drive up to 16 devices.

• 4 or 8 voltage output channels
• Individual D/A converters on each channel
• 10µS settling time
• Selectable output range (±5V, ±10V, 0-10V)

IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.

• 8 or 16 voltage output channels
• Independent D/A converter on each channel
• 13µS settling time
• ±10V output range

The IP231 outputs analog voltage signals to drive up to 16 devices.

• 8 voltage output channels
• Individual D/A converters on each channel
• 10µS settling time
• Selectable output range (±5V, ±10V, 0-10V)

IP235A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.

• 20 differential or 40 single-ended input channels
• 200KHz throughput
• 4.5µS/conversion
• Selectable input range (±5V, ±10V, 0-10V)

The IP320A monitors 20 differential or 40 single-ended input channels.

• 16 differential or 32 single-ended input channels
• 200KHz throughput
• 5µS/conversion
• Selectable input range (±5V, ±10V, 0-5V, 0-10V)

IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.

• 16 differential inputs (two 8-channel groups)
• 12 or 14-bit A/D
• 125KHz throughput
• 8µS conversion time for 8-channel group
• 512 sample FIFO buffer, ±10V input range

IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.

• 40 input channels
• 0-60V DC input range
• Change-of-state/level interrupts (up to 12 channels)

The IP400 can monitor the on/off (high/low) status of up to 40 devices.

• 40 low-side switch output channels
• 0-60V DC output range
• High output current (up to 1A per channel)

The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    

• 32 bi-directional digital input and/or output channels
• 0-60V DC input and output range
• Low-side output switches
• Outputs sink up to 1A per channel
• Change-of-state and level interrupts (up to 8 channels)

The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.

• 24 differential digital input and/or output channels
• Ruggedized RS-422A/485 transceivers
• Interrupt support on all channels (change-of-state and high or low level transition)

The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.

• 32 port-isolated input channels
• ±60V AC/DC input (three ranges)
• Interrupt support for each channel

IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.