Home » Embedded I/O & Processing Solutions » PCIe Products » PCIe Carrier Boards
These non-intelligent carrier cards interface AcroPack®, XMC, PMC, and Industry Pack mezzanine modules to a PCI Express bus in a PC-based embedded computer.  
  • Compare
    Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP500: Quad Serial RS232 Communication Module

    • Four RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP512: Quad Isolated Serial RS422b/485 Communication Module

    • Four isolated full duplex RS422b serial ports (supports RS485)
    • Extended temperature
    • PCIe Bus interface
    AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP513: Quad Isolated Serial RS232 Communication Module

    • Four Isolated RS232 Serial Ports
    • Extended Temperature
    • PCIe Bus Interface
    These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP520: Octal Serial RS232 Communication Module

    • Eight RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP522: Octal Serial RS422/485 Communication Module

    • Eight RS422/485 serial ports
    • Extended temperature
    • PCIe Bus interface
    These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP560A: Isolated CAN Bus Interface Module

    • Four CAN bus channels with isolation
    • CAN 2.0A/B
    • ARINC 825
    • CANaerospace
    AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    AP570: MIL-STD-1553 Communication Module

    • One dual redundant MIL-STD-1553 channel
    • Extended temperature
    • PCIe bus interface
    AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Read more
  • Compare
    Compare

    AP580: 1Gb Ethernet with Optional Power over Ethernet Module

    • 1Gb Ethernet
    • Optional Power Over Ethernet
    • PCIe bus interface
    The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module

    End of Life. Consult factory for alternative solutions.
    • Four asynchronous EIA/TIA-422B (EIA-485) serial ports
    • FIFO buffers (16 or 64-byte)
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules

    • Four asynchronous EIA-485 serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP511: Serial Communication, 422 Isolated Industry Pack Module

    • Four asynchronous EIA/TIA-422B isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP512: Serial Communication, 485 Isolated Industry Pack Module

    • Four asynchronous EIA-485 isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    IP520: Serial Communication, 232 Octal Industry Pack Module

    • Eight asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 230Kbps)
    Consult factory for long-term availability.
    Select options This product has multiple variants. The options may be chosen on the product page