IP500A: Serial Communication, 232 Industry Pack Module

These modules provide asynchronous serial and parallel communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included.

The IP500A is a drop-in replacement for the IP500, please see the known differences document below for more information.
Known differences between the IP500 and the IP500A statement.

For more efficient data processing, each serial port is equipped with 16-character FIFO buffers on the transmit and receive lines.

The data ports generate individually controlled transmit, receive, line status, and data set interrupts. Since unique interrupt vectors may be assigned to each port, it is easy for you to identify and locate the interrupt source. Also, a priority shifting scheme prevents continuous interrupts from one port from blocking interrupts from another.

Specifications

RS232E Serial Ports

Configuration: Independent, non-isolated serial ports with a common single return connection and configured as a DTE device.
Data rate: Programmable up to 128K bits/second using internal baud rate generator. Consult factory for custom baud rates up to 512K baud.
Max. cable length: 15 meters (50 feet) typical, limited to a cable capacitive load of 2500pF.
Character size: 5 to 8 bits, software-programmable.
Parity: Odd, even, or no parity; software-programmable.
Stop bits: 1, 1-1/2, or 2 bits; software-programmable.
Data register buffers: 16-byte receive FIFO buffer and 16-byte transmit FIFO buffer.
Interrupts: Receiver line status (overrun, parity, framing error, or break interrupt); received data available (FIFO level reached) or character time-out; transmitter holding register empty; or modem status (CTS, DSR, RI, or DCD).

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock): ID PROM read: 0 wait states (255nS cycle). Channel register read/write: 1 wait state (375nS cycle). Interrupt select cycle: 2 wait states.

Environmental

Operating temperature: 0 to 70°C.
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power:
+5V (±5%): 300mA maximum.
±12V (±5%) from P1: 75mA maximum.
MTBF: 3,055,730 hrs at 25°C, MIL-HDBK-21F,Notice 2.

Additional information