IP520: Serial Communication, 232 Octal Industry Pack Module
Product short description:
- Eight asynchronous EIA/TIA-232E serial ports
- 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 230Kbps)
Not recommended for new designs. Limited availability - please contact sales department.
These modules provide eight asynchronous serial communication ports from a single IP carrier slot. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Signal support for RTS/CTS handshaking is also included.
For more efficient data processing, each serial port is equipped with 64-character FIFO buffers on the transmit and receive lines.
The data ports generate individually controlled transmit, receive, line status, and data set interrupts. Since unique interrupt vectors may be assigned to each port, it is easy for you to identify and locate the interrupt source. Also, a priority shifting scheme prevents continuous interrupts from one port from blocking interrupts from another.
Specifications
RS232E Serial Ports
Configuration: Independent, non-isolated serial ports with a common single return connection and configured as a DTE device.
Data rate: Programmable up to 230K bits/second using internal baud rate generator.
Max. cable length: 15 meters (50 feet) typical, limited to a cable capacitive load of 2500pF.
Character size: 5 to 8 bits, software-programmable.
Parity: Odd, even, or no parity; software-programmable.
Stop bits: 1, 1-1/2, or 2 bits; software-programmable.
Data register buffers: Double buffered or 64-byte FIFO buffered, mode selectable.
Interrupts: Receiver line status (overrun, parity, framing error, or break interrupt); received data available
(FIFO level reached) or character time-out; transmitter
(FIFO level reached); or modem status (CTS).
IP Compliance (ANSI/VITA-4)
Meets IP specifications per ANSI/VITA-4 1996.
IP data transfer cycle types supported:
Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 0 wait state (250nS cycle).
Channel register read/write: 1 wait state (375nS cycle).
Interrupt register read/write: 2 wait states (500nS cycle).
Environmental
Operating temperature: 0 to 70°C (IP520-64) or -40 to 85°C (IP520-64E/5018-xE).
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: +5V (±5%): 340mA maximum.
MTBF: 3,000,012 hrs at 25°C, MIL-HDBK-217F, Notice 2.
- Eight EIA/TIA-232E ports
- 64-byte transmit FIFO buffers, 64-byte receive FIFO buffers
- Interrupts with unique vectors for each port
- Programmable baud rate (up to 230Kbps)
- Individual handshake lines (RTS, CTS) on each channel
- Line-break and false start-bit detection
- Industry-standard 16C654 family UART includes software-compatible 16C450 mode
- 0 to 70°C (IP520-64) or -40 to 85°C (IP520-64E/5018-xE)
- High-density design lowers per-port costs and saves IP carrier card slots for other functions
- 64-byte FIFO buffers minimize CPU interaction for improved system performance
- Each serial channel provides handshake support to simplify interfacing with modems
Specs & Catalogs
Manuals
IP520 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).$55Select options -
CS-IP Conformal Coat
Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated$75Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
Additional information
Weight | 8 oz |
---|---|
Dimensions | 4 × 2 × 1 in |
Part Number | IP520-64: eight EIA/TIA-232E ports., IP520-64E: eight EIA/TIA-232E ports, extended temp. range. |
Product Series | Industry Pack |
-
Description
These modules provide eight asynchronous serial communication ports from a single IP carrier slot. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Signal support for RTS/CTS handshaking is also included.
For more efficient data processing, each serial port is equipped with 64-character FIFO buffers on the transmit and receive lines.
The data ports generate individually controlled transmit, receive, line status, and data set interrupts. Since unique interrupt vectors may be assigned to each port, it is easy for you to identify and locate the interrupt source. Also, a priority shifting scheme prevents continuous interrupts from one port from blocking interrupts from another.
Specifications
RS232E Serial Ports
Configuration: Independent, non-isolated serial ports with a common single return connection and configured as a DTE device.
Data rate: Programmable up to 230K bits/second using internal baud rate generator.
Max. cable length: 15 meters (50 feet) typical, limited to a cable capacitive load of 2500pF.
Character size: 5 to 8 bits, software-programmable.
Parity: Odd, even, or no parity; software-programmable.
Stop bits: 1, 1-1/2, or 2 bits; software-programmable.
Data register buffers: Double buffered or 64-byte FIFO buffered, mode selectable.
Interrupts: Receiver line status (overrun, parity, framing error, or break interrupt); received data available
(FIFO level reached) or character time-out; transmitter
(FIFO level reached); or modem status (CTS).IP Compliance (ANSI/VITA-4)
Meets IP specifications per ANSI/VITA-4 1996.
IP data transfer cycle types supported:
Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 0 wait state (250nS cycle).
Channel register read/write: 1 wait state (375nS cycle).
Interrupt register read/write: 2 wait states (500nS cycle).Environmental
Operating temperature: 0 to 70°C (IP520-64) or -40 to 85°C (IP520-64E/5018-xE).
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: +5V (±5%): 340mA maximum.
MTBF: 3,000,012 hrs at 25°C, MIL-HDBK-217F, Notice 2. -
Features & Benefits
- Eight EIA/TIA-232E ports
- 64-byte transmit FIFO buffers, 64-byte receive FIFO buffers
- Interrupts with unique vectors for each port
- Programmable baud rate (up to 230Kbps)
- Individual handshake lines (RTS, CTS) on each channel
- Line-break and false start-bit detection
- Industry-standard 16C654 family UART includes software-compatible 16C450 mode
- 0 to 70°C (IP520-64) or -40 to 85°C (IP520-64E/5018-xE)
- High-density design lowers per-port costs and saves IP carrier card slots for other functions
- 64-byte FIFO buffers minimize CPU interaction for improved system performance
- Each serial channel provides handshake support to simplify interfacing with modems
-
Specs & Data Sheets
Specs & Catalogs
Manuals
IP520 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
IPSW-API-LNX (Log in to download the file) -
Accessories
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).$55Select options -
CS-IP Conformal Coat
Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated$75Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
-
-
Additional information
Additional information
Weight 8 oz Dimensions 4 × 2 × 1 in Part Number IP520-64: eight EIA/TIA-232E ports., IP520-64E: eight EIA/TIA-232E ports, extended temp. range.
Product Series Industry Pack
Please login to submit this form.