Click to zoom
$580$720

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • 32 bi-directional digital input and/or output channels
  • 0-60V DC input and output range
  • Low-side output switches
  • Outputs sink up to 1A per channel
  • Change-of-state and level interrupts (up to 8 channels)

The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.

Input channels can be configured with interrupts for a change of state or level detection of any bit on up to 8 channels. The TTL input threshold includes hysteresis for increasing noise immunity.

In order to ensure safe, reliable control under all conditions, output operation is “fail-safe.” That is, the outputs are always off upon power-up and are automatically cleared following a software reset.

Loopback monitoring of critical control signals is easy since the input and output circuitry are connected in tandem to each channel.

Specifications

Digital Inputs

Input channel configuration: 32 noninverting buffered inputs with a common connection.
Input signal voltage range: 0 to 60V DC,maximum.
Input signal threshold: TTL compatible. 1.5V DC with 200mV of hysteresis, typ. Limited to TTL levels of 0.8V DC (max. low level) and 2.0V DC (minimum high level).
Input response time: 250nS minimum to 375nS max.
Interrupts: Change-of-state and level on channels 0-7.

Digital Outputs

Channel configuration: 32 open-drain DMOS MOSFETs with common source connection.
Output ON current range: 0 to 1A DC, continuous per channel (10A total for all channels combined). No deration required at elevated ambients.
Turn on time: 320nS typical (varies with load).
Turn off time: 500nS typical (varies with load).

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*).
Access Times (8MHz clock): 1 wait state (375nS cycle).
Interrupt handling format: An 8-bit vector is provided during interrupt acknowledge cycles on D0 – D7.
Updates: Two 16-bit read/writes to update all channels.

Environmental

Operating temperature: 0 to 70°C (IP408) or -40 to 85°C (IP408E).
Storage: -55 to 125°C (all models).
Relative Humidity: 5 to 95% non-condensing
MTBF: 1,317,013 hrs at 25°C, MIL-HDBK-217F, Notice 2.
Power: +5V (±5%): 50mA max. +12V (±5%) from P1: 8.5mA max. -12V (±5%) from P1: 0mA (not used).

  • 32 digital input and/or output channels
  • 0 to 60V DC input range, 60V DC low-side switch outputs
  • Outputs sink up to 1A per channel
  • TTL-compatible input threshold with hysteresis
  • Change-of-state/level interrupts (up to 8)
  • 0 to 70°C (IP408) or -40 to 85°C (IP408E)
  • Buffered inputs include hysteresis to increase noise immunity.
  • Interrupts are software-programmable for a change of state or level detection.
  • Loopback monitoring enables self-test and fault diagnostics to detect open output switches or shorts.
  • High impedance inputs prevent loading of the input source and minimize current.
  • Individual outputs sink up to 1A DC continuous. No deration of output current required at elevated temperatures.
IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $45$705
    Select options
  • Compare

    Conformal Coating

    Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).  
    $60
    Select options
  • Compare

    CS-IP Conformal Coat

    Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated
    $80
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $385$1,035
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $170$245
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $250$1,085
    Select options

Additional information

Weight 8 oz
Dimensions 4 × 2 × 1 in
Part Number

IP408: 0-60V DC input and output range., IP408E: 0-60V DC input and output range, extended temp. range.

Product Series

Industry Pack

  • Description

    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.

    Input channels can be configured with interrupts for a change of state or level detection of any bit on up to 8 channels. The TTL input threshold includes hysteresis for increasing noise immunity.

    In order to ensure safe, reliable control under all conditions, output operation is “fail-safe.” That is, the outputs are always off upon power-up and are automatically cleared following a software reset.

    Loopback monitoring of critical control signals is easy since the input and output circuitry are connected in tandem to each channel.

    Specifications

    Digital Inputs

    Input channel configuration: 32 noninverting buffered inputs with a common connection.
    Input signal voltage range: 0 to 60V DC,maximum.
    Input signal threshold: TTL compatible. 1.5V DC with 200mV of hysteresis, typ. Limited to TTL levels of 0.8V DC (max. low level) and 2.0V DC (minimum high level).
    Input response time: 250nS minimum to 375nS max.
    Interrupts: Change-of-state and level on channels 0-7.

    Digital Outputs

    Channel configuration: 32 open-drain DMOS MOSFETs with common source connection.
    Output ON current range: 0 to 1A DC, continuous per channel (10A total for all channels combined). No deration required at elevated ambients.
    Turn on time: 320nS typical (varies with load).
    Turn off time: 500nS typical (varies with load).

    IP Compliance (ANSI/VITA 4)

    Meets IP specifications per ANSI/VITA 4-1995.
    IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*).
    Access Times (8MHz clock): 1 wait state (375nS cycle).
    Interrupt handling format: An 8-bit vector is provided during interrupt acknowledge cycles on D0 – D7.
    Updates: Two 16-bit read/writes to update all channels.

    Environmental

    Operating temperature: 0 to 70°C (IP408) or -40 to 85°C (IP408E).
    Storage: -55 to 125°C (all models).
    Relative Humidity: 5 to 95% non-condensing
    MTBF: 1,317,013 hrs at 25°C, MIL-HDBK-217F, Notice 2.
    Power: +5V (±5%): 50mA max. +12V (±5%) from P1: 8.5mA max. -12V (±5%) from P1: 0mA (not used).

  • Features & Benefits

    • 32 digital input and/or output channels
    • 0 to 60V DC input range, 60V DC low-side switch outputs
    • Outputs sink up to 1A per channel
    • TTL-compatible input threshold with hysteresis
    • Change-of-state/level interrupts (up to 8)
    • 0 to 70°C (IP408) or -40 to 85°C (IP408E)
    • Buffered inputs include hysteresis to increase noise immunity.
    • Interrupts are software-programmable for a change of state or level detection.
    • Loopback monitoring enables self-test and fault diagnostics to detect open output switches or shorts.
    • High impedance inputs prevent loading of the input source and minimize current.
    • Individual outputs sink up to 1A DC continuous. No deration of output current required at elevated temperatures.
  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $45$705
      Select options
    • Compare

      Conformal Coating

      Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).  
      $60
      Select options
    • Compare

      CS-IP Conformal Coat

      Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated
      $80
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $385$1,035
      Select options
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $170$245
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $250$1,085
      Select options
  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 4 × 2 × 1 in
    Part Number

    IP408: 0-60V DC input and output range., IP408E: 0-60V DC input and output range, extended temp. range.

    Product Series

    Industry Pack