IP330A: Analog Input Module, 16-bit A/D
Product short description:
- 16 differential or 32 single-ended input channels
- 200KHz throughput
- 5µS/conversion
- Selectable input range (±5V, ±10V, 0-5V, 0-10V)
IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.
The IP330A has many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.
“Mailbox” memory allows the CPU to read the latest data in 32 storage buffer registers without interrupting the A/D converter.
The IP330A is a drop-in replacement for the IP330, please see the known differences document below for more information.
Known differences between the IP330 and the IP330A statement
Analog Inputs
Input configuration: 16 differential or 32 single-ended.
A/D resolution: 16 bits.
Input ranges: ±5V, ±10V*, 0-5V, and 0-10V*. * Requires ±15V external supplies.
Data sample memory: Individual channel mailbox with one or two storage buffer registers per channel.
Maximum throughput rate:
Only one channel can be updated at a time.
One channel: 200KHz maximum (5μS/conversion) [66KHz (15μS/conversion) recommended] 16 channels (differential): 4.2KHz (240μS/16 ch) 32 channels (single-ended): 2.1KHz (480μS/32 ch).
Programmable gains: 1x, 2x, 4x, 8x.
A/D triggers: External and software.
System accuracy: 2 LSB (0.0030%) typical (SW calib., gain=1, 25°C).
Data format: Straight binary or two’s compliment.
Input overvoltage protection: Vss -20V to Vdd 40V with power on, -35V to 55V power off.
Common mode rejection ratio (60Hz): 96dB typical.
Channel-to-channel rejection ratio (60Hz): 96dB typical.
IP Compliance (ANSI/VITA 4)
Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 1 wait state (375ns cycle).
I/O space read/write: 1 wait states.
Interrupt select cycle read: 1 wait state.
Mailbox I/O read: 1 wait state. 3 wait states if ongoing internal mail box write.
Environmental
Operating temperature: 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model).
Storage temperature: -55 to 100°C.
Relative humidity: 5 to 95% non-condensing.
MTBF: Consult factory.
Power:
+5V: 65mA typical, 200mA maximum.
+12V: 14mA typical, 20mA maximum.
-12V/-15V: 11mA typical,15mA maximum.
- “Mailbox” memory eliminates scanning interruptions for optimum throughput.
- Data register indicates new and missed (overwritten) data values in the mailbox.
- Programmable interrupts simplify data acquisition by providing greater control.
- 16-bit A/D converter (ADC)
- 5µS conversion time (200KHz)
- 16 differential or 32 single-ended inputs (±5V, ±10V, 0-5V, and 0-10V input ranges)
- Individual channel mailbox with one or two storage buffer registers per channel
- Programmable scan control
- Four scanning modes
- User-programmable interval timer
- External trigger input and output
- Programmable gain for individual channels
- Post-conversion interrupts
- 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model)
Specs & Catalogs
Manuals
Catalogs
Drawings & Diagrams
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Part Number | TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812A / VPX4814A |
-
Description
These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.
Transition modules provide a solution for controlling the location of your cabling within the card cage.
TRANS-200: Transition module for AVME9670 board. See AVME9670 manual for more information.
VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information
-
Features & Benefits
- “Mailbox” memory eliminates scanning interruptions for optimum throughput.
- Data register indicates new and missed (overwritten) data values in the mailbox.
- Programmable interrupts simplify data acquisition by providing greater control.
- 16-bit A/D converter (ADC)
- 5µS conversion time (200KHz)
- 16 differential or 32 single-ended inputs (±5V, ±10V, 0-5V, and 0-10V input ranges)
- Individual channel mailbox with one or two storage buffer registers per channel
- Programmable scan control
- Four scanning modes
- User-programmable interval timer
- External trigger input and output
- Programmable gain for individual channels
- Post-conversion interrupts
- 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model)
-
Specs & Data Sheets
Specs & Catalogs
Manuals
Catalogs
Drawings & Diagrams
-
Software
IPSW-API-LNX (Log in to download the file) -
Accessories
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
-
-
Additional information
Additional information
Weight N/A Dimensions N/A Part Number TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812A / VPX4814A
Please login to submit this form.