IP230A: Analog Output Module, 16-bit D/A

IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.

Jumper-selectable output ranges give you the choice of unipolar or bipolar voltage output. And for greater flexibility, the IP230A module accepts conversion start triggers from software commands, or from external sources for synchronization to specific events.

The IP230A is a drop-in replacement for the IP230, please see the known differences document below for more information.
Known differences between the IP230 and the IP230A.

Specifications

Analog Outputs

Output configuration: 4 (IP230A-4/4E) or 8 (-8/8E).
D/A Resolution: 16 bits.
Output ranges: ±5V, ±10V, 0 to 10V (jumper-selectable).
Maximum throughput rate: Outputs can be updated simultaneously or individually. One channel: 100KHz (10µS/conversion). Four channels (IP235A-4): 100KHz (10µS/4 ch). Eight channels (IP235A-8): 100KHz (10µS/8 ch).
DAC programming: Immediate (transparently programmed to DAC output); simultaneous (input latches of multiple DACs are loaded with new data before simultaneously updating outputs).
System accuracy: 0.0061% of 20V span maximum corrected error (i.e. calibrated) at 25°C with the output unloaded.
Output at reset: 0V for bipolar output, 5V for unipolar.
Output current: -5 to +5mA (maximum).
Short circuit protection: Indefinite at 25°C.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*).
Access Times (8MHz clock): All functions: 1 wait state (375nS cycle).

Environmental

Operating temperature: 0 to 70°C (IP230A-4/8) or -40 to 85°C (IP230A-4E/8E models).
Storage temperature: -55 to 125°C (all models).
Relative humidity: 5 to 95% non-condensing
Power: +5V (±5%): 200mA maximum. ±12V (±5%) from P1: 150mA maximum.
MTBF: 815,720 hrs. at 25°C, MIL-HDBK-217F, notice 2