IP340: Analog Input Module, Simultaneous Sample & Hold
Product short description:
- 16 differential inputs (two 8-channel groups)
- 12 or 14-bit A/D
- 125KHz throughput
- 8µS conversion time for 8-channel group
- 512 sample FIFO buffer, ±10V input range
IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.
These modules have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. A FIFO buffer holds the first bank’s data while the second bank is converted. Conversion of each bank requires only 8µS, and all 16 channels can be sampled in just 16µs.
Flexible configuration options give you extensive control over the conversion process. The channels or bank to be converted, timing, scan mode, and other parameters are user-programmable. Interrupt support adds further control to flag a FIFO that is full or filled to a user-defined threshold level.
Specifications
Analog Inputs
Input configuration: 16 differential.
A/D resolution: 12 bits (IP340), 14 bits (IP341).
Input range: ±10V.
Data sample memory: 512 sample FIFO buffer.
Max. throughput rate: Eight channels can be simultaneously acquired.
One channel: 125KHz (8µS/conversion)
8 channels (same bank): 1MHz (8µS/8 channels)
16 channels (high & low banks): 1MHz (16µS/16 ch.at minimum 2.2K ohm source resistance).
Data sample memory: 512-sample FIFO memory buffer.
A/D triggers: Internal timer, external, and software.
System accuracy:
IP340: 1.6 LSB (0.039%),
IP341: 2.4 LSB (0.014%).
Data format: Binary two’s compliment.
Input overvoltage protection: ±25V with power on, ±40V with power off.
Common mode rejection ratio (60Hz): 96dB typical.
Channel-to-channel rejection ratio (60Hz): 96dB typical.
IP Compliance (ANSI/VITA 4)
Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock): ID space read: 0 wait states (250ns cycle). FIFO buffer read: 2 wait states maximum (500nS), 1 wait state typical (375nS).
Registers read/write: 0 wait states (250ns cycle).
Interrupt read/write: 0 wait states (250ns cycle).
Environmental
Operating temperature: 0 to 70°C (IP340/341) or -40 to 85°C (IP340E/341E models).
Storage temperature: -40 to 125°C (all models).
Relative humidity: 5 to 95% non-condensing.
MTBF: 594,898 hrs at 25°C, MIL-HDBK-217F, Notice 2.
Power:
+5V: 65mA (IP340/341), 76mA ( IP340E/341E).
+12V from P1: 7mA.
-12V from P1: -6mA
- 16 differential inputs (±10V DC input range)
- Eight 12 or 14-bit A/D converters (IP340/341) with simultaneous sample and hold capability
- 8µS conversion time (125KHz) for 8-channel bank
- FIFO buffer with 512 sample memory
- Programmable conversion timer
- Programmable channel conversion control
- External trigger input and output
- Continuous and single-cycle conversion modes
- Interrupt generation for FIFO threshold conditions
- Precision calibration voltages stored on-board
- 0 to 70°C (IP340/341) or -40 to 85°C (IP340E/341E models)
Specs & Catalogs
Manuals
IP340 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).$55Select options -
CS-IP Conformal Coat
Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated$75Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
Additional information
Weight | 8 oz |
---|---|
Dimensions | 4 × 2 × 1 in |
Part Number | IP340: 16 differential inputs,12-bit A/D., IP340E: 16 differential inputs, 12-bit A/D, extended temp. range., IP341: 16 differential inputs, 14-bit A/D., IP341E: 16 differential inputs, 14-bit A/D, extended temp. range. |
Product Series | Industry Pack |
-
Description
IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.
These modules have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. A FIFO buffer holds the first bank’s data while the second bank is converted. Conversion of each bank requires only 8µS, and all 16 channels can be sampled in just 16µs.
Flexible configuration options give you extensive control over the conversion process. The channels or bank to be converted, timing, scan mode, and other parameters are user-programmable. Interrupt support adds further control to flag a FIFO that is full or filled to a user-defined threshold level.
Specifications
Analog Inputs
Input configuration: 16 differential.
A/D resolution: 12 bits (IP340), 14 bits (IP341).
Input range: ±10V.
Data sample memory: 512 sample FIFO buffer.
Max. throughput rate: Eight channels can be simultaneously acquired.
One channel: 125KHz (8µS/conversion)
8 channels (same bank): 1MHz (8µS/8 channels)
16 channels (high & low banks): 1MHz (16µS/16 ch.at minimum 2.2K ohm source resistance).
Data sample memory: 512-sample FIFO memory buffer.
A/D triggers: Internal timer, external, and software.
System accuracy:
IP340: 1.6 LSB (0.039%),
IP341: 2.4 LSB (0.014%).
Data format: Binary two’s compliment.
Input overvoltage protection: ±25V with power on, ±40V with power off.
Common mode rejection ratio (60Hz): 96dB typical.
Channel-to-channel rejection ratio (60Hz): 96dB typical.IP Compliance (ANSI/VITA 4)
Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock): ID space read: 0 wait states (250ns cycle). FIFO buffer read: 2 wait states maximum (500nS), 1 wait state typical (375nS).
Registers read/write: 0 wait states (250ns cycle).
Interrupt read/write: 0 wait states (250ns cycle).Environmental
Operating temperature: 0 to 70°C (IP340/341) or -40 to 85°C (IP340E/341E models).
Storage temperature: -40 to 125°C (all models).
Relative humidity: 5 to 95% non-condensing.
MTBF: 594,898 hrs at 25°C, MIL-HDBK-217F, Notice 2.
Power:
+5V: 65mA (IP340/341), 76mA ( IP340E/341E).
+12V from P1: 7mA.
-12V from P1: -6mA -
Features & Benefits
- 16 differential inputs (±10V DC input range)
- Eight 12 or 14-bit A/D converters (IP340/341) with simultaneous sample and hold capability
- 8µS conversion time (125KHz) for 8-channel bank
- FIFO buffer with 512 sample memory
- Programmable conversion timer
- Programmable channel conversion control
- External trigger input and output
- Continuous and single-cycle conversion modes
- Interrupt generation for FIFO threshold conditions
- Precision calibration voltages stored on-board
- 0 to 70°C (IP340/341) or -40 to 85°C (IP340E/341E models)
-
Specs & Data Sheets
Specs & Catalogs
Manuals
IP340 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
IPSW-API-LNX (Log in to download the file) -
Accessories
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31).$55Select options -
CS-IP Conformal Coat
Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated$75Select options -
IPSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Use with IndustryPack modules/carriers
- Easy installation procedure
- Help files with step-by-step instructions
- Demonstration Program
- Driver level support for desktop and embedded Windows level programming environments
$375 – $1,005Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
-
-
Additional information
Additional information
Weight 8 oz Dimensions 4 × 2 × 1 in Part Number IP340: 16 differential inputs,12-bit A/D., IP340E: 16 differential inputs, 12-bit A/D, extended temp. range., IP341: 16 differential inputs, 14-bit A/D., IP341E: 16 differential inputs, 14-bit A/D, extended temp. range.
Product Series Industry Pack
Please login to submit this form.