XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs

Click to zoom

Please sign in or register to see model options and to add products to your cart.

Compare
Compare
| Have a Question?
Product short description:
  • 16 discrete tandem input/output channels
  • Modbus TCP/IP,  Ethernet/IP, Profinet, or i2o® communication

The XT1110 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or low-side switched output operation.

XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs Description

The XT1110 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or low-side switched output operation.

Rugged construction, high density design, and easy USB-to-PC/Windows setup combine for a very effective I/O solution.

These units are ideal for remote monitoring, distributed control, or SCADA applications.

Input/Output Ranges
Input: 0-32V DC, TTL thresholds
Output: 0-32V DC, open-drain, up to 250mA

Ethernet Communication
Modbus TCP/IP, i2o® peer-to-peer available for Modbus TCP/IP only
Ethernet/IP
Profinet
10/100Base-T(X)
PriorityChannel™ device determinism

Power Requirement: 12 to 32V DC (2.5W)

IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of the USB-ISOLATOR when configuring an XT1000 I/O module.

Learn more about the Ethernet XT Series and view all models >

XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs Features & Benefits

  • 16 solid-state discrete I/O channels (any mix of inputs or outputs)
  • Built-in 10K ohm pull-up resistors for 2/3-wire sensors (contacts, proximity, TTL)
  • Configurable normal/reverse input logic
  • Outputs include built-in read-back capability
  • Easy setup with Windows software via USB
  • Watchdog timer control of failsafe outputs
  • Continuously changing “heart-beat” register validates module operation
  • High-Density 22.5mm wide package with pluggable, front-facing terminals
  • Dual Ethernet 10/100 ports (auto-negotiation) reduce switch port requirements
  • 1500V AC isolation (between I/O, power, and network ports) and surge/transient protection
  • Supports bussed/rail and redundant power
  • -40°C to +70°C wide temperature operation
  • Withstands 25g shock and 4g vibration
  • CE and UL/cUL Class 1 Div 2 Zone 2 approvals. ATEX Certified.

Learn more about the Ethernet XT Series and view all models >

How to Communicate with Acromag Ethernet/IP Modules from CompactLogix Controllers - 8500762
Communicating with Acromag Series 9xxEN-60xx,  XTxxx2-xxx, and NTE2xxx-xxxx Ethernet/IP™ Modules from CompactLogix™ PLC Device This document illustrates a procedure for configuring message commands intended for Acromag Busworks® Series Ethernet/IP modules using Ladder Logic programming software in addition to a CompactLogix Programmable Controller. It is assumed that the user has a working knowledge of; Ladder Logic...
How to Communicate with Modbus/TCP Modules from Ignition Software - 8501121
Setting Up and Communicating with Acromag Series 9xxEN-40xx and XTxxx1-xxx Modbus/TCP Modules and EtherStax™ Modbus/TCP from Ignition Software This document illustrates a procedure for configuring OPC tags intended for Acromag BusWorks® Series Modbus/TCP modules using Windows software from Inductive Automation. It is assumed that the user has a working knowledge of OPC, Modbus TCP, and...
How Does Ethernet I/O Simplify Communication Between One PLC and Multiple Remote Locations? - 8400822
This document illustrates using Acromag’s BusWorks® XT Ethernet I/O modules to split one signal from a central control room PLC; and control multiple remote locations using Ethernet protocol. Defining the Problem: A customer has multiple remote locations linked over an Ethernet network, each requiring discrete outputs. They all need to be sent the same communication...
How to Connect to Acromag Ethernet I/O Devices - 8500815
Getting Connected to Acromag Ethernet I/O Devices These instructions summarize the basic steps you will have to take in order to initially connect an Acromag Ethernet I/O product to your Personal Computer (PC) or laptop. To connect an Ethernet device to your PC, consult with your network administrator. Either temporarily change the TCP/IP configuration of...

Specs & Catalogs

XT1110 Data Sheet

ActiveX NET Controls

ESW-MBLIB: Ethernet Modbus C Library Software Datasheet

Ethernet I/O i2o Technology

How to Communicate with Ethernet XT Profinet from Siemens S7-1200 PLC - 8501007

Manuals

XT1111 User Manual - Modbus TCP/IP and i2o Peer-to-Peer Communication (Log in to download the file)

XT1112 User Manual - Ethernet/IP Communication (Log in to download the file)

XT1113 User Manual - Profinet Communication (Log in to download the file)

Brochure

XT Series Brochure

Drawings & Diagrams

XT1110_wiring_dwg

XT-SIP: Software Interface Information Page (Log in to download the file)
Ethernet XT Series Configuration Software (Log in to download the file)
ESW-MBLIB: Ethernet Modbus C Library Software Information Page (Log in to download the file)
AMTx: Modbus TCP/IP Software Information Page (Log in to download the file)
Profinet GSDML Files for XTxxx3-000 Modules (Log in to download the file)
Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
  • Compare
    Compare

    XT-SIP: Software Interface Package

    • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
    • Easy setup and digital calibration via USB with Windows configuration software
    • Download software only from the Software Tab below
    Select options
  • Compare
    Compare

    XTA-120V-6: Solid-State Relay Input Modules

    • 6 optocoupler channels
    • 120V AC/DC input with optical isolation
    • Universal 5/12/24V logic output
    The XTA-120V-6 optocoupler module provides six individually isolated 120V AC/DC digital (discrete) inputs to sense on/off levels and drive open-drain outputs. It is intended for use with BusWorks XT Series discrete I/O and other digital input modules to monitor contact closures or mains power supply high/low voltage levels.
    Select options
  • Compare
    Compare

    XTA-MRNO-6: Mechanical Relay Output Modules

    • 6 digital I/O channels
    •  Universal 5/12/24V logic inputs
    •  Form A, 250V AC / 30V DC @ 5A relay outputs
    The XTA-MRNO-6 is an interposing relay module with six digital inputs and six mechanical relay outputs. It is intended for use with BusWorks XT Series discrete I/O or other digital output modules for the purpose of driving high energy loads.
    Select options

Additional information

Weight 8 oz
Dimensions 4.5 × 1.5 × 5 in
Part Number

XT1111-000: Modbus/TCP and i2o protocol, XT1112-000: Ethernet/IP protocol, XT1113-000: Profinet protocol
Product Series

BusWorks XT Series
Communication

Ethernet/IP, i2o Peer-to-Peer, Modbus TCP/IP, Profinet
Configuration

USB Configuration, Windows Software Configuration

  • Description

    XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs Description

    The XT1110 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or low-side switched output operation.

    Rugged construction, high density design, and easy USB-to-PC/Windows setup combine for a very effective I/O solution.

    These units are ideal for remote monitoring, distributed control, or SCADA applications.

    Input/Output Ranges
    Input: 0-32V DC, TTL thresholds
    Output: 0-32V DC, open-drain, up to 250mA

    Ethernet Communication
    Modbus TCP/IP, i2o® peer-to-peer available for Modbus TCP/IP only
    Ethernet/IP
    Profinet
    10/100Base-T(X)
    PriorityChannel™ device determinism

    Power Requirement: 12 to 32V DC (2.5W)

    IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of the USB-ISOLATOR when configuring an XT1000 I/O module.

    Learn more about the Ethernet XT Series and view all models >

    XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs Features & Benefits

    • 16 solid-state discrete I/O channels (any mix of inputs or outputs)
    • Built-in 10K ohm pull-up resistors for 2/3-wire sensors (contacts, proximity, TTL)
    • Configurable normal/reverse input logic
    • Outputs include built-in read-back capability
    • Easy setup with Windows software via USB
    • Watchdog timer control of failsafe outputs
    • Continuously changing “heart-beat” register validates module operation
    • High-Density 22.5mm wide package with pluggable, front-facing terminals
    • Dual Ethernet 10/100 ports (auto-negotiation) reduce switch port requirements
    • 1500V AC isolation (between I/O, power, and network ports) and surge/transient protection
    • Supports bussed/rail and redundant power
    • -40°C to +70°C wide temperature operation
    • Withstands 25g shock and 4g vibration
    • CE and UL/cUL Class 1 Div 2 Zone 2 approvals. ATEX Certified.

    Learn more about the Ethernet XT Series and view all models >

  • Tech Papers

    How to Communicate with Acromag Ethernet/IP Modules from CompactLogix Controllers - 8500762
    Communicating with Acromag Series 9xxEN-60xx,  XTxxx2-xxx, and NTE2xxx-xxxx Ethernet/IP™ Modules from CompactLogix™ PLC Device This document illustrates a procedure for configuring message commands intended for Acromag Busworks® Series Ethernet/IP modules using Ladder Logic programming software in addition to a CompactLogix Programmable Controller. It is assumed that the user has a working knowledge of; Ladder Logic...
    How to Communicate with Modbus/TCP Modules from Ignition Software - 8501121
    Setting Up and Communicating with Acromag Series 9xxEN-40xx and XTxxx1-xxx Modbus/TCP Modules and EtherStax™ Modbus/TCP from Ignition Software This document illustrates a procedure for configuring OPC tags intended for Acromag BusWorks® Series Modbus/TCP modules using Windows software from Inductive Automation. It is assumed that the user has a working knowledge of OPC, Modbus TCP, and...
    How Does Ethernet I/O Simplify Communication Between One PLC and Multiple Remote Locations? - 8400822
    This document illustrates using Acromag’s BusWorks® XT Ethernet I/O modules to split one signal from a central control room PLC; and control multiple remote locations using Ethernet protocol. Defining the Problem: A customer has multiple remote locations linked over an Ethernet network, each requiring discrete outputs. They all need to be sent the same communication...
    How to Connect to Acromag Ethernet I/O Devices - 8500815
    Getting Connected to Acromag Ethernet I/O Devices These instructions summarize the basic steps you will have to take in order to initially connect an Acromag Ethernet I/O product to your Personal Computer (PC) or laptop. To connect an Ethernet device to your PC, consult with your network administrator. Either temporarily change the TCP/IP configuration of...

  • Specs & Data Sheets

    Specs & Catalogs

    XT1110 Data Sheet

    ActiveX NET Controls

    ESW-MBLIB: Ethernet Modbus C Library Software Datasheet

    Ethernet I/O i2o Technology

    How to Communicate with Ethernet XT Profinet from Siemens S7-1200 PLC - 8501007

    Manuals

    XT1111 User Manual - Modbus TCP/IP and i2o Peer-to-Peer Communication (Log in to download the file)

    XT1112 User Manual - Ethernet/IP Communication (Log in to download the file)

    XT1113 User Manual - Profinet Communication (Log in to download the file)

    Brochure

    XT Series Brochure

    Drawings & Diagrams

    XT1110_wiring_dwg

  • Software

    XT-SIP: Software Interface Information Page (Log in to download the file)
    Ethernet XT Series Configuration Software (Log in to download the file)
    ESW-MBLIB: Ethernet Modbus C Library Software Information Page (Log in to download the file)
    AMTx: Modbus TCP/IP Software Information Page (Log in to download the file)
    Profinet GSDML Files for XTxxx3-000 Modules (Log in to download the file)
    Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)

  • Accessories

    • Compare
      Compare

      XT-SIP: Software Interface Package

      • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
      • Easy setup and digital calibration via USB with Windows configuration software
      • Download software only from the Software Tab below
      Select options
    • Compare
      Compare

      XTA-120V-6: Solid-State Relay Input Modules

      • 6 optocoupler channels
      • 120V AC/DC input with optical isolation
      • Universal 5/12/24V logic output
      The XTA-120V-6 optocoupler module provides six individually isolated 120V AC/DC digital (discrete) inputs to sense on/off levels and drive open-drain outputs. It is intended for use with BusWorks XT Series discrete I/O and other digital input modules to monitor contact closures or mains power supply high/low voltage levels.
      Select options
    • Compare
      Compare

      XTA-MRNO-6: Mechanical Relay Output Modules

      • 6 digital I/O channels
      •  Universal 5/12/24V logic inputs
      •  Form A, 250V AC / 30V DC @ 5A relay outputs
      The XTA-MRNO-6 is an interposing relay module with six digital inputs and six mechanical relay outputs. It is intended for use with BusWorks XT Series discrete I/O or other digital output modules for the purpose of driving high energy loads.
      Select options

  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 4.5 × 1.5 × 5 in
    Part Number

    XT1111-000: Modbus/TCP and i2o protocol, XT1112-000: Ethernet/IP protocol, XT1113-000: Profinet protocol
    Product Series

    BusWorks XT Series
    Communication

    Ethernet/IP, i2o Peer-to-Peer, Modbus TCP/IP, Profinet
    Configuration

    USB Configuration, Windows Software Configuration

Related Items

  • Compare
    Compare

    900EN: 5-Port Ethernet Switch

    • 10/100Mbps
    • 15 to 36V DC power supply required
    • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
    Acromag’s five-port Ethernet switch is specially designed for use in industrial applications. Rugged construction and a variety of security features ensure reliable operation under demanding conditions.
    Select options
  • Compare
    Compare

    989EN: Ethernet Discrete I/O Modules with Counter / Timers

    • 16-channel discrete I/O
    • 8 counter/timers
    • Modbus TCP/IP communication
    These modules provide an isolated Ethernet interface for any input/output mix of up to 16 discrete signals. Inputs sense the status of dry contacts, switches, power supplies, and DC logic. Industrial-grade units have eight 32-bit counters with timers, alarms, and non-volatile memory for metering, totalizing, and low-frequency periodic measurement. The outputs control solid-state switching of lamps, horns, and other devices.
    Select options
  • Compare
    Compare

    PS5R: Slim Line Power Supplies

    • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
    • Universal Input (85-264V AC / 100-370V DC)
    • Lightweight and compact size
     
    Select options