Ethernet Digital I/O

• 4 analog inputs
• 2 analog output
• 6 discrete I/O channels
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP only

These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability.

• 12-channel discrete input and/or output
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP

These modules provide an isolated Ethernet network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983EN model with tandem I/O provides output level control and status verification in one unit.

• 16-channel discrete I/O
• 8 counter/timers
• Modbus TCP/IP communication

These modules provide an isolated Ethernet interface for any input/output mix of up to 16 discrete signals. Inputs sense the status of dry contacts, switches, power supplies, and DC logic. Industrial-grade units have eight 32-bit counters with timers, alarms, and non-volatile memory for metering, totalizing, and low-frequency periodic measurement. The outputs control solid-state switching of lamps, horns, and other devices.

• 96 bi-directional discrete I/O channels
• Modbus TCP/IP, i20 peer-to-peer communication

EtherStax I/O blocks provide a ruggedized, high-density solution to interface a very large quantity of discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser.

• 48 Channel-Isolated Discrete I/O (32 DC inputs, 16 AC/DC outputs)
• Modbus TCP/IP, i20 peer-to-peer

EtherStax I/O blocks provide a ruggedized, high-density solution to interface a large quantity of isolated discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser.

• 16 discrete I/O
• Active low in / sinking out
• Ethernet I/O plus Expansion I/O
• Multi-protocol support

NT2110 modules offer 16 bidirectional discrete I/O channels for low-side (sinking switch) applications. NTE Ethernet models provide a compact network interface to monitor or control discrete device levels. Appending NTX expansion models can interface up to 64 discrete I/O channels on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.  

• 16 discrete I/O
• Active high in / sourcing out
• Ethernet I/O plus Expansion I/O
• Multi-protocol support

NT2120 modules offer 16 bidirectional discrete I/O channels for high-side (sourcing switch) applications. NTE Ethernet models provide a compact network interface to monitor or control discrete device levels. Appending NTX expansion models can interface up to 64 discrete I/O channels on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.    

• 6 mechanical relay outputs
• 6 discrete inputs
• Ethernet I/O plus Expansion I/O
• Multi-protocol support

NT2130 modules offer six 5A mechanical relays and six discrete inputs. The NTE Ethernet I/O models provide a compact network interface to monitor and control discrete device levels. Appending NTX expansion models can interface up to 24 relays and 24 level sensing inputs on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.  

• 16 discrete tandem input/output channels
• Input: 0-32V DC, TTL thresholds
• Output: 0-32V DC, open-drain, up to 250mA
• Ethernet Communication: Modbus TCP/IP,  Ethernet/IP, Profinet, 10/100Base-T(X) PriorityChannel™ device determinism
• i2o® peer-to-peer available for Modbus TCP/IP only
• Power Requirement: 12 to 32V DC (2.5W)

The XT1110 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or low-side switched output operation.    

• Input: 0-32V DC, TTL thresholds
• Output: 0-32V DC, open-drain, up to 300mA
• Power Requirement: 12 to 32V DC (2.5W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1120 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or high-side switched output operation.