• Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt (±100mV DC), resistance (0 to 500 ohms) input
• Single or dual mechanical relay alarm outputs
• 10-36V DC power
• Software configured
• Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection)
• On/off controller capability

         

• 0 to 20mA DC, 0 to 10V DC output
• Mechanical relay (25V @ 5A) alarm
• 10-36V DC power
• Software configured
• Performs linearization, square root extraction, and optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.  

• ±100V or 0 to 22mA DC input ranges or 2 input channels, ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
• Single or dual mechanical relays
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

   

• 2 input channels, thermocouple (types J, K, T, R, S, E, B, N), or millivolt (±100mV DC) input
• Dual mechanical relays output
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

   

• 2 input channels, RTD (Pt, Ni, Cu) input
• Dual mechanical relay outputs
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

     

• 0 to 50KHz, 0 to 65535 pulses input
• 0 to 20mA DC, 0 to 10V DC output
• Mechanical alarm relay (25V @ 5A)
• 10-36V DC power
• Software configured; pulse counter; signal averaging; optional limit alarm functions

 

• 2 or 4 input channels, 0 to 20mA DC, 0 to 10V DC (selectable ranges)
• 0 to 20mA DC, 0 to 10V DC (selectable ranges) output
• 10-36V DC power
• Software configured, computes arithmetic operations, evaluates conditional and Boolean arguments, executes track & hold functions

 

• 0 to 20mA DC, 0 to 10V DC (selectable ranges), 896M 2 channels input
• 0 to 10KHz, 0 to 36,000 counts/hr Frequency output, 896M 2 channels
• Solid-state relay (60V DC @ 500mA) control output
• 10-36V DC power
• Software configured, ideal for integrator/totalizer applications, computes arithmetic operations, conditional arguments, track & hold functions

 

• Universal thermocouple or ±100mV input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP333 is a high-performance signal splitter that converts one millivolt or thermocouple input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.

• DC current and low voltage input
• 0-20mA, ±10V outputs
• 6-32V DC external power

The SP336 is a high-performance signal splitter that converts one DC current or millivolt input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Power connects on a terminal block, a rail bus, or both for redundancy. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±1V, ±5V, or ±10V input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP337 is a high-performance signal splitter that converts one process-level DC voltage input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±15, ±75, or ±150V input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP338 is a high-performance signal splitter that converts one high-level DC voltage input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.