Home » Embedded I/O & Processing Solutions » VPX SBC & VPX Carriers » Page 3

OpenVPX Single Board Computers (SBCs) & Carrier Cards

Single board computers (SBCs) and carrier cards are two types of components that are commonly used in OpenVPX systems. SBCs are self-contained computer boards that can be used as the main processor in a computing system, while carrier cards are used to interface other types of I/O modules, such as AcroPack, PMC, or XMC modules, to a VPX computer system. These types of products are often used in applications where high-performance computing and high-speed I/O are required, such as in defense and aerospace systems, scientific research, and other demanding environments. They offer a flexible and scalable solution for building custom computing systems that can be tailored to meet the specific needs of the application.
  • Compare
    Compare

    PMC482: Counter/Timer Module

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    PMC483: Counter/Timer Module

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
     
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    PMC484: Counter/Timer Module

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
     
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    PMC520: Serial Communication, 232 Octal

    • 8 asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 120Kbps)
    These modules provide eight asynchronous serial communication ports from a single PMC Socket.  
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    PMC521: PMC Serial Communication, 422/485 Octal Module

    • 8 asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 1.8432Mbps)
    These modules provide eight asynchronous serial communication ports from a single PMC Socket.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    Transition Modules

    • Various transition modules
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4500: VPX Carrier Cards for AcroPack® Modules

    • Air-cooled and conduction-cooled options
    • 3U format
    • Three AcroPack slots
    • PCIe Gen 1 interface
    The VPX4500 is a 3U VPX carrier for Acromag AcroPack mezzanine board modules. The carrier board provides a modular approach to system assembly since each carrier can be populated with any combination of analog input/output, digital input/output, communication, AP modules. The modularity allows the user to create a board which is customized to the application.      
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4520: VPX Carrier Card for AcroPack® Modules

    • PCIe x16 Gen 3 interface via Expansion plane
    • One XMC and Four AcroPack slots
    • 6U form factor
    The VPX4520 carrier card provides a simple and cost-effective solution for interfacing one XMC and four AcroPack modules to a VPX computer system. Click here to watch a short AcroMaggie video highlighting the VPX4520 features.  
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4521: VPX Carrier Card for AcroPack® Modules

    • PCIe x16 Gen 3 interface via Data plane
    • One XMC and Four AcroPack slots
    • 6U form factor
    The VPX4521 is a member of a 6U OpenVPX mezzanine carrier card family that supports a simple and cost-effective solution for interfacing XMC or AcroPack modules to OpenVPX computer systems. Click here to watch a short AcroMaggie video highlighting the VPX4521 features.    
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX4850 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports full Jn6 rear I/O
    The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX6600-BSP-VXW: Board Support Package

    • VxWorks board support package
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX6600-RTM-LF: Rear Transition Module

    • Rear Transition module for VPX6600 models
    • I/O available on the front panel
    • I/O available via internal connectors
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare
    Compare

    VPX6600: 3U AcroExpress® VPX CPU Air or Conduction-Cooled

    • Intel® Xeon® CPU (E3-1505M)
    • Up to 32GB DDR4 ECC RAM
    • Conduction-Cooled Option
    The AcroExpress® VPX6600 is a high-performance 3U OpenVPX™ embedded single board computer based on the Intel® Xeon® processor (E3-1505M) and PCH. Designed for COTS applications this Intel SBC utilizes the Intel C230 series PCH chipset for extensive I/O support. Heat is managed with a fully integrated heatsink for advanced cooling management. The VPX6600 doesn’t consume I/O space and offers specialized I/O on P2.
    Select options This product has multiple variants. The options may be chosen on the product page

OpenVPX™ Boards are Rugged and Military Ready - Continued

Green Separator Line

Acromag VPX products are designed for COTS applications. High performance 3U or 6U single board computers feature air or conduction-cooled options.  VPX carrier cards provide a simple and cost-effective solution for interfacing mezzanine I/O modules to a VPX computer system.

The AcroExpress® 3U and 6U SBC modules can support either one or two DDR4 ECC SODIMMs, for a total of up to 32GB. The SODIMMs are firmly attached to the module with screws and surrounded by heat sink material to provide a mechanically and thermally robust mechanism. Extended temperature models are available for operating in a -40°C to +85°C range.

They contain two M.2 expansion card slots to provide on-board storage capabilities. The M.2 slots support the use of SATA III and PCIe Gen. 3 storage drives.

The VPX6860 6U SBC supports an XMC mezzanine module, with up to a x8 Gen3 PCIe interface. It also supports one AcroPack or mini-PCIe module.

Acromag’s 3U and 6U OpenVPX™ carrier cards for VPX, XMC or PMC mezzanine modules are also designed for COTS applications. These carrier cards feature a high-speed PCI Express interface making them ideal for high-performance aerospace, defense, and scientific research. Choose from air-cooled, conduction-cooled or Ruggedized Enhanced Design Implementation (REDI VITA 48).