Mezzanine I/O Modules for VPX Carriers

• Eight RS422/485 serial ports
• Extended temperature
• PCIe Bus interface

These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Four CAN bus channels with isolation
• CAN 2.0A/B
• ARINC 825
• CANaerospace

AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.

• One dual redundant MIL-STD-1553 channel
• Extended temperature
• PCIe bus interface

AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• 1Gb Ethernet
• Optional Power Over Ethernet
• PCIe bus interface

The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.

• Analog input
• Analog output
• Digital I/O
• Counter/timers
• PCIe Bus Interface

AP730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion. They also handle digital I/O and counter/timer functions. Click here to watch this short AcroMaggie video that highlights the AP730.

• 52,160 logic cells
• Reconfigurable Xilinx Artix-7 FPGA
• PCI Express bus interface
• Conduction or air cooled

The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

• AMD Zynq UltraScale+ MPSoC
• ARM Cortex™ A53 & R5 CPUs
• Programmable logic
• PCIe Bus Interface

APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.

• LVDS and Plug-In I/O Modules
• XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core

Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Click here to watch a video explaining more about FPGAs.

• 64 LVDS I/O and plug-In I/O modules
• XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices

Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.

• LVDS I/O and plug-In I/O modules
• XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices

Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.

• Independent D/A converters on each channel
• 10µS settling time
• Three output ranges

Consult factory for long-term availability. Eight 16-bit D/A converter (DACs) to provide highly-accurate analog voltage outputs. A unique two-piece board design brings the proven reliability of Acromag’s IndustryPack^® (IP) A/D modules to a PMC format. An IP230A module is embedded on a PMC interface card that maintains maximum performance and transparent communication to the host.

• 16 differential or 32 single-ended inputs
• 125KHz throughput
• 8µS/conversion
• Selectable input range (±5V, ±10V, 0-5V, 0-10V)

Many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.

• 16 differential inputs (two 8-channel groups)
• Eight 14-bit A/D
• 125KHz throughput
• 8µS conversion time for 8-channel group
• 512 sample FIFO buffer
• ±10V input range

Sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank.

Consult factory for long-term availability.

• 32 bi-directional digital inputs and/or outputs
• 0-60V DC input and output range
• Low-side output switches
• Outputs sink up to 1A per channel
• Change-of-state and level interrupts  (up to 8 channels)

• 24 differential I/O, 16 TTL I/O
• Four 16-bit counter/timer channels,  six operating modes
• Change of state and level interrupts

The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.

Consult factory for long-term availability.

• 64 TTL bi-directional I/O
• Four 16-bit counter/timer channels with six operating modes
• Change of state and level interrupts