Mezzanine Modules for CompactPCI Carriers

• 32 port-isolated output channels (bipolar solid state relays)
• ±60V AC/DC output
• High/low-side switch configuration

IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.

• 48 bi-directional input/output channels
• TTL-compatible inputs
• CMOS-compatible open-drain outputs
• Interrupt support for each channel

IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.

• Two or six 16-bit (one or three 32-bit) counter/timer channels
• Event counter
• Output waveform generator
• Pulse-width or periodic rate monitor
• Watchdog timer with isolated relay output
• Interrupt support

Consult factory for long-term availability.    

End of Life. Consult factory for alternative solutions.

• Four asynchronous EIA/TIA-422B (EIA-485) serial ports
• FIFO buffers (16 or 64-byte)
• Interrupt support
• Programmable baud rate (up to 512Kbps)

• Four asynchronous EIA-485 serial ports
• 16-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA/TIA-422B isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA-485 isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Eight asynchronous EIA/TIA-232E serial ports
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 230Kbps)

Consult factory for long-term availability.

• Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 921.6bps)

Consult factory for long-term availability.

• LVDS and Plug-In I/O Modules
• XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core

Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Click here to watch a video explaining more about FPGAs.

• 64 LVDS I/O and plug-In I/O modules
• XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices

Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.

• LVDS I/O and plug-In I/O modules
• XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices

Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.

• Independent D/A converters on each channel
• 10µS settling time
• Three output ranges

Consult factory for long-term availability. Eight 16-bit D/A converter (DACs) to provide highly-accurate analog voltage outputs. A unique two-piece board design brings the proven reliability of Acromag’s IndustryPack^® (IP) A/D modules to a PMC format. An IP230A module is embedded on a PMC interface card that maintains maximum performance and transparent communication to the host.

• 16 differential or 32 single-ended inputs
• 125KHz throughput
• 8µS/conversion
• Selectable input range (±5V, ±10V, 0-5V, 0-10V)

Many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.

• 16 differential inputs (two 8-channel groups)
• Eight 14-bit A/D
• 125KHz throughput
• 8µS conversion time for 8-channel group
• 512 sample FIFO buffer
• ±10V input range

Sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank.

Consult factory for long-term availability.

• 32 bi-directional digital inputs and/or outputs
• 0-60V DC input and output range
• Low-side output switches
• Outputs sink up to 1A per channel
• Change-of-state and level interrupts  (up to 8 channels)