Mezzanine I/O Modules for COM Express

• RS422/RS485 I/O
• Six 32-bit Counters
• PCIe bus interface

Support for internal or external triggering simplifies the synchronization of operations to specific events. Click here to watch a short video highlighting the features of the Acromag AP484.

• Four RS232 serial ports
• Extended temperature
• PCIe Bus interface

The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Four isolated full duplex RS422b serial ports (supports RS485)
• Extended temperature
• PCIe Bus interface

AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.

• Four Isolated RS232 Serial Ports
• Extended Temperature
• PCIe Bus Interface

These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Eight RS232 serial ports
• Extended temperature
• PCIe Bus interface

The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.

• Eight RS422/485 serial ports
• Extended temperature
• PCIe Bus interface

These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Four CAN bus channels with isolation
• CAN 2.0A/B
• ARINC 825
• CANaerospace

AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.

• One dual redundant MIL-STD-1553 channel
• Extended temperature
• PCIe bus interface

AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• 1Gb Ethernet
• Optional Power Over Ethernet
• PCIe bus interface

The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.

• Analog input
• Analog output
• Digital I/O
• Counter/timers
• PCIe Bus Interface

AP730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion. They also handle digital I/O and counter/timer functions. Click here to watch this short AcroMaggie video that highlights the AP730.

• 52,160 logic cells
• Reconfigurable Xilinx Artix-7 FPGA
• PCI Express bus interface
• Conduction or air cooled

The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

• High-Speed Analog Input
• Two Differential Channels
• Two 16-bit A/D Channels

These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.

• 16 analog inputs, simultaneous A/D
• 8 analog outputs, simultaneous D/A
• 16 digital I/O channels

The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.

• Plug-In I/O Modules
• Choose from four I/O Options
• JTAG Support Option

These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.

• LVDS and Plug-In I/O Modules
• XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core

Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Click here to watch a video explaining more about FPGAs.

• 64 LVDS I/O and plug-In I/O modules
• XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices

Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.