AP484: Six 32-Bit Counter / Timer Module
Product short description:
- RS422/RS485 I/O
- Six 32-bit Counters
- PCIe bus interface
Support for internal or external triggering simplifies the synchronization of operations to specific events.
Click here to watch a short video highlighting the features of the Acromag AP484.
Support for internal or external triggering simplifies the synchronization of operations to specific events.
Designed for COTS applications these RS422 counter/timers deliver high-speed and high-performance.
AcroPack modules are RoHS compliant and ideal for military, defense, automation, aerospace, scientific, and development labs industries.
The AP484 module is 70mm long, this is 19.05mm longer than the full-length mini-PCIe card at 50.95mm. The board’s width is the same as mPCIe board of 30mm and they use the same mPCIe standard board hold down standoff and screw keep out areas.
A down facing 100 pin Samtec connector will mate with the carrier card. Fifty of these signals are available as field I/O signals.
The AP484 maintains the same functionality and memory map of the existing Industry Pack modules providing a smooth transition to the AcroPack I/O modules.
Performance Specifications
Counter/timers
Counter/timer configuration: AP484: Six 32-bit counters – RS422/RS485.
Clock frequency: Selectable internal clock frequencies: 1.95MHz, 3.9MHz, 7.81MHz, 15.62MHz, or 62.5MHz..
Minimum input event: 32nS.
Minimum pulse measurement: 32nS.
Minimum period measurement: 64nS.
Minimum gate/trigger pulse: 32nS.
Interrupts: Supported for watchdog timer time-out, event count complete, pulse width or periodic rate measurement complete, pulse wave complete (one-shot mode), successive waveform generation (continuous).
Triggering/gate: Programmable via register write or external trigger. Minimum pulse width 32nS. Line may be used for gating of counter.
Counter trigger: Interface for triggering counter functions. Input level is RS422 differential digital.
Counter input: Interface for events and pulse/period measurements. Also triggers load of watchdog timer register. Level is RS422 differential digital.
Counter output: Level is RS422 differential digital.
PCI Express Base Specification
Conforms to revision 2.1
Lanes: 1 lane in each direction.
Bus Speed: 2.5 Gbps (Generation 1).
Memory: 4k space required; 1 base address register.
Environmental
Operating temperature: -40 to 70°C; -40 to 85°C (requires an AcroPack heatsink conduction-cool kit).
Storage temperature: -55 to 150°C.
Relative humidity: 5 to 95% non-condensing.
Power: 3.3V DC ± 5%; 1.6A typical, 2.0A maxium.
Physical
Length: 70mm.
Width: 30mm
- PCI Express Generation 1 interface.
- Mix and match countless I/O combinations in a single slot.
- Sample software and diagnostics.
- 62.5MHz clock time base.
- Single counter/timer modes:
– Event counting
– Frequency measurement
– Period/pulse-width measurement
– Quadrature position measurement
– Square wave/pulse train generation
– Time/period interrupter
– Pulse width generation - Most configuration is handled by a single register which minimizes programming.
- Solid-down connector I/O interface.
- Wide temperature range.
- XMC, VPX and PCIe carriers.
- Linux®, Windows®, and VxWorks® support.
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
$120Select options
Additional information
Weight | 0.8 oz |
---|---|
Dimensions | 3.25 × 1.25 × 1 in |
Part Number | AP484E-LF: RS232, six 32-bit counters |
Product Series | AcroPack Series |
-
Description
Support for internal or external triggering simplifies the synchronization of operations to specific events.
Designed for COTS applications these RS422 counter/timers deliver high-speed and high-performance.
AcroPack modules are RoHS compliant and ideal for military, defense, automation, aerospace, scientific, and development labs industries.
The AP484 module is 70mm long, this is 19.05mm longer than the full-length mini-PCIe card at 50.95mm. The board’s width is the same as mPCIe board of 30mm and they use the same mPCIe standard board hold down standoff and screw keep out areas.
A down facing 100 pin Samtec connector will mate with the carrier card. Fifty of these signals are available as field I/O signals.
The AP484 maintains the same functionality and memory map of the existing Industry Pack modules providing a smooth transition to the AcroPack I/O modules.
Performance Specifications
Counter/timers
Counter/timer configuration: AP484: Six 32-bit counters – RS422/RS485.
Clock frequency: Selectable internal clock frequencies: 1.95MHz, 3.9MHz, 7.81MHz, 15.62MHz, or 62.5MHz..
Minimum input event: 32nS.
Minimum pulse measurement: 32nS.
Minimum period measurement: 64nS.
Minimum gate/trigger pulse: 32nS.
Interrupts: Supported for watchdog timer time-out, event count complete, pulse width or periodic rate measurement complete, pulse wave complete (one-shot mode), successive waveform generation (continuous).
Triggering/gate: Programmable via register write or external trigger. Minimum pulse width 32nS. Line may be used for gating of counter.
Counter trigger: Interface for triggering counter functions. Input level is RS422 differential digital.
Counter input: Interface for events and pulse/period measurements. Also triggers load of watchdog timer register. Level is RS422 differential digital.
Counter output: Level is RS422 differential digital.PCI Express Base Specification
Conforms to revision 2.1
Lanes: 1 lane in each direction.
Bus Speed: 2.5 Gbps (Generation 1).
Memory: 4k space required; 1 base address register.Environmental
Operating temperature: -40 to 70°C; -40 to 85°C (requires an AcroPack heatsink conduction-cool kit).
Storage temperature: -55 to 150°C.
Relative humidity: 5 to 95% non-condensing.
Power: 3.3V DC ± 5%; 1.6A typical, 2.0A maxium.Physical
Length: 70mm.
Width: 30mm -
Features & Benefits
- PCI Express Generation 1 interface.
- Mix and match countless I/O combinations in a single slot.
- Sample software and diagnostics.
- 62.5MHz clock time base.
- Single counter/timer modes:
– Event counting
– Frequency measurement
– Period/pulse-width measurement
– Quadrature position measurement
– Square wave/pulse train generation
– Time/period interrupter
– Pulse width generation - Most configuration is handled by a single register which minimizes programming.
- Solid-down connector I/O interface.
- Wide temperature range.
- XMC, VPX and PCIe carriers.
- Linux®, Windows®, and VxWorks® support.
-
Specs & Data Sheets
-
Software
APSW-API-LNX (Log in to download the file) -
Accessories
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
$120Select options
-
-
Additional information
Additional information
Weight 0.8 oz Dimensions 3.25 × 1.25 × 1 in Part Number AP484E-LF: RS232, six 32-bit counters
Product Series AcroPack Series
Please login to submit this form.