Mezzanine I/O Modules for COM Express

• LVDS I/O and plug-In I/O modules
• XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices

Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.

• Independent D/A converters on each channel
• 10µS settling time
• Three output ranges

Consult factory for long-term availability. Eight 16-bit D/A converter (DACs) to provide highly-accurate analog voltage outputs. A unique two-piece board design brings the proven reliability of Acromag’s IndustryPack^® (IP) A/D modules to a PMC format. An IP230A module is embedded on a PMC interface card that maintains maximum performance and transparent communication to the host.

• 16 differential or 32 single-ended inputs
• 125KHz throughput
• 8µS/conversion
• Selectable input range (±5V, ±10V, 0-5V, 0-10V)

Many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.

• 16 differential inputs (two 8-channel groups)
• Eight 14-bit A/D
• 125KHz throughput
• 8µS conversion time for 8-channel group
• 512 sample FIFO buffer
• ±10V input range

Sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank.

Consult factory for long-term availability.

• 32 bi-directional digital inputs and/or outputs
• 0-60V DC input and output range
• Low-side output switches
• Outputs sink up to 1A per channel
• Change-of-state and level interrupts  (up to 8 channels)

• 24 differential I/O, 16 TTL I/O
• Four 16-bit counter/timer channels,  six operating modes
• Change of state and level interrupts

The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.

Consult factory for long-term availability.

• 64 TTL bi-directional I/O
• Four 16-bit counter/timer channels with six operating modes
• Change of state and level interrupts

• Four 16-bit counters - TTL, and four 32-bit counters - RS422
• Event counter
• Frequency measurement
• Quadrature position measurement
• Pulse-width or periodic rate monitor

 

• Six 32-bit counters - RS422
• Event counter
• Frequency measurement
• Quadrature position measurement
• Pulse-width or periodic rate monitor

 

• 8 asynchronous EIA/TIA-232E serial ports
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 120Kbps)

These modules provide eight asynchronous serial communication ports from a single PMC Socket.  

• 8 asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 1.8432Mbps)

These modules provide eight asynchronous serial communication ports from a single PMC Socket.

• 16D/32SE channels, 16-bit A/D
• 8 channels, 16-bit D/A
• 16 TTL input/outputs
• 32-bit counter/timer

Consult factory for long-term availability.

• Quad RJ45, SFP, or rear ports
• Intel® I350 Controller
• Conduction-cooled version available

Acromag’s XMC610 series provides up to four independent gigabit Ethernet interface ports. Different models feature RJ45, SFP, or rear connectors with conduction cooling support. Intel’s I350 quad gigabit Ethernet controller delivers high-performance and offers many powerful networking capabilities. Click here to watch a short video highlighting the XMC610 Series.

• Quad SFP+ ports
• Intel® XL710 Controller
• PCIe Gen 3 x8 interface
• Extended temperature operation

Acromag’s XMC631 module provides up to four 10-GbE interface ports. Different models are available for extended temperature operation and VITA 42/61 connector options to support a PCIe Gen 3 interface. Four SFP+ ports support optical or copper cabling. Click here to watch a short AcroMaggie video highlighting Acromag's XMC630 Series.

• Dual XAUI ports
• Intel® XL710 Controller
• PCIe Gen 3 x8 interface
• Conduction-cooled

Acromag’s XMC632 module provides up to two 10-GbE XAUI interface ports. Different models are available for VITA 42/61 connector options to support a PCIe Gen 3 interface. The rugged, rear I/O design is ready for use in conduction-cooled systems for extreme temperature environments. Click here to watch a short AcroMaggie video highlighting Acromag's XMC630 Series.