Click to zoom
$195
Clear
Product short description:
  • USB Programmable
  • Plug-In Input Modules
  • Dual Current or Voltage Output
  • 6-32V DC Power
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The uBSP carrier is used with plug-in Acromag microBlox (uB) input modules to build a flexible signal splitter/duplicator. Select from a variety of uB modules to match your input signal type for conversion to two proportional process current or voltage outputs. A third auxiliary voltage output is driven directly by the uB module.

High-voltage isolation separates the input from each output circuit. The isolation protects from surges, reduces noise, and eliminates ground loop errors.

Setup is fast and easy with a USB connection to your PC and our Windows software. Acromag’s Agility™ mobile app enables configuration on an Android smart phone or tablet. Software simplifies I/O range scaling, calibration, and advanced signal processing capabilities.

These rugged instruments withstand harsh industrial environments to operate reliably across a wide temperature range with very low drift. They feature high immunity to RFI, EMI, ESD, and EFT, plus low radiated emissions.

Performance Specifications

USB Interface

USB Connector: USB Mini-B type socket, 5-pin. 5.0 meters cable length maximum. No driver required.
USB Data Rate: 12Mbps. USB v1.1 and 2.0 compatible
USB Transient Protection: Transient voltage suppression on power and data lines

Input

microBlox® uB Modules: Input specifications are dependent on the input module plugged into the carrier. Please see data sheets for individual uB modules for details.

Split Outputs (Two Signals, Active)

Accuracy:
Range                  Over-Range                     Resolution
±10V                            ±11V                            1 part in 59577
±5V                              ±5.5V                           1 part in 59577
0 to 10V                  –0 to +11V                    1 part in 59577
0 to 5V                    –0 to +5.5V                   1 part in 59577
0 to 20mA               0 to 24mA                   1 part in 54612
4 to 20mA               0 to 24mA                   1 part in 43689

Output Load
Voltage output: 1K ohms minimum (5mA max).
Current output: 0-525 ohms for 21mA DC.
Output Accuracy: Better than ±0.05% of span, typical, ±0.1% max
Output Ripple: Less than ±0.1% of output span, typical
Output Ambient Temperature Drift: Better than ±80ppm/°C (±0.0080%/°C)
Output Response Time: Varies with input module. Refer to uB module specification and add 7ms for carrier response time.

AUX Voltage Ouput

The local AUX voltage output is equivalent to that produced by the microBlox® module itself when plugged into this carrier. Its signal return COM is common to the USB signal ground, which may be common to earth ground of the host PC if not using a USB isolator.
Voltage Range (AUX): 0-5V, ±5V, or 1-5V, equivalent to the microBlox module voltage output. Refer to module specifications.
Accuracy (AUX): ±0.05% of span typical (from module). Refer to your module specifications for details.

Environmental

Operating temperature: -40 to 75°C (-40° to 167°F)
Storage temperature: -40 to 85°C (-40 to 185°F)
Relative humidity: 5 to 95% non-condensing
Power Requirement: 6-32V DC external supply, 1.5W max
Isolation: 1500V AC peak. 250V AC (354V DC) continuous between input, output, and power circuits.
Shock and Vibration Immunity:
Vibration: 4g, per IEC 60068-2-64
Shock: 25g, per IEC 60068-2-27
Approvals:
CE compliant. Designed for UL/cUL Class I Division 2 Groups ABCD, ATEX / IECEx Zone 2.
II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C
Electromagnetic Compatibility (EMC) Compliance:
Radiated Emissions: BS EN 61000-6-4, CISPR 16
RFI: BS EN 61000-6-2, IEC 61000-4-3
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6
ESD: BS EN 61000-6-2, IEC 61000-4-2
EFT: BS EN 61000-6-2, IEC 61000-4-4
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5

Physical

Dimensions:
Width = 75.2mm (2.96” along rail)
Height = 72.0mm (2.83” perpendicular to rail)
Depth = 36mm (1.42” vertical w/o modules)
Note that plug-in module extends 1.4” above splitter panel (max. depth of 71mm or 2.8”).
Input, Output, and Power Connectors: Fixed type terminal blocks rated for 12A/250V; AWG #28-16, stranded or solid copper wire.
Carrier Material: Self-extinguishing polyamide, UL94 V-0 rated, color light gray (black end caps). General purpose NEMA Type 1 enclosure.
Circuit Board: Military grade fire-retardant epoxy glass per PC-4101/98
DIN-Rail Mounting: 35x15mm, T-type DIN rails
Unit Weight: 0.25 lbs. (0.12 kg). 0.5 lbs. (0.24 kg) packed

  • Easy configuration via USB with Windows® software or Agility app for Android
  • Wide selection of plug-in signal conditioning
    modules for a variety of input signal types

    • DC millivolt or voltage
    • DC current or 2-wire transmitter w/excitation
    • Thermocouple (J, K, T, R, S)
    • RTD, Pt 100 ohm (2/3/4-wire)
  • Dual scalable current or voltage outputs
    (0-20mA , 4-20mA, ±5V, ±10V, 0-5V, 0-10V)
  • Third auxiliary 0-5V output
  • Input can scale differently at each output
  • User-selectable filtering (none, low, med, high)
  • Supports reverse-acting (inverse) output
  • High accuracy, linearity, stability, and reliability
  • 1500V isolation
  • Shock (25g) and vibration (4g) resistant
  • Wide ambient operation (-40 to 75°C)
  • CE compliant. UL/cUL Class I Div 2, ATEX / IECEx Zone 2 approvals

Specs & Catalogs

Manuals

uBSP-P-1 User Manual (Log in to download the file)

  • Compare

    5020-350: Toroidal AC Current Sensor

    • AC Current Sensor to precondition an AC current input signal
    • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
    $45
    Select options
  • Compare

    Agility Config Tool

    • Agility Config Tool mobile application.
    • Download available on Google Play and iTunes for free.
    • Download Windows configuration software from the software tab below.
    Read more
  • Compare

    TTC-SIP: Software

    • Software Interface Package for Acromag DT, ST, TT Series Transmitters and SP, uBSP Series Signal Splitters.
    • Includes configuration sofware CD-ROM (5040-944), isolator (USB-ISOLATOR) and two USB cable (4001-112, 4001-113) (Recommend one kit per customer.)
    • Easy setup and digital calibration via USB with Windows configuration software.
    • Download the configuration software only from the Software Tab below
    $40$160
    Select options
  • Compare

    uB30, uB40: milliVolt Field Input Module

    • Bluetooth® wireless configuration option
    • Narrow or wide band mV field input
    • Voltage host output
    $95$225
    Select options
  • Compare

    uB31, uB41: DC Voltage Field Input Module

    • Bluetooth® wireless configuration option
    • Narrow or wide band voltage field input
    • Host voltage output
    $90$225
    Select options
  • Compare

    uB32: Narrow Band DC Current Field Input Module

    • Bluetooth® wireless configuration option
    • Narrow band DC current field input
    • Voltage host output
    $100$220
    Select options
  • Compare

    uB34, uB35: Platinum RTD Field Input Module

    • Bluetooth® wireless configuration option
    • Platinum RTD (2,3, or 4-wire) field input
    • Voltage host output
    $115$240
    Select options
  • Compare

    uB37, uB47: Thermocouple Field Input Module

    • Bluetooth® wireless configuration option
    • Thermocouple field input
    • Voltage host output
    $100$240
    Select options
  • Compare

    uB42: 2-Wire Transmitter Field Input Module with Loop Excitation

    • Bluetooth® wireless configuration option
    • DC current input - 2-wire loop excitation
    • Voltage host output
    $125$250
    Select options
  • Compare

    USB Cables

    Various USB cables
    $10$15
    Select options

Additional information

Weight 16 oz
Dimensions 12 × 13 × 3 in
Part Number

4001-112: ,Type A to Type B, 4001-113: Type A to Mini-B, 5028-565: Micro USB to USB OTG, 4001-095: USB-to-DB9

  • Description

  • Features & Benefits

    • Easy configuration via USB with Windows® software or Agility app for Android
    • Wide selection of plug-in signal conditioning
      modules for a variety of input signal types

      • DC millivolt or voltage
      • DC current or 2-wire transmitter w/excitation
      • Thermocouple (J, K, T, R, S)
      • RTD, Pt 100 ohm (2/3/4-wire)
    • Dual scalable current or voltage outputs
      (0-20mA , 4-20mA, ±5V, ±10V, 0-5V, 0-10V)
    • Third auxiliary 0-5V output
    • Input can scale differently at each output
    • User-selectable filtering (none, low, med, high)
    • Supports reverse-acting (inverse) output
    • High accuracy, linearity, stability, and reliability
    • 1500V isolation
    • Shock (25g) and vibration (4g) resistant
    • Wide ambient operation (-40 to 75°C)
    • CE compliant. UL/cUL Class I Div 2, ATEX / IECEx Zone 2 approvals
  • Specs & Data Sheets

    Specs & Catalogs

    Manuals

    uBSP-P-1 User Manual (Log in to download the file)

  • Accessories

    • Compare

      5020-350: Toroidal AC Current Sensor

      • AC Current Sensor to precondition an AC current input signal
      • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
      $45
      Select options
    • Compare

      Agility Config Tool

      • Agility Config Tool mobile application.
      • Download available on Google Play and iTunes for free.
      • Download Windows configuration software from the software tab below.
      Read more
    • Compare

      TTC-SIP: Software

      • Software Interface Package for Acromag DT, ST, TT Series Transmitters and SP, uBSP Series Signal Splitters.
      • Includes configuration sofware CD-ROM (5040-944), isolator (USB-ISOLATOR) and two USB cable (4001-112, 4001-113) (Recommend one kit per customer.)
      • Easy setup and digital calibration via USB with Windows configuration software.
      • Download the configuration software only from the Software Tab below
      $40$160
      Select options
    • Compare

      uB30, uB40: milliVolt Field Input Module

      • Bluetooth® wireless configuration option
      • Narrow or wide band mV field input
      • Voltage host output
      $95$225
      Select options
    • Compare

      uB31, uB41: DC Voltage Field Input Module

      • Bluetooth® wireless configuration option
      • Narrow or wide band voltage field input
      • Host voltage output
      $90$225
      Select options
    • Compare

      uB32: Narrow Band DC Current Field Input Module

      • Bluetooth® wireless configuration option
      • Narrow band DC current field input
      • Voltage host output
      $100$220
      Select options
    • Compare

      uB34, uB35: Platinum RTD Field Input Module

      • Bluetooth® wireless configuration option
      • Platinum RTD (2,3, or 4-wire) field input
      • Voltage host output
      $115$240
      Select options
    • Compare

      uB37, uB47: Thermocouple Field Input Module

      • Bluetooth® wireless configuration option
      • Thermocouple field input
      • Voltage host output
      $100$240
      Select options
    • Compare

      uB42: 2-Wire Transmitter Field Input Module with Loop Excitation

      • Bluetooth® wireless configuration option
      • DC current input - 2-wire loop excitation
      • Voltage host output
      $125$250
      Select options
    • Compare

      USB Cables

      Various USB cables
      $10$15
      Select options
  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 12 × 13 × 3 in
    Part Number

    4001-112: ,Type A to Type B, 4001-113: Type A to Mini-B, 5028-565: Micro USB to USB OTG, 4001-095: USB-to-DB9