Click to zoom
$90$225
Clear
Product short description:
  • Field Input: ±1V to ±60V ranges
  • Host Output: 0-5V or ±5V ranges
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The uB30 and uB40 models condition and convert a low-level DC voltage field input signal to a scaled 0-5V or ±5V output. The uB30 has more filtering for low-band applications, while the uB40 relaxes filtering for higher speed applications. uB30 modules are recommended for noisier environments where conversion speed is less of a concern. uB40 modules drive a faster response, but with less filtering for noise.

Acromag’s microBlox® uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, measurement and control systems. Just plug uB modules into 4, 8, or 16-channel back panels in any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal noise and surge protection from ground loops, spikes, and high common mode voltages.

The uBTA carriers are used with Acromag’s microBlox® signal conditioning modules to create powerful alarms that also provide a voltage/current transmitter output. The plug-in modules offer the convenience of wireless field programming on a smartphone or tablet.

Bluetooth® wireless technology versions enable configuration using a smart phone or tablet. Acromag’s Agility™ app, available for Android™ and iOS® mobile devices, helps you vary input/ output ranges and scaling to your specific application. The Agility app can also set an alarm output function with a set-point limit and dead band. Other app functions include polling inputs, trending values in a shareable chart, updating calibration, and diagnostic troubleshooting.

For cost-sensitive projects, a commercial-grade version is available (-CG models). These units offer similar performance, but over a limited temperature range and lack hazloc approvals.

Back panels provide power, I/O wiring terminals, and host access to an industry-standard analog signal bus. Modules are hot-swappable without screws. Data acquisition boards can access all host I/O signals on the DB25 bus connector.

Agility™ Config Tool is available for free.

  • Wide variety of input and output ranges
  • Mixes with different I/O types on compact 4, 8, or 16 channel back panels
  • Select fixed I/O range models or Bluetooth wireless technology user-configurable models
  • Cost-saving commercial-grade versions available for less demanding applications
  • Android® and iOS® apps simplify wireless configuration with a smartphone or tablet
  • Mobile app configures I/O ranges, sets scaling, calibrates and performs diagnostics
  • Optional alarm function with set-point and dead band control driving 0/5V host output
  • Poll and trend I/O values to shareable charts
  • High accuracy, noise immunity, and stability
  • Isolated field-to-host and channel-to-channel (1500Vac peak, 250Vac/354Vdc continuous)
  • Over-molded I/O circuits offer superior shock, vibration, moisture, and dust protection.
  • Wide operating temperature range
  • UL/cUL Class I, Div 2, ABCD and ATEX Zone 2 hazardous location approvals

Specs & Catalogs

Manuals

uB31 and uB41 User Manual (Log in to download the file)

Additional information

Weight 16 oz
Dimensions 13 × 12 × 3 in
Part Number

uB31-01: Input: ±1V, 4Hz, Output: ±5V, uB31-B: Input: Configurable ±1 to ±60V, 4Hz, Configurable ±5V, uB31-01-CG: Commercial Grade, Input: ±1V, 4Hz, Output: ±5V, uB31-02: Input: ±5V, 4Hz, Output: ±5V, uB31-02-CG: Commercial Grade, Input: ±5V, 4Hz, Output: ±5V, uB31-03: Input: ±10V Input, 4Hz, Output: ±5V, uB31-03-CG: Commercial Grade, Input: ±10V Input, 4Hz, Output: ±5V, uB31-04: Input: ±1V Input, 4Hz, Output: 0-5V, uB31-04-CG: Commercial Grade, Input: ±1V Input, 4Hz, Output: 0-5V, uB31-05: Input: ±5V Input, 4Hz, Output: 0-5V, uB31-05-CG: Commercial Grade, Input: ±5V Input, 4Hz, Output: 0-5V, uB31-06: Input: ±10V Input, 4Hz, Output: 0-5V, uB31-06-CG: Commercial Grade, Input: ±10V Input, 4Hz, Output: 0-5V, uB31-07: Input: ±20V Input, 4Hz, Output: ±5V, uB31-07-CG: Commercial Grade, Input: ±20V Input, 4Hz, Output: ±5V, uB31-08: Input: ±20V Input, 4Hz, Output: 0-5V, uB31-08-CG: Commercial Grade, Input: ±20V Input, 4Hz, Output: 0-5V, uB31-09; Input: ±40V Input, 4Hz, Output: ±5V, uB31-09-CG: Commercial Grade, Input: ±40V Input, 4Hz, Output: ±5V, uB31-10: Input: ±40V Input, 4Hz, Output: 0-5V, uB31-10-CG: Commercial Grade, Input: ±40V Input, 4Hz, Output: 0-5V, uB31-12: Input: ±60V Input, 4Hz, Output: ±5V, uB31-12-CG: Commercial Grade, Input: ±60V Input, 4Hz, Output: ±5V, uB31-13: Input: ±60V Input, 4Hz, Output: 0-5V, uB31-13-CG: Commercial Grade, Input: ±60V Input, 4Hz, Output: 0-5V, uB41-01: Input: ±1V, 1KHz, Output: ±5V, uB41-B: Input: Configurable ±1 to ±60V, 1KHz, Configurable ±5V, uB41-01-CG: Commercial Grade, Input: ±1V, 1KHz, Output: ±5V, uB41-02: Input: ±5V, 1KHz, Output: ±5V, uB41-02-CG: Commercial Grade, Input: ±5V, 1KHz, Output: ±5V, uB41-03: Input: ±10V, 1KHz, Output: ±5V, uB41-03-CG: Commercial Grade, Input: ±10V, 1KHz, Output: ±5V, uB41-04: Input: ±1V, 1KHz, Output: 0-5V, uB41-04-CG: Commercial Grade, Input: ±1V, 1KHz, Output: 0-5V, uB41-05: Input: ±5V, 1KHz, Output: 0-5V, uB41-05-CG: Commercial Grade, Input: ±5V, 1KHz, Output: 0-5V, uB41-06: Input: ±10V, 1KHz, Output: 0-5V, uB41-06-CG: Commercial Grade, Input: ±10V, 1KHz, Output: 0-5V, uB41-07: Input: ±20V, 1KHz, Output: ±5V, uB41-07-CG: Commercial Grade, Input: ±20V, 1KHz, Output: ±5V, uB41-08: Input: ±20V, 1KHz, Output: 0-5V, uB41-08-CG: Commercial Grade, Input: ±20V, 1KHz, Output: 0-5V, uB41-09: Input: ±40V, 1KHz, Output: ±5V, uB41-09-CG: Commercial Grade, Input: ±40V, 1KHz, Output: ±5V, uB41-10: Input: ±40V, 1KHz, Output: 0-5V, uB41-10-CG: Commercial Grade, Input: ±40V, 1KHz, Output: 0-5V, uB41-12: Input: ±60V, 1KHz, Output: ±5V, uB41-12-CG: Commercial Grade, Input: ±60V, 1KHz, Output: ±5V, uB41-13: Input: ±60V, 1KHz, Output: 0-5V, uB41-13-CG: Commercial Grade, Input: ±60V, 1KHz, Output: 0-5V

Configuration

Agility Mobile App, Wireless Configuration

Product Series

microBlox uBTA Series

  • Description

    The uB30 and uB40 models condition and convert a low-level DC voltage field input signal to a scaled 0-5V or ±5V output. The uB30 has more filtering for low-band applications, while the uB40 relaxes filtering for higher speed applications. uB30 modules are recommended for noisier environments where conversion speed is less of a concern. uB40 modules drive a faster response, but with less filtering for noise.

    Acromag’s microBlox® uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, measurement and control systems. Just plug uB modules into 4, 8, or 16-channel back panels in any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal noise and surge protection from ground loops, spikes, and high common mode voltages.

    The uBTA carriers are used with Acromag’s microBlox® signal conditioning modules to create powerful alarms that also provide a voltage/current transmitter output. The plug-in modules offer the convenience of wireless field programming on a smartphone or tablet.

    Bluetooth® wireless technology versions enable configuration using a smart phone or tablet. Acromag’s Agility™ app, available for Android™ and iOS® mobile devices, helps you vary input/ output ranges and scaling to your specific application. The Agility app can also set an alarm output function with a set-point limit and dead band. Other app functions include polling inputs, trending values in a shareable chart, updating calibration, and diagnostic troubleshooting.

    For cost-sensitive projects, a commercial-grade version is available (-CG models). These units offer similar performance, but over a limited temperature range and lack hazloc approvals.

    Back panels provide power, I/O wiring terminals, and host access to an industry-standard analog signal bus. Modules are hot-swappable without screws. Data acquisition boards can access all host I/O signals on the DB25 bus connector.

    Agility™ Config Tool is available for free.

  • Features & Benefits

    • Wide variety of input and output ranges
    • Mixes with different I/O types on compact 4, 8, or 16 channel back panels
    • Select fixed I/O range models or Bluetooth wireless technology user-configurable models
    • Cost-saving commercial-grade versions available for less demanding applications
    • Android® and iOS® apps simplify wireless configuration with a smartphone or tablet
    • Mobile app configures I/O ranges, sets scaling, calibrates and performs diagnostics
    • Optional alarm function with set-point and dead band control driving 0/5V host output
    • Poll and trend I/O values to shareable charts
    • High accuracy, noise immunity, and stability
    • Isolated field-to-host and channel-to-channel (1500Vac peak, 250Vac/354Vdc continuous)
    • Over-molded I/O circuits offer superior shock, vibration, moisture, and dust protection.
    • Wide operating temperature range
    • UL/cUL Class I, Div 2, ABCD and ATEX Zone 2 hazardous location approvals
  • Specs & Data Sheets

    Specs & Catalogs

    Manuals

    uB31 and uB41 User Manual (Log in to download the file)

  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 13 × 12 × 3 in
    Part Number

    uB31-01: Input: ±1V, 4Hz, Output: ±5V, uB31-B: Input: Configurable ±1 to ±60V, 4Hz, Configurable ±5V, uB31-01-CG: Commercial Grade, Input: ±1V, 4Hz, Output: ±5V, uB31-02: Input: ±5V, 4Hz, Output: ±5V, uB31-02-CG: Commercial Grade, Input: ±5V, 4Hz, Output: ±5V, uB31-03: Input: ±10V Input, 4Hz, Output: ±5V, uB31-03-CG: Commercial Grade, Input: ±10V Input, 4Hz, Output: ±5V, uB31-04: Input: ±1V Input, 4Hz, Output: 0-5V, uB31-04-CG: Commercial Grade, Input: ±1V Input, 4Hz, Output: 0-5V, uB31-05: Input: ±5V Input, 4Hz, Output: 0-5V, uB31-05-CG: Commercial Grade, Input: ±5V Input, 4Hz, Output: 0-5V, uB31-06: Input: ±10V Input, 4Hz, Output: 0-5V, uB31-06-CG: Commercial Grade, Input: ±10V Input, 4Hz, Output: 0-5V, uB31-07: Input: ±20V Input, 4Hz, Output: ±5V, uB31-07-CG: Commercial Grade, Input: ±20V Input, 4Hz, Output: ±5V, uB31-08: Input: ±20V Input, 4Hz, Output: 0-5V, uB31-08-CG: Commercial Grade, Input: ±20V Input, 4Hz, Output: 0-5V, uB31-09; Input: ±40V Input, 4Hz, Output: ±5V, uB31-09-CG: Commercial Grade, Input: ±40V Input, 4Hz, Output: ±5V, uB31-10: Input: ±40V Input, 4Hz, Output: 0-5V, uB31-10-CG: Commercial Grade, Input: ±40V Input, 4Hz, Output: 0-5V, uB31-12: Input: ±60V Input, 4Hz, Output: ±5V, uB31-12-CG: Commercial Grade, Input: ±60V Input, 4Hz, Output: ±5V, uB31-13: Input: ±60V Input, 4Hz, Output: 0-5V, uB31-13-CG: Commercial Grade, Input: ±60V Input, 4Hz, Output: 0-5V, uB41-01: Input: ±1V, 1KHz, Output: ±5V, uB41-B: Input: Configurable ±1 to ±60V, 1KHz, Configurable ±5V, uB41-01-CG: Commercial Grade, Input: ±1V, 1KHz, Output: ±5V, uB41-02: Input: ±5V, 1KHz, Output: ±5V, uB41-02-CG: Commercial Grade, Input: ±5V, 1KHz, Output: ±5V, uB41-03: Input: ±10V, 1KHz, Output: ±5V, uB41-03-CG: Commercial Grade, Input: ±10V, 1KHz, Output: ±5V, uB41-04: Input: ±1V, 1KHz, Output: 0-5V, uB41-04-CG: Commercial Grade, Input: ±1V, 1KHz, Output: 0-5V, uB41-05: Input: ±5V, 1KHz, Output: 0-5V, uB41-05-CG: Commercial Grade, Input: ±5V, 1KHz, Output: 0-5V, uB41-06: Input: ±10V, 1KHz, Output: 0-5V, uB41-06-CG: Commercial Grade, Input: ±10V, 1KHz, Output: 0-5V, uB41-07: Input: ±20V, 1KHz, Output: ±5V, uB41-07-CG: Commercial Grade, Input: ±20V, 1KHz, Output: ±5V, uB41-08: Input: ±20V, 1KHz, Output: 0-5V, uB41-08-CG: Commercial Grade, Input: ±20V, 1KHz, Output: 0-5V, uB41-09: Input: ±40V, 1KHz, Output: ±5V, uB41-09-CG: Commercial Grade, Input: ±40V, 1KHz, Output: ±5V, uB41-10: Input: ±40V, 1KHz, Output: 0-5V, uB41-10-CG: Commercial Grade, Input: ±40V, 1KHz, Output: 0-5V, uB41-12: Input: ±60V, 1KHz, Output: ±5V, uB41-12-CG: Commercial Grade, Input: ±60V, 1KHz, Output: ±5V, uB41-13: Input: ±60V, 1KHz, Output: 0-5V, uB41-13-CG: Commercial Grade, Input: ±60V, 1KHz, Output: 0-5V

    Configuration

    Agility Mobile App, Wireless Configuration

    Product Series

    microBlox uBTA Series