Click to zoom
$360$385
Clear
Product short description:
  • Active-Low Inputs, Sinking Outputs
  • 12 input channels, 0 to 35V DC range
  • 12 to 36V DC
  • High-speed RS-485
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Description

These modules provide an isolated Profibus-DP network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983PB model with tandem I/O provides output level control and status verification in one unit.

Input Range: 0 to 35V DC
Output Range: 0 to 35V DC
Network Communication: Profibus-DP, RS-485 network up to 12Mbaud
Power Requirement: 12 to 36V DC supply required
Approvals:
Profibus PNO certified
CE marked. UL, cUL listed
Class I; Division 2; Groups A, B, C, D

Performance

Input (981 & 983 models)

Input Type:
Twelve active-low, buffered inputs, with a common connection. Built-in 5.6K ohm pullups to excitation terminal socketed for 4-channel groups.
Input Signal Voltage Range: 0 to 35V DC, maximum
Input Impedance: 100K ohms, typical
Input Signal Threshold: TTL compatible with 100mV of hysteresis, typical

Output (982 & 983 models)

Output Type: 12 independent, open-drain, DMOS MOSFET switches
Output Voltage Range: 0 to 35V DC max. (0 to 500mA/channel continuous)
Output ON Resistance: 0.28 ohms maximum

Environmental

Ambient Temperature:
Operating: -25 to 70°C (-13 to 158F)
Storage: -40 to 85°C (-40 to 185°F)
Relative Humidity: 5 to 95%, non-condensing
Isolation:
1500V AC for 60 seconds or 250V AC continuous
3-way isolation between I/O, network, and power

  • Standard Profibus-DP network communication with industry-standard ASIC (Siemens SPC3)
  • 12-channel stand-alone module has far lower start-up cost than multi-piece block I/O systems
  • 0-35V DC solid-state logic interface can monitor or control a wide variety of devices
  • Bidirectional I/O models facilitate loop-back monitoring of the output state
  • Socketed SIP resistors provide input and output 5.6K ohm pull-ups to the excitation supply
  • Three selectable failsafe modes (off, last-state, or pre-defined) help prevent unsafe conditions
  • Compact packaging with pluggable terminals saves space and simplifies wiring
  • Wide operational temperature range permits installation in extreme environments: -25 to 70°C (-13 to 158F)
WHITEPAPER: Introduction to Profibus DP (Log in to view the file)

Manuals

981PB, 982PB, 983PB User Manual (Log in to download the file)

Profibus-DP GSD Files (Log in to download the file)
  • Compare

    20RM-16-DIN: 19” rack-mount kit with DIN rail

    • 19" rack-mount kit with DIN rail
    $175
    Read more
  • Compare

    4001-095: USB-to-Serial Adapter

    • USB-to-serial adapter
    • Easy to use to setup and re-configure modules
    $35
    Read more
  • Compare

    5020-350: Toroidal AC current sensor

    Acromag’s AC current sensor Model 5020-350 Several Acromag transmitters with DC current input can be used used in conjunction with an external AC Current Sensor to precondition an AC current input signal. This sensor is a highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
    $45
    Read more
  • Compare

    Profibus-DP GSD Files

    • Download GSD files from the Software Tab
    Read more
  • Compare

    PS5R: Slim Line Power Supplies

    • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
    • Universal Input (85-264V AC / 100-370V DC)
    • Lightweight and compact size
    $95$245
    Select options
  • Compare

    Terminal Block Replacements

    • Simplifies wiring connections on Acromag I/O Modules
    • Barrier strip or spring clamp terminal block kits
    • Provide safe and secure wiring connections
    $25$35
    Read more

Additional information

Weight 8 oz
Dimensions 12 × 13 × 3 in
Part Number

TBK-B01: two 6-position barrier strip style, TBK-B02: four 6-position barrier strip style, TBK-B03: one 3-position and three 6-position barrier strip style, TBK-S01: two 6-position spring clamp style, TBK-S02: four 6-position spring clamp style, TBK-S03: one 3-position and three 6-position spring clamp style

  • Description

    These optional terminal blocks provide safe and secure wiring connections. Large captive screw terminals or spring clamps enable fast, easy connections. Pluggable terminals are removable for simple disconnection of the module without disturbing the wiring.

    Optional terminal blocks are compatible with Acromag’s “white box” modules including BusWorks 900 Series, IntelliPack 800 Series, and isolated transmitters 600 Series.

    Barrier Strip Terminal Blocks

    Wire Range: 12-26 AWG
    Safety Ratings: UL, CSA, CE, TUV.
    Current/Voltage Rating: 15A, 300V.
    Pin Spacing: 5.08mm (0.2”).
    Housing Material: PPO, UL 94 V-0, Black.
    Contacts: Tin-Lead Plated Phosphor Bronze.
    Screw: M3, Nickel Plated Steel.
    Insulation Resistance: ≥105 Megohms.
    Dielectric Withstand: <3000V.

    Spring Clamp Terminal Blocks

    Wire Range: 12-28 AWG.
    Safety Ratings: UL, CSA, CE, TUV.
    Current/Voltage Rating: 15A, 300V.
    Pin Spacing: 5.08mm (0.2”)
    Housing Material: PPO, UL 94 V-0, Black.
    Contacts: Tin-Lead Plated Phosphor Bronze.
    Spring Clamp: Stainless Steel.
    Insulation Resistance: ≥105 Megohms.
    Dielectric Withstand: <3000V.

    Acromag Standard Cage Clamp Terminal Blocks

    Wire Range: 12-24 AWG.
    Current/Voltage Rating: 12A, 300V (UL).
    Pin Spacing: 5.08mm (0.2”).
    Housing Material: UL 94 V-0.
    Terminal: Brass, nickel plated.
    Wire Protector with Contact: Copper alloy tin plating.
    Screw: M3, steel, nickel over copper plating.
    Contact Resistance: ≤10 milliohms per circuit.

  • Features & Benefits

    • Standard Profibus-DP network communication with industry-standard ASIC (Siemens SPC3)
    • 12-channel stand-alone module has far lower start-up cost than multi-piece block I/O systems
    • 0-35V DC solid-state logic interface can monitor or control a wide variety of devices
    • Bidirectional I/O models facilitate loop-back monitoring of the output state
    • Socketed SIP resistors provide input and output 5.6K ohm pull-ups to the excitation supply
    • Three selectable failsafe modes (off, last-state, or pre-defined) help prevent unsafe conditions
    • Compact packaging with pluggable terminals saves space and simplifies wiring
    • Wide operational temperature range permits installation in extreme environments: -25 to 70°C (-13 to 158F)
  • Tech Papers

    WHITEPAPER: Introduction to Profibus DP (Log in to view the file)
  • Specs & Data Sheets

    Manuals

    981PB, 982PB, 983PB User Manual (Log in to download the file)

  • Software

    Profibus-DP GSD Files (Log in to download the file)
  • Accessories

    • Compare

      20RM-16-DIN: 19” rack-mount kit with DIN rail

      • 19" rack-mount kit with DIN rail
      $175
      Read more
    • Compare

      4001-095: USB-to-Serial Adapter

      • USB-to-serial adapter
      • Easy to use to setup and re-configure modules
      $35
      Read more
    • Compare

      5020-350: Toroidal AC current sensor

      Acromag’s AC current sensor Model 5020-350 Several Acromag transmitters with DC current input can be used used in conjunction with an external AC Current Sensor to precondition an AC current input signal. This sensor is a highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
      $45
      Read more
    • Compare

      Profibus-DP GSD Files

      • Download GSD files from the Software Tab
      Read more
    • Compare

      PS5R: Slim Line Power Supplies

      • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
      • Universal Input (85-264V AC / 100-370V DC)
      • Lightweight and compact size
      $95$245
      Select options
    • Compare

      Terminal Block Replacements

      • Simplifies wiring connections on Acromag I/O Modules
      • Barrier strip or spring clamp terminal block kits
      • Provide safe and secure wiring connections
      $25$35
      Read more
  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 12 × 13 × 3 in
    Part Number

    TBK-B01: two 6-position barrier strip style, TBK-B02: four 6-position barrier strip style, TBK-B03: one 3-position and three 6-position barrier strip style, TBK-S01: two 6-position spring clamp style, TBK-S02: four 6-position spring clamp style, TBK-S03: one 3-position and three 6-position spring clamp style