Click to zoom
$207
Clear
Product short description:
  • 6 optocoupler channels
  • 120V AC/DC input with optical isolation
  • Universal 5/12/24V logic output
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The XTA-120V-6 optocoupler module provides six individually isolated 120V AC/DC digital (discrete) inputs to sense on/off levels and drive open-drain outputs. It is intended for use with BusWorks XT Series discrete I/O and other digital input modules to monitor contact closures or mains power supply high/low voltage levels.

Each channel senses the presence or absence of high-level voltage to determine the status of proximity switches, limit switches, toggle switches, push buttons, contacts, and other devices. Opto-isolators control an open-drain output to safely interface the status of the monitored signal.

These modules are very easy to use. Removable front-facing terminal blocks on the module’s top and bottom greatly simplify field wiring.

Rugged construction and high density design combine for a very effective I/O solution. These units are ideal for remote monitoring, distributed control, or SCADA applications.

Input Ranges: 0-130Vrms or ±130V DC
Output Ranges: Open-drain: 1KΩ pull-up to +5.3V DC, 0-32V DC maximum, 150mA sink
Power Requirement: 12 to 32V DC (0.4W)

Performance Specifications

Input

Input Type: Six individually isolated voltage inputs interface voltage levels. Built-in hysteresis provides a sensing threshold for monitoring mains power.
Input Signal Voltage Range: 0-130Vrms or ±130V DC
Input Signal Threshold:
Low-to-High threshold: 90V AC or DC, typical.
High-to-Low threshold: 60V AC (55V DC), typical.
Input Hysteresis: 30V DC, typical
Input Impedance: 46K ohms, typical
Input Over-Voltage Protection:
Metal Oxide Varistors (MOV) at every channel input. Rated Continuous Voltage: 130Vrms, 130V DC.
Rated Maximum Clamping Voltage: 340V DC.
Input channels also include capacitive filtering, and series resistance.

Output

Output Type: Six open-drain, mosfet switches with a common source connection at output return. Low-side (sinking) switching between load and return for DC voltage and current-sinking applications only. Output channels are pulled up to +5.3V with 1KΩ resistors.
Output “OFF” Voltage Range: 0-32V DC maximum
Output “OFF” Leakage Current: 1µA typical, 50µA maximum (mosfet only, 25°C, 32V DC)
Output Pull-Ups: 1KΩ pull-ups to 5.3V DC

Output Activation:
Input                                  Output
HIGH > 90V AC/DC      5.3V (OFF)
LOW < 60V AC/DC           0V (ON)

Output “ON” Current Range: 0 to 150mA DC, continuous, each channel
Output Rds On Resistance: 2.5 ohms, maximum (150mA, 85°C)

Output Response Time: 45ms, typical (measured from input transition to output)
Output Pull-ups: Individual output channels include 1KΩ pull-ups to the internal +5.3V DC rail. If a stronger pull-up (lower resistance) is required, a resistor will have to be wired externally in parallel with the output channel.
Note: Do not exceed 150mA of drain current per output channel.

Environmental

Operating Temperature: -40 to 70°C (-40 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Relative Humidity: 5 to 95% non-condensing

Power Requirement:
12–32V DC SELV (Safety Extra Low Voltage). Current draw varies with power voltage as follows (current indicated is with all outputs ON)
Power Supply                  Current Draw
12V DC                     23mA typical, 25mA maximum
15V DC                     19mA typical, 21mA maximum
24V DC                    13mA typical, 15mA maximum
32V DC                    11mA typical, 12mA maximum

Power Supply Effect: Less than ±0.001% of output span effect per volt DC of supply change.
Isolation:
Inputs isolated from each other (channel-to-channel) and from output/power.
Peak: 1500V AC, ANSI/ISA-82.01-1988
Continuous: 250V AC, 354V DC
Shock and Vibration Immunity:
Vibration: 4g, per IEC 60068-2-64
Shock: 25g, per IEC 60068-2-27
Electromagnetic Compatibility (EMC) Compliance:
Radiated Emissions: BS EN 61000-6-4, CISPR 16
RFI: BS EN 61000-6-2, IEC 61000-4-3
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6
ESD: BS EN 61000-6-2, IEC 61000-4-2
EFT: BS EN 61000-6-2, IEC 61000-4-4
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5
Approvals:
CE compliant. UL/cUL listings. ATEX Certified.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C

Physical

General: General purpose plastic enclosure for mounting on 35mm “T-type” DIN rail.
Case Material: Self-extinguishing polyamide, UL94 V-0 rated, color light gray. General purpose NEMA Type 1 enclosure.
Circuit Board: Military grade fire-retardant epoxy glass per IPC-4101/98 with humi-seal conformal coating.
I/O Connectors: Removable plug-in type terminal blocks rated for 12A/250V; AWG #26-12, stranded/solid copper wire
Dimensions:
Width = 22.5mm (0.9 inches)
Length = 114.5mm (4.51 inches)
Depth = 99.0mm (3.90 inches)
Shipping Weight: 0.5 pounds (0.22 Kg) packed

 

  • Input ranges: 0-130V RMS, 130V DC
  • Output ranges: Open-Drain with 1K Ohm pull-up to 5.3V DC; 0-32V DC Maximum, 150mA sink
  • Power Requirement: 12 to 32V DC (0.4W)
  • Six high-level voltage input channels
  • Six logic-level output channels (open-drain, low-side switches)
  • Built-in hysteresis optimized for mains power at 120Vrms
  • Outputs include 1KΩ pull-ups to 5.3V DC
  • High-density 22.5mm wide package with pluggable, front-facing terminals
  • 1500V AC isolation (between each input and power/output) and surge/transient protection
  • Supports bussed/rail and redundant power
  • -40°C to 70°C wide temperature operation
  • Withstands 25g shock and 4g vibration
  • CE and UL/cUL Class 1 Div 2 Zone 2 approvals
  • ATEX Certified
Ethernet XT Series Configuration Software (Log in to download the file)
Ethernet/IP XT1212 EDS Files (Log in to download the file)
Profibus-DP GSD Files (Log in to download the file)
ESW-MBLIB-DEMO (Log in to download the file)
AMTN-DEMO (Log in to download the file)
ATMX Demo Software (Log in to download the file)
  • Compare

    20RM-16-DIN: 19” rack-mount kit with DIN rail

    • 19" rack-mount kit with DIN rail
    $201.25
    Select options
  • Compare

    5035 Series: Ethernet Cables

    • Ethernet straight cable, CAT5
    • Ethernet crossover cable, CAT5E
    • Low EMI Double-Shielded Ethernet Patch Cable
    $40.25$126.50
    Read more
  • Compare

    AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

    • Modbus/TCP or Modbus/RTU
    • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
    • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
    $287.50$379.50
    Select options
  • Compare

    BusWorks XT Connector Kit

    DIN rail bus power/excitation connector kit. Includes one DIN rail bus connector (1005-070), one left-side female connector terminal block (1005-220) and one right side male connector terminal block (1005-221).
    $28.75
    Select options
  • Compare

    DIN Rail: Type T

    • DIN Rail Strip, Type T
    $11.50$23
    Read more
  • Compare

    ESW-MBLIB: Ethernet Modbus C Library Software

    • Universal support for five operating systems
    • C source code provided
    • Demo program included
    $0$356.50
    Read more
  • Compare

    PS5R: Slim Line Power Supplies

    • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
    • Universal Input (85-264V AC / 100-370V DC)
    • Lightweight and compact size
    $109.25$281.75
    Select options
  • Compare

    USB Isolator

    • USB-powered, USB 2.0 and 1.1 compatible
    • 1500V AC / 2100V DC isolation
    • No drivers required
    $113.85
    Select options
  • Compare

    XT-SIP: Software Interface Package

    • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
    • Includes configuration software CD-ROM (XT-CONFIG)
      • isolator (USB-Isolator)
      • Ethernet cable (5035-360)
      • two USB cables (4001-112, 4001-113)
    • Easy setup and digital calibration via USB with Windows configuration software
    • Download software only from the Software Tab below
    $201.25
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

XT-SIP: Software Interface Package

  • Description

  • Features & Benefits

    • Input ranges: 0-130V RMS, 130V DC
    • Output ranges: Open-Drain with 1K Ohm pull-up to 5.3V DC; 0-32V DC Maximum, 150mA sink
    • Power Requirement: 12 to 32V DC (0.4W)
    • Six high-level voltage input channels
    • Six logic-level output channels (open-drain, low-side switches)
    • Built-in hysteresis optimized for mains power at 120Vrms
    • Outputs include 1KΩ pull-ups to 5.3V DC
    • High-density 22.5mm wide package with pluggable, front-facing terminals
    • 1500V AC isolation (between each input and power/output) and surge/transient protection
    • Supports bussed/rail and redundant power
    • -40°C to 70°C wide temperature operation
    • Withstands 25g shock and 4g vibration
    • CE and UL/cUL Class 1 Div 2 Zone 2 approvals
    • ATEX Certified
  • Specs & Data Sheets

  • Software

    Ethernet XT Series Configuration Software (Log in to download the file)
    Ethernet/IP XT1212 EDS Files (Log in to download the file)
    Profibus-DP GSD Files (Log in to download the file)
    ESW-MBLIB-DEMO (Log in to download the file)
    AMTN-DEMO (Log in to download the file)
    ATMX Demo Software (Log in to download the file)
  • Accessories

    • Compare

      20RM-16-DIN: 19” rack-mount kit with DIN rail

      • 19" rack-mount kit with DIN rail
      $201.25
      Select options
    • Compare

      5035 Series: Ethernet Cables

      • Ethernet straight cable, CAT5
      • Ethernet crossover cable, CAT5E
      • Low EMI Double-Shielded Ethernet Patch Cable
      $40.25$126.50
      Read more
    • Compare

      AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

      • Modbus/TCP or Modbus/RTU
      • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
      • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
      $287.50$379.50
      Select options
    • Compare

      BusWorks XT Connector Kit

      DIN rail bus power/excitation connector kit. Includes one DIN rail bus connector (1005-070), one left-side female connector terminal block (1005-220) and one right side male connector terminal block (1005-221).
      $28.75
      Select options
    • Compare

      DIN Rail: Type T

      • DIN Rail Strip, Type T
      $11.50$23
      Read more
    • Compare

      ESW-MBLIB: Ethernet Modbus C Library Software

      • Universal support for five operating systems
      • C source code provided
      • Demo program included
      $0$356.50
      Read more
    • Compare

      PS5R: Slim Line Power Supplies

      • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
      • Universal Input (85-264V AC / 100-370V DC)
      • Lightweight and compact size
      $109.25$281.75
      Select options
    • Compare

      USB Isolator

      • USB-powered, USB 2.0 and 1.1 compatible
      • 1500V AC / 2100V DC isolation
      • No drivers required
      $113.85
      Select options
    • Compare

      XT-SIP: Software Interface Package

      • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
      • Includes configuration software CD-ROM (XT-CONFIG)
        • isolator (USB-Isolator)
        • Ethernet cable (5035-360)
        • two USB cables (4001-112, 4001-113)
      • Easy setup and digital calibration via USB with Windows configuration software
      • Download software only from the Software Tab below
      $201.25
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    XT-SIP: Software Interface Package