Click to zoom
$340

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • Dual channels
  • ±1V, ±10V inputs
  • 0-20mA, ±10V outputs
  • 6-32V DC local/bus power

The DT337 model is a four-wire dual transmitter that isolates and converts process-level DC voltage inputs to proportional control signals. Each channel supports DC current or voltage output.

Click here to watch a short video highlighting the features of the DT337.

[DISPLAY_ULTIMATE_PLUS]

DT330 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT337 model is a four-wire dual transmitter that isolates and converts process-level DC voltage inputs to proportional control signals. Each channel supports DC current or voltage output. An optional DIN rail bus can deliver primary or redundant power to multiple units.

High-voltage isolation separates inputs, outputs, and power from each other. Isolation protects from surges, reduces noise, and eliminates ground loop errors.

Setup and calibration are fast and easy with a convenient USB connection to your PC and Acromag’s Windows configuration software. The Android app enables setup with mobile devices.

Advanced signal processing capabilities, variable range input/output, and convenient USB programming make this instrument very versatile. These transmitters can withstand harsh industrial environments and operate reliably across a wide temperature range with very low drift. They feature RFI, EMI, ESD, EFT, and surge protection plus low radiated emissions.

Performance Specifications

IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of a USB isolator like Acromag’s USB-Isolator when configuring a DT330 Series transmitter.

USB Interface

USB Connection
Type: USB Mini-B type socket, 5-pin
Data Rate: 12Mbps. USB v1.1 and 2.0 compatible
Maximum cable length: 5.0 meters
Transient voltage suppression on power and data lines.

USB Driver:

Not required. Uses built-in Human Interface Device (HID) USB drivers of the Windows operating system.

Input (two channels)

Default Configuration/Calibration
Input: ±10V, medium filter
Output: 4 to 20mA
A/D Converters (ADC): Two 24-bit Sigma Delta ADCs (only 16-bits used)
Input Ranges:
Path A: ±1V, 0-1V
Path B: ±5V, ±10V, 0-5V, 0-10V DC
Ambient Temperature Effect: Better than ±80ppm/°C (±0.008%/°C)
Scaling Adjust: Full range
Input Impedance:
Path A: 15MΩ
Path B: 1MΩ
Input Over-Voltage Protection: Bipolar Transient Voltage Suppression (TVS) and diode clamping
Input Filter: RC filter plus variable digital filter (none, low, medium, high)
Input Bandwidth: -3dB @ 34Hz (no filtering)
Noise Rejection:
Common Mode: 100dB, no filter (120dB high filter)
Normal Mode: Path A 7dB, Path B 29dB, 60Hz, no filter. (>80dB med/high filter)

Output (two channels)

D/A Converters (DAC): Two 16-bit D/A converters
Output Ranges:
±10V (±11V maximum)
±5V (±5.5V maximum)
0 to 10V (11V maximum)
0 to 5V (5.5V maximum)
0 to 20mA (24mA maximum)
4 to 20mA (24mA maximum)
Output Accuracy: ±0.05%, typical. ±0.1%, maximum
Output Load:
Voltage output: 1K ohms minimum
Current output: 0-550 ohms
Output Compliance: 11V, typical

Output Response Time (for step input change)

Time to reach 98% of output value (typical)
No filtering               25 milliseconds
Low filter                   41 milliseconds
Medium filter        140 milliseconds
High filter             1140 milliseconds

Output Ripple: Less than ±0.1% of output span

Environmental

Operating temperature
Operation: -40 to 70°C (-40° to 158°F)
Storage: -40 to 85°C (-40 to 185°F)
Relative humidity: 5 to 95% non-condensing
Power Requirement: 6-32V DC SELV, 1.6W max
Isolation: 1500V AC peak. 250V AC (354V DC) continuous isolation between inputs, outputs, and power (5-way)
Shock and Vibration Immunity:
Vibration: 4g, per IEC 60068-2-6
Shock: 25g, per IEC 60068-2-27

Approvals
CE compliant. Designed for UL/cUL Class I Division 2 Groups ABCD, ATEX / IECEx Zone 2. II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C

Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16
RFI: BS EN 61000-6-2, IEC 61000-4-3
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6
ESD: BS EN 61000-6-2, IEC 61000-4-2
EFT: BS EN 61000-6-2, IEC 61000-4-4
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5

Physical

General: General-purpose enclosure designed for mounting on 35mm “T-type” DIN rail
Case Material: Self-extinguishing polyamide, UL94 V-0 rated
I/O Connectors: Removable plug-in terminal blocks rated for 12A/250V; AWG #26-12, stranded or solid copper wire
Dimensions: 17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches)
Unit weight: 0.16 kg (0.35 pounds)
Shipping Weight: 0.22 kg (0.5 pounds) packed

  • Operate as a dual transmitter, a single transmitter, or a signal splitter
  • Easy configuration via USB with Windows software or Agility™ app for Android
  • Independently adjustable and scalable input and output ranges
  • Selectable medium voltage input ranges: ±1V, ±5V, ±10V, 0-1V, 0-5V, 0-10V DC
  • Selectable current and voltage output ranges: 0-20mA, 4-20mA, ±5V, ±10V, 0-5V, 0-10V DC
  • Supports reverse-acting (inverse) output
  • High accuracy, linearity, stability, and reliability
  • User-selectable filtering (none, low, med., high)
  • Bus power, local power, or both (redundancy)
  • Space-saving 17.5mm (0.7 inch) unit with pluggable terminals for convenient wiring
  • 1500V input isolation, 5-way, (power/input/output)
  • Wide ambient operation (-40 to 70°C)
  • Approvals: CE compliant. UL/cUL Class I Div 2, ATEX/IECEx Zone 2

Specs & Catalogs

Manuals

DT337 User Manual (Log in to download the file)

DT230 and DT330 Configuration Software (Log in to download the file)
Agility Config Tool (Tethered) (Log in to download the file)
  • Compare

    4001-252: DIN Rail End Stops

    • DIN rail end stop for hazloc approvals
    $10
    Select options
  • Compare

    Agility™ Config Tool (Tethered)

    • Tethered Agility™ Config Tool mobile application
    • For Acromag SP Series Signal Splitters and most TT Series Transmitters
    • Download available on Google Play for free.
    • Download Windows configuration software from the software tab below.
    Read more
  • Compare

    TTC-SIP: Software

    • Software Interface Package for Acromag DT, ST, TT Series Transmitters and SP, uBSP Series Signal Splitters.
    • Includes configuration sofware CD-ROM (5040-xxx), isolator (USB-ISOLATOR) and two USB cable (4001-112, 4001-113) (Recommend one kit per customer.)
    • Easy setup and digital calibration via USB with Windows configuration software.
    • Download the configuration software only - from the Software Tab
    $170
    Select options
  • Compare

    USB Cables

    Various USB cables
    $20
    Select options
  • Compare

    USB Isolator

    • USB-powered, USB 2.0 and 1.1 compatible
    • 1500V AC / 2100V DC isolation
    • No drivers required
    This compact, industrial-grade isolator provides a high-voltage isolation barrier between a computer and a connected USB device.
    $110
    Select options

Additional information

Weight 16 oz
Dimensions 13 × 12 × 3 in
Part Number

DT337-0700: isolated current or voltage outputs

Configuration

Agility Mobile App, Factory Calibration, Windows Software Configuration

Product Series

DT330 Series

  • Description

    DT330 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT337 model is a four-wire dual transmitter that isolates and converts process-level DC voltage inputs to proportional control signals. Each channel supports DC current or voltage output. An optional DIN rail bus can deliver primary or redundant power to multiple units.

    High-voltage isolation separates inputs, outputs, and power from each other. Isolation protects from surges, reduces noise, and eliminates ground loop errors.

    Setup and calibration are fast and easy with a convenient USB connection to your PC and Acromag’s Windows configuration software. The Android app enables setup with mobile devices.

    Advanced signal processing capabilities, variable range input/output, and convenient USB programming make this instrument very versatile. These transmitters can withstand harsh industrial environments and operate reliably across a wide temperature range with very low drift. They feature RFI, EMI, ESD, EFT, and surge protection plus low radiated emissions.

    Performance Specifications

    IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of a USB isolator like Acromag’s USB-Isolator when configuring a DT330 Series transmitter.

    USB Interface

    USB Connection
    Type: USB Mini-B type socket, 5-pin
    Data Rate: 12Mbps. USB v1.1 and 2.0 compatible
    Maximum cable length: 5.0 meters
    Transient voltage suppression on power and data lines.

    USB Driver:

    Not required. Uses built-in Human Interface Device (HID) USB drivers of the Windows operating system.

    Input (two channels)

    Default Configuration/Calibration
    Input: ±10V, medium filter
    Output: 4 to 20mA
    A/D Converters (ADC): Two 24-bit Sigma Delta ADCs (only 16-bits used)
    Input Ranges:
    Path A: ±1V, 0-1V
    Path B: ±5V, ±10V, 0-5V, 0-10V DC
    Ambient Temperature Effect: Better than ±80ppm/°C (±0.008%/°C)
    Scaling Adjust: Full range
    Input Impedance:
    Path A: 15MΩ
    Path B: 1MΩ
    Input Over-Voltage Protection: Bipolar Transient Voltage Suppression (TVS) and diode clamping
    Input Filter: RC filter plus variable digital filter (none, low, medium, high)
    Input Bandwidth: -3dB @ 34Hz (no filtering)
    Noise Rejection:
    Common Mode: 100dB, no filter (120dB high filter)
    Normal Mode: Path A 7dB, Path B 29dB, 60Hz, no filter. (>80dB med/high filter)

    Output (two channels)

    D/A Converters (DAC): Two 16-bit D/A converters
    Output Ranges:
    ±10V (±11V maximum)
    ±5V (±5.5V maximum)
    0 to 10V (11V maximum)
    0 to 5V (5.5V maximum)
    0 to 20mA (24mA maximum)
    4 to 20mA (24mA maximum)
    Output Accuracy: ±0.05%, typical. ±0.1%, maximum
    Output Load:
    Voltage output: 1K ohms minimum
    Current output: 0-550 ohms
    Output Compliance: 11V, typical

    Output Response Time (for step input change)

    Time to reach 98% of output value (typical)
    No filtering               25 milliseconds
    Low filter                   41 milliseconds
    Medium filter        140 milliseconds
    High filter             1140 milliseconds

    Output Ripple: Less than ±0.1% of output span

    Environmental

    Operating temperature
    Operation: -40 to 70°C (-40° to 158°F)
    Storage: -40 to 85°C (-40 to 185°F)
    Relative humidity: 5 to 95% non-condensing
    Power Requirement: 6-32V DC SELV, 1.6W max
    Isolation: 1500V AC peak. 250V AC (354V DC) continuous isolation between inputs, outputs, and power (5-way)
    Shock and Vibration Immunity:
    Vibration: 4g, per IEC 60068-2-6
    Shock: 25g, per IEC 60068-2-27

    Approvals
    CE compliant. Designed for UL/cUL Class I Division 2 Groups ABCD, ATEX / IECEx Zone 2. II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C

    Electromagnetic Compatibility (EMC) Compliance
    Radiated Emissions: BS EN 61000-6-4, CISPR 16
    RFI: BS EN 61000-6-2, IEC 61000-4-3
    Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6
    ESD: BS EN 61000-6-2, IEC 61000-4-2
    EFT: BS EN 61000-6-2, IEC 61000-4-4
    Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5

    Physical

    General: General-purpose enclosure designed for mounting on 35mm “T-type” DIN rail
    Case Material: Self-extinguishing polyamide, UL94 V-0 rated
    I/O Connectors: Removable plug-in terminal blocks rated for 12A/250V; AWG #26-12, stranded or solid copper wire
    Dimensions: 17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches)
    Unit weight: 0.16 kg (0.35 pounds)
    Shipping Weight: 0.22 kg (0.5 pounds) packed

  • Features & Benefits

    • Operate as a dual transmitter, a single transmitter, or a signal splitter
    • Easy configuration via USB with Windows software or Agility™ app for Android
    • Independently adjustable and scalable input and output ranges
    • Selectable medium voltage input ranges: ±1V, ±5V, ±10V, 0-1V, 0-5V, 0-10V DC
    • Selectable current and voltage output ranges: 0-20mA, 4-20mA, ±5V, ±10V, 0-5V, 0-10V DC
    • Supports reverse-acting (inverse) output
    • High accuracy, linearity, stability, and reliability
    • User-selectable filtering (none, low, med., high)
    • Bus power, local power, or both (redundancy)
    • Space-saving 17.5mm (0.7 inch) unit with pluggable terminals for convenient wiring
    • 1500V input isolation, 5-way, (power/input/output)
    • Wide ambient operation (-40 to 70°C)
    • Approvals: CE compliant. UL/cUL Class I Div 2, ATEX/IECEx Zone 2
  • Specs & Data Sheets

    Specs & Catalogs

    Manuals

    DT337 User Manual (Log in to download the file)

  • Software

    DT230 and DT330 Configuration Software (Log in to download the file)
    Agility Config Tool (Tethered) (Log in to download the file)
  • Accessories

    • Compare

      4001-252: DIN Rail End Stops

      • DIN rail end stop for hazloc approvals
      $10
      Select options
    • Compare

      Agility™ Config Tool (Tethered)

      • Tethered Agility™ Config Tool mobile application
      • For Acromag SP Series Signal Splitters and most TT Series Transmitters
      • Download available on Google Play for free.
      • Download Windows configuration software from the software tab below.
      Read more
    • Compare

      TTC-SIP: Software

      • Software Interface Package for Acromag DT, ST, TT Series Transmitters and SP, uBSP Series Signal Splitters.
      • Includes configuration sofware CD-ROM (5040-xxx), isolator (USB-ISOLATOR) and two USB cable (4001-112, 4001-113) (Recommend one kit per customer.)
      • Easy setup and digital calibration via USB with Windows configuration software.
      • Download the configuration software only - from the Software Tab
      $170
      Select options
    • Compare

      USB Cables

      Various USB cables
      $20
      Select options
    • Compare

      USB Isolator

      • USB-powered, USB 2.0 and 1.1 compatible
      • 1500V AC / 2100V DC isolation
      • No drivers required
      This compact, industrial-grade isolator provides a high-voltage isolation barrier between a computer and a connected USB device.
      $110
      Select options
  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 13 × 12 × 3 in
    Part Number

    DT337-0700: isolated current or voltage outputs

    Configuration

    Agility Mobile App, Factory Calibration, Windows Software Configuration

    Product Series

    DT330 Series