Click to zoom
$595
Clear
Product short description:
  • 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
  • 16 analog single-ended current input channels
  • 12 to 32V DC Power (2.8W)
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The XT1230 offers an isolated Ethernet network interface for up to to sixteen single-ended current input channels. Single-ended inputs enable a higher channel density to save space and a lower cost per channel.

Rugged construction, high density design, and easy USB-to-PC/Windows setup combine for a very effective and reliable module. These units are ideal for remote monitoring, distributed control, or SCADA applications.

Input Ranges:
DC Current:
0 to 11mA, 0 to 20mA, 4 to 20mA, ±20mA
0 to 20 amps AC (with optional AC sensor)
Ethernet Communication:
Modbus TCP/IP, Ethernet/IP, Profinet, i2o® peer-to-peer, 10/100Base-T(X)
PriorityChannel™ device determinism
Power Requirement: 12 to 32V DC (2.8W)

Performance Specifications

IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of the USB-ISOLATOR when configuring an XT1000 I/O module.

USB Interface

USB Connector:
Type: USB Mini-B type socket, 5-pin
Data Rate: 12Mbps. USB v1.1 and 2.0 compatible
Cable Length: 5.0 meters maximum
USB Transient Protection: Transient voltage suppression on power and data lines
Driver: Not required. Uses Windows (HID) drivers

Input

Accuracy: ±0.05% of span, typical for nominal input ranges
Analog to Digital Converter (A/D): 16-bit Σ-Δ converter. 1.476uA/bit resolution
Noise Rejection: Better than -110dB @ 60Hz
Input Filter Bandwidth: -3dB at 25KHz, typical
Input Conversion Rate: 10ms for all 16 input channels
Input Impedance: 27.4 ohms

Ethernet Communication

Protocols: Modbus TCP/IP, i2o peer-to-peer, Ethernet/IP, or Profinet, depending on model number
Ethernet Communication Controller: Innovasic RapID™ Platform with PriorityChannel™ for determinism at the device regardless of network load
Modbus TCP/IP (slave): Port 502 reserved. Supports up to 10 sockets
i2o Peer-to-Peer (master/slave): Can map each of 16 analog input channels separately to output channels. Timed (1-65535 sec) or percent of change updates. Supports GPRS/GSM systems.
Ethernet/IP (adapter): Supports 10 connections. EDS file on website
Profinet (server): Supports 1 connection. GSDML file on website
Connectors: Two shielded 8-pin RJ-45 sockets, 10BaseT/100BaseTX
Wiring: Auto-crossover for MDI or MDI-X
IP Address: User-configurable. 192.168.1.100 default IP address
Data Rate: Auto-negotiated, 10Mbps or 100Mbps
Compliance: IEEE 802.3, 802.3u, 802.3x

Environmental

Operating temperature: -40 to 70°C (-40 to 158°F)
Storage temperature: -40 to 85°C (-40 to 185°F)
Relative humidity: 5 to 95% non-condensing
MTBF:
463,547 hrs. at 25°C
345,200 hrs. at 40°C
Power Requirement: 12 to 32V DC, 2.8W maximum (113mA maximum @ 24V)
Isolation:
4-way isolation between I/O channels, network (each port), and power
Peak: 1500V AC, ANSI/ISA-82.01-1988
Continuous: 250V AC, 354V DC
Shock and Vibration Immunity:
Vibration: 4g, per IEC 60068-2-64
Shock: 25g, per IEC 60068-2-27
Electromagnetic Compatibility (EMC) Compliance:
Radiated Emissions: BS EN 61000-6-4, CISPR 16
RFI: BS EN 61000-6-2, IEC 61000-4-3
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6
ESD: BS EN 61000-6-2, IEC 61000-4-2
EFT: BS EN 61000-6-2, IEC 61000-4-4
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5
Approvals:
CE compliant. UL/cUL Class I; Div. 2 Zone 2. ATEX Cert. II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C

Physical

General: General purpose plastic enclosure for mounting on 35mm “T-type” DIN rail
Case Material: Self-extinguishing polyamide, UL94 V-0 rated, color light gray. General purpose NEMA Type 1 enclosure
Circuit Board: Military grade fire-retardant epoxy glass (IPC-4101/98)
I/O Connectors: Removable plug-in type terminal blocks rated for 12A/250V; AWG #26-12, stranded/solid copper wire
Dimensions:
Width = 22.5mm (0.9 inches)
Length = 114.5mm (4.51 inches)
Depth = 99.0mm (3.90 inches)
Shipping Weight: 0.5 pounds (0.22 Kg) packed

• Easy setup with Windows software via USB

• Low input impendance (27 ohms) reduces loading on current loops

• User-configurable sample averaging (1-200) on a per-channel basis

• 10ms network updates for all 16 input channels

• i2o peer-to-peer updates based on change-of-state and/or timed updates

• High-resolution 16-bit Σ∆ A/D converter ensures precise, high accuracy measurements

• High-Density 22.5mm wide package with pluggable, front-facing terminals

• Dual Ethernet 10/100 ports (auto-negotiation) reduce switch port requirements

• 1500V AC isolation (between I/O, power, and network ports) and surge/transient protection

• Supports bussed/rail and redundant power

• -40°C to 70°C wide temperature operation

• Withstands 25g shock and 4g vibration

• CE compliant. UL/cUL Class 1 Div 2 Zone 2 approvals.

• ATEX Certified.

Manuals

XT1231 / XT1241 User Manual (Log in to download the file)

XT1232 / XT1242 User Manual (Log in to download the file)

XT1233 / XT1243 User Manual (Log in to download the file)

Ethernet XT Series Configuration Software (Log in to download the file)
Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
Profinet GSDML Files for XTxxx3-000 Modules (Log in to download the file)
ESW-MBLIB-DEMO (Log in to download the file)
AMTN-DEMO (Log in to download the file)
ATMX Demo Software (Log in to download the file)
  • Compare

    20RM-16-DIN: 19” rack-mount kit with DIN rail

    • 19" rack-mount kit with DIN rail
    $175
    Select options
  • Compare

    4001-110: Ethernet Cable

    5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection
    $89
    Select options
  • Compare

    5020-350: Toroidal AC Current Sensor

    • AC Current Sensor to precondition an AC current input signal
    • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
    $45
    Select options
  • Compare

    5035 Series: Ethernet Cables

    • Ethernet straight cable, CAT5
    • Ethernet crossover cable, CAT5E
    • Low EMI Double-Shielded Ethernet Patch Cable
    $35$110
    Read more
  • Compare

    900EN: 5-Port Ethernet Switch

    • 10/100Mbps
    • 15 to 36V DC power supply required
    • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
    $320
    Select options
  • Compare

    AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

    • Modbus/TCP or Modbus/RTU
    • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
    • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
    $250$330
    Select options
  • Compare

    BusWorks XT Connector Kit

    DIN rail bus power/excitation connector kit. Includes one DIN rail bus connector (1005-070), one left-side female connector terminal block (1005-220) and one right side male connector terminal block (1005-221).
    $25
    Select options
  • Compare

    DIN Rail: Type T

    DIN Rail Strip, Type T
    $10$20
    Read more
  • Compare

    EIS-408: Industrial Ethernet Switch with 8 Web-Managed Ports and Redundancy

    • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy
    • 12 to 48V DC power supply required
    • Six copper 10Base-T / 100Base-TX, auto-MDI/MDIX and two fiber optic 100Base-FX, SC connectors
    $1,285
    Select options
  • Compare

    ESW-MBLIB: Ethernet Modbus C Library Software

    • Universal support for five operating systems
    • C source code provided
    • Demo program included
    $0$310
    Read more
  • Compare

    IMC-100A: 10/100BaseTX to 100BaseFX Industrial Media Converter

    • UTP to Fiber Media Converter
    • RJ45 Port Supports Auto MDI/MDI-X Function
    $225$275
    Read more
  • Compare

    PS5R: Slim Line Power Supplies

    • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
    • Universal Input (85-264V AC / 100-370V DC)
    • Lightweight and compact size
    $95$245
    Select options
  • Compare

    Terminal Block Replacements

    • Simplifies wiring connections on Acromag I/O Modules
    • Barrier strip or spring clamp terminal block kits
    • Provide safe and secure wiring connections
    $25$35
    Select options
  • Compare

    USB Isolator

    • USB-powered, USB 2.0 and 1.1 compatible
    • 1500V AC / 2100V DC isolation
    • No drivers required
    $99
    Select options
  • Compare

    USB-to-Ethernet Adapter

    Simplifies configuration of Acromag Ethernet I/O Modules Prevents disruption of existing LANs This device is a USB-to-Ethernet adapter that you can use to communicate with any Acromag Ethernet I/O product for the purpose of setup and re-configuration for your application. It is recommended for initial communication with Acromag Ethernet devices so that you do not have to disrupt your existing network connection.
    $75
    Select options
  • Compare

    XT-SIP: Software Interface Package

    • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
    • Includes configuration software CD-ROM (XT-CONFIG)
      • isolator (USB-Isolator)
      • Ethernet cable (5035-360)
      • two USB cables (4001-112, 4001-113)
    • Easy setup and digital calibration via USB with Windows configuration software
    • Download software only from the Software Tab below
    $175
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

XT-SIP: Software Interface Package

  • Description

  • Features & Benefits

    • Easy setup with Windows software via USB

    • Low input impendance (27 ohms) reduces loading on current loops

    • User-configurable sample averaging (1-200) on a per-channel basis

    • 10ms network updates for all 16 input channels

    • i2o peer-to-peer updates based on change-of-state and/or timed updates

    • High-resolution 16-bit Σ∆ A/D converter ensures precise, high accuracy measurements

    • High-Density 22.5mm wide package with pluggable, front-facing terminals

    • Dual Ethernet 10/100 ports (auto-negotiation) reduce switch port requirements

    • 1500V AC isolation (between I/O, power, and network ports) and surge/transient protection

    • Supports bussed/rail and redundant power

    • -40°C to 70°C wide temperature operation

    • Withstands 25g shock and 4g vibration

    • CE compliant. UL/cUL Class 1 Div 2 Zone 2 approvals.

    • ATEX Certified.

  • Specs & Data Sheets

    Manuals

    XT1231 / XT1241 User Manual (Log in to download the file)

    XT1232 / XT1242 User Manual (Log in to download the file)

    XT1233 / XT1243 User Manual (Log in to download the file)

  • Software

    Ethernet XT Series Configuration Software (Log in to download the file)
    Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
    Profinet GSDML Files for XTxxx3-000 Modules (Log in to download the file)
    ESW-MBLIB-DEMO (Log in to download the file)
    AMTN-DEMO (Log in to download the file)
    ATMX Demo Software (Log in to download the file)
  • Accessories

    • Compare

      20RM-16-DIN: 19” rack-mount kit with DIN rail

      • 19" rack-mount kit with DIN rail
      $175
      Select options
    • Compare

      4001-110: Ethernet Cable

      5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection
      $89
      Select options
    • Compare

      5020-350: Toroidal AC Current Sensor

      • AC Current Sensor to precondition an AC current input signal
      • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
      $45
      Select options
    • Compare

      5035 Series: Ethernet Cables

      • Ethernet straight cable, CAT5
      • Ethernet crossover cable, CAT5E
      • Low EMI Double-Shielded Ethernet Patch Cable
      $35$110
      Read more
    • Compare

      900EN: 5-Port Ethernet Switch

      • 10/100Mbps
      • 15 to 36V DC power supply required
      • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
      $320
      Select options
    • Compare

      AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

      • Modbus/TCP or Modbus/RTU
      • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
      • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
      $250$330
      Select options
    • Compare

      BusWorks XT Connector Kit

      DIN rail bus power/excitation connector kit. Includes one DIN rail bus connector (1005-070), one left-side female connector terminal block (1005-220) and one right side male connector terminal block (1005-221).
      $25
      Select options
    • Compare

      DIN Rail: Type T

      DIN Rail Strip, Type T
      $10$20
      Read more
    • Compare

      EIS-408: Industrial Ethernet Switch with 8 Web-Managed Ports and Redundancy

      • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy
      • 12 to 48V DC power supply required
      • Six copper 10Base-T / 100Base-TX, auto-MDI/MDIX and two fiber optic 100Base-FX, SC connectors
      $1,285
      Select options
    • Compare

      ESW-MBLIB: Ethernet Modbus C Library Software

      • Universal support for five operating systems
      • C source code provided
      • Demo program included
      $0$310
      Read more
    • Compare

      IMC-100A: 10/100BaseTX to 100BaseFX Industrial Media Converter

      • UTP to Fiber Media Converter
      • RJ45 Port Supports Auto MDI/MDI-X Function
      $225$275
      Read more
    • Compare

      PS5R: Slim Line Power Supplies

      • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
      • Universal Input (85-264V AC / 100-370V DC)
      • Lightweight and compact size
      $95$245
      Select options
    • Compare

      Terminal Block Replacements

      • Simplifies wiring connections on Acromag I/O Modules
      • Barrier strip or spring clamp terminal block kits
      • Provide safe and secure wiring connections
      $25$35
      Select options
    • Compare

      USB Isolator

      • USB-powered, USB 2.0 and 1.1 compatible
      • 1500V AC / 2100V DC isolation
      • No drivers required
      $99
      Select options
    • Compare

      USB-to-Ethernet Adapter

      Simplifies configuration of Acromag Ethernet I/O Modules Prevents disruption of existing LANs This device is a USB-to-Ethernet adapter that you can use to communicate with any Acromag Ethernet I/O product for the purpose of setup and re-configuration for your application. It is recommended for initial communication with Acromag Ethernet devices so that you do not have to disrupt your existing network connection.
      $75
      Select options
    • Compare

      XT-SIP: Software Interface Package

      • Software Interface Package for BusWorks XT Series Ethernet I/O modules.
      • Includes configuration software CD-ROM (XT-CONFIG)
        • isolator (USB-Isolator)
        • Ethernet cable (5035-360)
        • two USB cables (4001-112, 4001-113)
      • Easy setup and digital calibration via USB with Windows configuration software
      • Download software only from the Software Tab below
      $175
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    XT-SIP: Software Interface Package