Click to zoom
$2,553$3,070.50
Clear
Product short description:
  • 32-channel differential analog current input
  • Modbus TCP/IP or UDP/IP communication
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

These EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals. Units accept 32 differential analog current inputs, which are ideal for many sensor interface applications in remote zones. Available in an aluminum enclosure or as an open circuit board, both packages stack vertically to maintain a very small footprint. Many other features help increase reliability, improve performance and protect from harsh environments.

Performance Specifications

Analog Field Inputs

Input Channel Configuration:
32 differential analog inputs
16 channels on front and rear panels of unit
DC Current Input Ranges (per-channel basis):
±20mA, 0-20mA, or 4-20mA DC (default)
User-configured on a per-channel basis
Input Scaling (per-channel basis):
Floating Point Format: IEEE-754 32-bit configurable for 12 digits with 4 decimal places
16-bit Signed Integer Format: All channels are represented as ±30,000
Input Resolution and Accuracy:
Resolution: 15-bit maximum, 0.003%
Accuracy: Better than 0.02% of range
Input Impedance: 100 ohms
Input Scan Groups and Scan Times:
Eight user-enabled 4-channel scan groups
5mS (200Hz) update of all 32 channels.
8mS (125Hz) update when totalizing
First 4-channel group updates in 770µS (1.3Khz)
Each additional 4-channel group adds 590µS to update time
Sample Averaging: 0 to 500 samples, user-configurable
Input Overvoltage Protection: Bipolar Transient Voltage Suppressers (TVS), 18V clamp level typical
Noise Rejection: Common Mode (50-60Hz): Better than 72dB

Local Alarm Output

Configuration: Failsafe or non-failsafe (software-configurable) relay trips on power or link-loss failure.
Type: SPST-NO, 1 Form A, Class I, Division II approved.
Rating:
5A @ 24V DC/250V AC, 6000 cycles resistive
3A @ 24V DC/250V AC, 100,000 cycles general
2A @ 24V DC/250V AC, Hazardous locations
Maximum Switching Voltage and Power: 250V AC / 750VA, 125V DC / 90W

Ethernet Interface

Internal Switch or Hub/Repeater: Dual-port Ethernet switch. Web-configurable as a true switch (default mode) or low-latency hub.
Network Connector [10/100 Base-T(X)Copper]:
One or two 8-pin RJ-45 connectors
Automatic MDI/MDI-X
100m communication distance
Network Connector (100 Base-FX Fiber-optic):
One multi-mode duplex SC connector
2km communication distance
Full/half-duplex, selectable
Protocols and Addressing:
Modbus TCP/IP or UDP/IP
StaticIP, DHCP, BootP
Configurable IP addresses
Ethernet Modbus TCP/IP Sockets/Sessions: 1-10 socket/sessions programmable via web page
Ethernet Redundancy: Compatible with STP, RSTP, proprietary schemes.

Environmental

Operating and Storage Temperature:
Operating Ranges: -40 to 70°C (-40 to 158°F)
Storage Range: -40 to 85°C (-40 to 185°F)
Power Requirements:
18-36V DC. Redundant, diode-coupled terminals
4.2W (copper ports), 5.25W (fiber-optic ports)
Ambient Temperature Effect: Less than 25ppm/°C (0.0025%/°C)
Isolation:
I/O, power, relay and Ethernet port-to-port
Peak: 1500V AC, ANSI/ISA-82.01-1988
Continuous: 250V AC, 354V DC

Enclosure and Physical

Housing Classification and Dimensions:
IP20:  8.226” x 2.444” x 7.25”, 4 lbs. packed
PCB:  7.920” x 1.875” x 7.25”, 1.65 lbs. packed
Safety Approvals: UL/cUL Listed
Hazardous Locations: Class I; Div 2; A, B, C, D. Open board units: UL Recognized.
Shock and Vibration Immunity (in enclosure):
Mechanical Shock: 50g (3ms), 30g (11ms)
Random Vibration: 5g, (5-500Hz)

  • 32 differential current analog inputs
  • 4-way isolation and surge suppression
  • Configurable from any web browser
  • High-resolution 16-bit A/D
  • Fast scanning up to 1KHz
  • Dual-format data registers support both 16-bit signed integers and 32-bit floating point formats
  • User-configurable IEEE-754 32-bit floating point scaling registers on all channels
  • User-configurable integration function on all channels with totalizing 32-bit non-volatile counter registers
  • Built-in precision voltage sources for automatic calibration
  • On-demand self-test for built-in calibration sources
  • Operating temperature: -40 to 70°C (-40 to 158°F)
AMTN-DEMO (Log in to download the file)
ATMX Demo Software (Log in to download the file)
ESW-MBLIB-DEMO (Log in to download the file)
Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
  • Compare

    20RM-16-DIN: 19” rack-mount kit with DIN rail

    • 19" rack-mount kit with DIN rail
    $201.25
    Select options
  • Compare

    4001-110: Ethernet Cable

    5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection
    $102.35
    Select options
  • Compare

    5020-350: Toroidal AC Current Sensor

    • AC Current Sensor to precondition an AC current input signal
    • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
    $51.75
    Select options
  • Compare

    5035 Series: Ethernet Cables

    • Ethernet straight cable, CAT5
    • Ethernet crossover cable, CAT5E
    • Low EMI Double-Shielded Ethernet Patch Cable
    $40.25$126.50
    Read more
  • Compare

    900EN: 5-Port Ethernet Switch

    • 10/100Mbps
    • 15 to 36V DC power supply required
    • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
    $368
    Select options
  • Compare

    AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

    • Modbus/TCP or Modbus/RTU
    • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
    • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
    $287.50$379.50
    Select options
  • Compare

    DIN Rail: Type T

    DIN Rail Strip, Type T
    $11.50$23
    Read more
  • Compare

    EIS-408: Industrial Ethernet Switch with 8 Web-Managed Ports and Redundancy

    • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy
    • 12 to 48V DC power supply required
    • Six copper 10Base-T / 100Base-TX, auto-MDI/MDIX and two fiber optic 100Base-FX, SC connectors
    $1,477.75
    Select options
  • Compare

    ESW-MBLIB: Ethernet Modbus C Library Software

    • Universal support for five operating systems
    • C source code provided
    • Demo program included
    $0$356.50
    Read more
  • Compare

    EtherStax Mounting Kits

    • EtherStax mounting accessories
    $23$109.25
    Read more
  • Compare

    IMC-100A: 10/100BaseTX to 100BaseFX Industrial Media Converter

    • UTP to Fiber Media Converter
    • RJ45 Port Supports Auto MDI/MDI-X Function
    $292.50$357.50
    Read more
  • Compare

    PS5R: Slim Line Power Supplies

    • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
    • Universal Input (85-264V AC / 100-370V DC)
    • Lightweight and compact size
    $109.25$281.75
    Select options
  • Compare

    Terminal Block Replacements

    • Simplifies wiring connections on Acromag I/O Modules
    • Barrier strip or spring clamp terminal block kits
    • Provide safe and secure wiring connections
    $28.75$40.25
    Select options
  • Compare

    USB-to-Ethernet Adapter

    Simplifies configuration of Acromag Ethernet I/O Modules Prevents disruption of existing LANs This device is a USB-to-Ethernet adapter that you can use to communicate with any Acromag Ethernet I/O product for the purpose of setup and re-configuration for your application. It is recommended for initial communication with Acromag Ethernet devices so that you do not have to disrupt your existing network connection.
    $86.25
    Select options

Additional information

Weight N/A
Dimensions 12 × 13 × 3 in
Part Number

4001-096: USB Ethernet Adapter

  • Description

    Standards

    USB 1.0, 1.1, 2.0 IEEE 802.3, IEEE 802.3u

    Ports One Type-A Male Connector, One RJ-45 Port
    LEDs Link/Activity

    Cabling
    Type Cat 5 Ethernet Cable

    Dimensions
    7.96” x 1.00” x 0.69” (202.3 x 25.35 x 17.65 mm)

    Weight
    0.8 oz (23 kg)

    Power
    3.3V low power consumption

    Certification
    FCC Class B, CE Class B, UL

    Operating Temp.
    32 to 158°F (0 to 70°C)

    Storage Temp.
    32 to 158°F (0 to 70°C)

    Operating Humidity
    10 to 90% non-condensing

    Storage Humidity
    10 to 90% non-condensing

    Includes: Package Contents

    • One USB Ethernet Adapter
    • One Driver Installation CD
    • One Quick Installation Guide
    • One User Guide included on Installation CD
    • One Acromag Ethernet I/O Instruction Sheet
    • One IP Address Batch Configuration CD
  • Features & Benefits

    • 32 differential current analog inputs
    • 4-way isolation and surge suppression
    • Configurable from any web browser
    • High-resolution 16-bit A/D
    • Fast scanning up to 1KHz
    • Dual-format data registers support both 16-bit signed integers and 32-bit floating point formats
    • User-configurable IEEE-754 32-bit floating point scaling registers on all channels
    • User-configurable integration function on all channels with totalizing 32-bit non-volatile counter registers
    • Built-in precision voltage sources for automatic calibration
    • On-demand self-test for built-in calibration sources
    • Operating temperature: -40 to 70°C (-40 to 158°F)
  • Specs & Data Sheets

  • Software

    AMTN-DEMO (Log in to download the file)
    ATMX Demo Software (Log in to download the file)
    ESW-MBLIB-DEMO (Log in to download the file)
    Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
  • Accessories

    • Compare

      20RM-16-DIN: 19” rack-mount kit with DIN rail

      • 19" rack-mount kit with DIN rail
      $201.25
      Select options
    • Compare

      4001-110: Ethernet Cable

      5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection
      $102.35
      Select options
    • Compare

      5020-350: Toroidal AC Current Sensor

      • AC Current Sensor to precondition an AC current input signal
      • Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
      $51.75
      Select options
    • Compare

      5035 Series: Ethernet Cables

      • Ethernet straight cable, CAT5
      • Ethernet crossover cable, CAT5E
      • Low EMI Double-Shielded Ethernet Patch Cable
      $40.25$126.50
      Read more
    • Compare

      900EN: 5-Port Ethernet Switch

      • 10/100Mbps
      • 15 to 36V DC power supply required
      • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
      $368
      Select options
    • Compare

      AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O

      • Modbus/TCP or Modbus/RTU
      • These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
      • Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
      $287.50$379.50
      Select options
    • Compare

      DIN Rail: Type T

      DIN Rail Strip, Type T
      $11.50$23
      Read more
    • Compare

      EIS-408: Industrial Ethernet Switch with 8 Web-Managed Ports and Redundancy

      • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy
      • 12 to 48V DC power supply required
      • Six copper 10Base-T / 100Base-TX, auto-MDI/MDIX and two fiber optic 100Base-FX, SC connectors
      $1,477.75
      Select options
    • Compare

      ESW-MBLIB: Ethernet Modbus C Library Software

      • Universal support for five operating systems
      • C source code provided
      • Demo program included
      $0$356.50
      Read more
    • Compare

      EtherStax Mounting Kits

      • EtherStax mounting accessories
      $23$109.25
      Read more
    • Compare

      IMC-100A: 10/100BaseTX to 100BaseFX Industrial Media Converter

      • UTP to Fiber Media Converter
      • RJ45 Port Supports Auto MDI/MDI-X Function
      $292.50$357.50
      Read more
    • Compare

      PS5R: Slim Line Power Supplies

      • 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
      • Universal Input (85-264V AC / 100-370V DC)
      • Lightweight and compact size
      $109.25$281.75
      Select options
    • Compare

      Terminal Block Replacements

      • Simplifies wiring connections on Acromag I/O Modules
      • Barrier strip or spring clamp terminal block kits
      • Provide safe and secure wiring connections
      $28.75$40.25
      Select options
    • Compare

      USB-to-Ethernet Adapter

      Simplifies configuration of Acromag Ethernet I/O Modules Prevents disruption of existing LANs This device is a USB-to-Ethernet adapter that you can use to communicate with any Acromag Ethernet I/O product for the purpose of setup and re-configuration for your application. It is recommended for initial communication with Acromag Ethernet devices so that you do not have to disrupt your existing network connection.
      $86.25
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions 12 × 13 × 3 in
    Part Number

    4001-096: USB Ethernet Adapter