Click to zoom
$580$685
Clear
Product short description:
  • 4 or 6-channel DC current or voltage output
  • Ethernet/IP, Modbus TCP/IP, i2o peer-to-peer messaging
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

These modules provide up to six channels of analog output. Multi-range outputs support a wide variety of industrial devices. They can drive displays and recorders, control drives, or send analog signals to other systems. High-resolution, low noise, D/A converters deliver high accuracy and reliability. 3-way isolation further improves system performance.

Output Ranges: Ranges selectable on channel to channel basis.
972EN: DC Current (user-selectable ranges): 0 to 1mA, 0 to 20mA, or 4 to 20mA.
973EN: DC Voltage (user-selectable ranges): 0 to 1V, 0 to 5V, or 0 to 10V DC.

Network Communication: EtherNet/IP or Modbus TCP/IP10/100Mbps with automatic data rate negotiation.

Power Requirement: 15 to 36V DC supply required. 4.6 Watts (972EN) or 2.3 Watts (973EN).

Approvals: CE/ATEX marked. UL, cUL listed, Class I; Div. 2; Groups A, B, C, D. EtherNet/IP, Modbus/TCP conformance tested.

Performance Specifications

Output

Accuracy: Better than ±0.1% of span, typical. 1.6% for 0 to 1mA range. 0.8% for 0 to 1V range.

Digital to Analog Converter (D/A): 12-bit converter.

Current Output Compliance: 12V minimum, 13V typical.

Current Output Load Resistance Range: 0 to 555 ohms, typical.

Voltage Output Source Current: 0 to 10mA DC, maximum.

Environmental

Ambient Operating Temperature:
972EN models -25 to 60°C (-13 to 140°F).
973EN models: -25 to 70°C (-13 to 158°F).

Ambient Storage Temperature: -40 to 85°C (-40 to 185°F).

Relative humidity: 5 to 95%, non-condensing.

Isolation: 1500V AC for 60 seconds or 250V AC continuous. 3-way isolation between I/O, network, and power. Outputs share a common.

Communication

Connector: Shielded RJ-45 sockets, 8-pin, 10BaseT/100BaseTX.

Wiring: Wired MDI. 9xxEN I/O modules do NOT support autocrossover. 900EN switch supports auto-crossover.

Protocol: EtherNet/IP or Modbus TCP/IP with web browser configuration. EtherNet/IP supports PCCC object for communication with legacy PLCs (e.g. SLC505).

IP Address: Default static IP address is 128.1.1.100.

Port:
Ethernet Modbus TCP/IP models (9xxEN-4xxx): Up to 10 Modbus TCP/IP sockets supported.
EtherNet/IP models (9xxEN-6xxx): Up to 10 EtherNet/IP sockets and 1 Modbus TCP/IP socket.

Data Rate: Auto-sensed, 10Mbps or 100Mbps.

Duplex: Auto-negotiated, full or half-duplex.

Compliance: IEEE 802.3, 802.3u, 802.3x, Ethernet II.

Configuration: Web page for configuration and control is built-in with Ethernet access via a standard web browser.

Communication Distance: Distance between network devices is generally limited to 100 meters using recommended cable. Distances may be extended using hubs and switches.

Address: IP address is automatically acquired at startup. Unit may be configured to retrieve this address from the network server using BOOTP (Bootstrap Protocol), or via DHCP (Dynamic Configuration Protocol). A static IP address is also user-programmable. A default toggle switch sets the static IP address to the default factory address of 128.1.1.100 for initial configuration.

Environmental

Isolation: I/O channel, power, and network circuits are isolated from each other for common-mode voltages up to 250VAC, or 354V DC off DC power ground, on a continuous basis (will withstand 1500VAC dielectric strength test for one minute without breakdown). Complies with test requirements of ANSI/ISA-82.01- 1988 for voltage rating specified.

Electromagnetic Compatibility (EMC)

Immunity per European Norm EN50082-1. Emissions per European Norm EN50081-1.

Electrostatic Discharge (ESD) Immunity Per EN61000-4-2.

Radiated Field Immunity (RFI) Per EN61000-4-3 and ENV50204.

Electrical Fast Transient Immunity (EFT) Per EN61000-4-4.

Conducted RF Immunity (CRFI) Per EN61000-4-6.

Surge Immunity Per EN61000-4-5.

Radiated Frequency Emissions Per EN55022 Class B.

  • Configurable from standard web browser
  • 6-output stand-alone module has much lower start-up cost than multi-piece block I/O systems
  • Universal DC outputs support a wide variety of signals and industrial devices
  • Three selectable failsafe modes (0%, last-state, or pre-defined) help prevent unsafe conditions
  • Wide operational temperature range permits installation in extreme environments:
  • 972EN: -25°C to 60°C (-13°F to 140°F)
  • 973EN: -25°C to 70°C (-13°F to 158°F)

Specs & Catalogs

Manuals

972EN-4xxx, 973EN-4xxx User Manual (Log in to download the file)

972EN-6xxx, 973EN-6xxx User Manual (Log in to download the file)

Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
972EN, 973EN: Ethernet Analog Output Modules (Log in to download the file)

Additional information

Weight 10 oz
Dimensions 4.5 × 1.5 × 5 in
Part Number

972EN-4004: Modbus TCP/IP, 4 channel, 972EN-4006: Modbus TCP/IP, 6 channel, 972EN-6004: Ethernet/IP, 4 channel, 972EN-6006, Ethernet/IP, 6 channel, 973EN-4004: Modbus TCP/IP, 4 channel, 973EN-4006: Modbus TCP/IP, 6 channel, 973EN-6004: Ethernet/IP, 4 channel, 973EN-6006: Ethernet/IP, 6 channel

FPGA Type
Logic Cells
Power
Communication

Ethernet/IP, i2o Peer-to-Peer, Modbus TCP/IP

Product Series

BusWorks 900EN Series

Configuration

Built-in Web pages

  • Description

    These modules provide up to six channels of analog output. Multi-range outputs support a wide variety of industrial devices. They can drive displays and recorders, control drives, or send analog signals to other systems. High-resolution, low noise, D/A converters deliver high accuracy and reliability. 3-way isolation further improves system performance.

    Output Ranges: Ranges selectable on channel to channel basis.
    972EN: DC Current (user-selectable ranges): 0 to 1mA, 0 to 20mA, or 4 to 20mA.
    973EN: DC Voltage (user-selectable ranges): 0 to 1V, 0 to 5V, or 0 to 10V DC.

    Network Communication: EtherNet/IP or Modbus TCP/IP10/100Mbps with automatic data rate negotiation.

    Power Requirement: 15 to 36V DC supply required. 4.6 Watts (972EN) or 2.3 Watts (973EN).

    Approvals: CE/ATEX marked. UL, cUL listed, Class I; Div. 2; Groups A, B, C, D. EtherNet/IP, Modbus/TCP conformance tested.

    Performance Specifications

    Output

    Accuracy: Better than ±0.1% of span, typical. 1.6% for 0 to 1mA range. 0.8% for 0 to 1V range.

    Digital to Analog Converter (D/A): 12-bit converter.

    Current Output Compliance: 12V minimum, 13V typical.

    Current Output Load Resistance Range: 0 to 555 ohms, typical.

    Voltage Output Source Current: 0 to 10mA DC, maximum.

    Environmental

    Ambient Operating Temperature:
    972EN models -25 to 60°C (-13 to 140°F).
    973EN models: -25 to 70°C (-13 to 158°F).

    Ambient Storage Temperature: -40 to 85°C (-40 to 185°F).

    Relative humidity: 5 to 95%, non-condensing.

    Isolation: 1500V AC for 60 seconds or 250V AC continuous. 3-way isolation between I/O, network, and power. Outputs share a common.

    Communication

    Connector: Shielded RJ-45 sockets, 8-pin, 10BaseT/100BaseTX.

    Wiring: Wired MDI. 9xxEN I/O modules do NOT support autocrossover. 900EN switch supports auto-crossover.

    Protocol: EtherNet/IP or Modbus TCP/IP with web browser configuration. EtherNet/IP supports PCCC object for communication with legacy PLCs (e.g. SLC505).

    IP Address: Default static IP address is 128.1.1.100.

    Port:
    Ethernet Modbus TCP/IP models (9xxEN-4xxx): Up to 10 Modbus TCP/IP sockets supported.
    EtherNet/IP models (9xxEN-6xxx): Up to 10 EtherNet/IP sockets and 1 Modbus TCP/IP socket.

    Data Rate: Auto-sensed, 10Mbps or 100Mbps.

    Duplex: Auto-negotiated, full or half-duplex.

    Compliance: IEEE 802.3, 802.3u, 802.3x, Ethernet II.

    Configuration: Web page for configuration and control is built-in with Ethernet access via a standard web browser.

    Communication Distance: Distance between network devices is generally limited to 100 meters using recommended cable. Distances may be extended using hubs and switches.

    Address: IP address is automatically acquired at startup. Unit may be configured to retrieve this address from the network server using BOOTP (Bootstrap Protocol), or via DHCP (Dynamic Configuration Protocol). A static IP address is also user-programmable. A default toggle switch sets the static IP address to the default factory address of 128.1.1.100 for initial configuration.

    Environmental

    Isolation: I/O channel, power, and network circuits are isolated from each other for common-mode voltages up to 250VAC, or 354V DC off DC power ground, on a continuous basis (will withstand 1500VAC dielectric strength test for one minute without breakdown). Complies with test requirements of ANSI/ISA-82.01- 1988 for voltage rating specified.

    Electromagnetic Compatibility (EMC)

    Immunity per European Norm EN50082-1. Emissions per European Norm EN50081-1.

    Electrostatic Discharge (ESD) Immunity Per EN61000-4-2.

    Radiated Field Immunity (RFI) Per EN61000-4-3 and ENV50204.

    Electrical Fast Transient Immunity (EFT) Per EN61000-4-4.

    Conducted RF Immunity (CRFI) Per EN61000-4-6.

    Surge Immunity Per EN61000-4-5.

    Radiated Frequency Emissions Per EN55022 Class B.

  • Features & Benefits

    • Configurable from standard web browser
    • 6-output stand-alone module has much lower start-up cost than multi-piece block I/O systems
    • Universal DC outputs support a wide variety of signals and industrial devices
    • Three selectable failsafe modes (0%, last-state, or pre-defined) help prevent unsafe conditions
    • Wide operational temperature range permits installation in extreme environments:
    • 972EN: -25°C to 60°C (-13°F to 140°F)
    • 973EN: -25°C to 70°C (-13°F to 158°F)
  • Specs & Data Sheets

    Specs & Catalogs

    Manuals

    972EN-4xxx, 973EN-4xxx User Manual (Log in to download the file)

    972EN-6xxx, 973EN-6xxx User Manual (Log in to download the file)

  • Software

    Ethernet IP EDS For XTxxx2-000 Modules (Log in to download the file)
    972EN, 973EN: Ethernet Analog Output Modules (Log in to download the file)
  • Additional information

    Additional information

    Weight 10 oz
    Dimensions 4.5 × 1.5 × 5 in
    Part Number

    972EN-4004: Modbus TCP/IP, 4 channel, 972EN-4006: Modbus TCP/IP, 6 channel, 972EN-6004: Ethernet/IP, 4 channel, 972EN-6006, Ethernet/IP, 6 channel, 973EN-4004: Modbus TCP/IP, 4 channel, 973EN-4006: Modbus TCP/IP, 6 channel, 973EN-6004: Ethernet/IP, 4 channel, 973EN-6006: Ethernet/IP, 6 channel

    FPGA Type
    Logic Cells
    Power
    Communication

    Ethernet/IP, i2o Peer-to-Peer, Modbus TCP/IP

    Product Series

    BusWorks 900EN Series

    Configuration

    Built-in Web pages