966PB: 4 or 6-Channel Input Profibus-DP Modules
Please sign in or register to see model options and to add products to your cart.
Product short description:
- RTD or Resistance Signals
- 4 or 6 input channels, Platinum 100 ohm, Nickel 120 ohm, Copper 10 ohm; 0 to 500 ohms resistance
- 12 to 36V DC power
- Profibus-DP, RS-485 network up to 12Mbaud
- Description
- Features & Benefits
- Tech Papers
- Specs & Data Sheets
- Software
- Accessories
- Additional information
Description
These modules provide an isolated Profibus-DP network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. 3-way isolation further improves the system performance.
Input Ranges
RTD (user-selectable type):
2-wire and 3-wire RTDs are supported.
Platinum 100 ohm (alpha = 1.3850 or 1.3911)
Nickel 120 ohm
Copper 10 ohm
Resistance: 0 to 500 ohms
Network Communication: Profibus-DP, RS-485 network up to 12Mbaud
Power Requirement: 12 to 36V DC supply required
Approvals:
Profibus PNO certified
CE marked. UL, cUL listed
Class I; Division 2; Groups A, B, C, D
Performance
Input
Configuration: Input ranges are selectable for a 3-channel group.
Accuracy
Input Type    Input Range       Accuracy (typical)
Pt 100 ohm     -200 to 850°C             ±0.25°C
Ni 120 ohm      -80 to 320°C             ±0.25°C
Cu 10 ohm      -200 to 260°C             ±1.25°C
Resistance        0 to 500 ohms          ±0.05 ohms
RTD Break Detection: Upscale or downscale selection applies to all channels.
Analog to Digital Converter (A/D): 16-bit A/D converter
Noise Rejection:
Normal Mode: Better than 40dB @ 60Hz.
Common Mode: Better than 130dB @ 60Hz.
Input Filter Bandwidth: -3dB at 3Hz, typical
Excitation Current: 1mA DC typical, all RTD types
Environmental
Ambient Temperature:
Operating: -25 to 70°C (-13 to 158°F)
Storage: -40 to 85°C (-40 to 185°F)
Relative Humidity: 5 to 95%, non-condensing
Isolation:
1500V AC for 60 seconds or 250V AC continuous.
3-way isolation between I/O, network, and power.
Inputs share a common.
- Standard Profibus-DP network communication with industry-standard ASIC (Siemens SPC3)
- 6-input stand-alone module has much lower start-up cost than multi-piece block I/O systems
- Versatile RTD or ohmic inputs support a wide variety of industrial sensors and devices
- RTD break detection (upscale or downscale) identifies sensor wiring failures
- High-resolution 16-bit Sigma-Delta A/D converters ensure precise, high accuracy measurements
- Compact packaging with pluggable terminals saves space and simplifies wiring
- Wide operational temperature range permits installation in extreme environments: -25 to 70°C (-13 to 158°F)
-
20RM-16-DIN: 19” rack-mount kit with DIN rail
- 19" rack-mount kit with DIN rail
$200Select options -
4001-095: USB-to-Serial Adapter
- USB-to-serial adapter
- Easy to use to setup and re-configure modules
$75Select options -
5020-350: Toroidal AC Current Sensor
- AC Current Sensor to precondition an AC current input signal
- Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
$50Select options -
PS5R: Slim Line Power Supplies
- 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
- Universal Input (85-264V AC / 100-370V DC)
- Lightweight and compact size
$100 – $255Select options -
Terminal Block Replacements
- Simplifies wiring connections on Acromag I/O Modules
- Barrier strip or spring clamp terminal block kits
- Provide safe and secure wiring connections
$40 – $50Select options
Additional information
| Weight | 10 oz |
|---|---|
| Dimensions | 4.75 × 1.25 × 4.5 in |
| Part Number | 966PB-2004: 4-channel, 966PB-2006: 6-channel |
| Communication | Profibus-DP, RS-485 communication |
| Product Series | BusWorks 900PB Series |
-
Description
Description
These modules provide an isolated Profibus-DP network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. 3-way isolation further improves the system performance.
Input Ranges
RTD (user-selectable type):
2-wire and 3-wire RTDs are supported.
Platinum 100 ohm (alpha = 1.3850 or 1.3911)
Nickel 120 ohm
Copper 10 ohm
Resistance: 0 to 500 ohms
Network Communication: Profibus-DP, RS-485 network up to 12Mbaud
Power Requirement: 12 to 36V DC supply required
Approvals:
Profibus PNO certified
CE marked. UL, cUL listed
Class I; Division 2; Groups A, B, C, DPerformance
Input
Configuration: Input ranges are selectable for a 3-channel group.
Accuracy
Input Type    Input Range       Accuracy (typical)
Pt 100 ohm     -200 to 850°C             ±0.25°C
Ni 120 ohm      -80 to 320°C             ±0.25°C
Cu 10 ohm      -200 to 260°C             ±1.25°C
Resistance        0 to 500 ohms          ±0.05 ohmsRTD Break Detection: Upscale or downscale selection applies to all channels.
Analog to Digital Converter (A/D): 16-bit A/D converterNoise Rejection:
Normal Mode: Better than 40dB @ 60Hz.
Common Mode: Better than 130dB @ 60Hz.
Input Filter Bandwidth: -3dB at 3Hz, typical
Excitation Current: 1mA DC typical, all RTD typesEnvironmental
Ambient Temperature:
Operating: -25 to 70°C (-13 to 158°F)
Storage: -40 to 85°C (-40 to 185°F)
Relative Humidity: 5 to 95%, non-condensing
Isolation:
1500V AC for 60 seconds or 250V AC continuous.
3-way isolation between I/O, network, and power.
Inputs share a common. -
Features & Benefits
- Standard Profibus-DP network communication with industry-standard ASIC (Siemens SPC3)
- 6-input stand-alone module has much lower start-up cost than multi-piece block I/O systems
- Versatile RTD or ohmic inputs support a wide variety of industrial sensors and devices
- RTD break detection (upscale or downscale) identifies sensor wiring failures
- High-resolution 16-bit Sigma-Delta A/D converters ensure precise, high accuracy measurements
- Compact packaging with pluggable terminals saves space and simplifies wiring
- Wide operational temperature range permits installation in extreme environments: -25 to 70°C (-13 to 158°F)
-
Tech Papers
Profibus DP an Introduction White Paper (Log in to view the file)Introduction to Profibus DP The following information describes the operation of Profibus DP as it relates to Acromag Series 900PB DP slave I/O modules. Acromag manufactures a line of I/O modules that support Profibus DP over RS485.How to Monitor Stator Temperatures with Remote Profibus I/O App NoteMonitoring Stator Temperatures with Remote Profibus I/O Defining the Problem: A Power Plant has Hydroelectric Generators with 10 ohm copper 3 wire RTDs embedded in the stator motor windings. The RTDs are far away from a PLC in the control room. The long distance is picking up noise that is interfering with their measurements. System... -
Specs & Data Sheets
-
Software
Profibus-DP GSD Files (Log in to download the file) -
Accessories
-
20RM-16-DIN: 19” rack-mount kit with DIN rail
- 19" rack-mount kit with DIN rail
$200Select options -
4001-095: USB-to-Serial Adapter
- USB-to-serial adapter
- Easy to use to setup and re-configure modules
$75Select options -
5020-350: Toroidal AC Current Sensor
- AC Current Sensor to precondition an AC current input signal
- Highly accurate toroidal instrument transformer that converts an AC current signal to a safe, low level, DC milliampere signal (0 to 11.17mA).
$50Select options -
PS5R: Slim Line Power Supplies
- 10W, 15W, 30W, 60W, 90W, 120W, and 240W models
- Universal Input (85-264V AC / 100-370V DC)
- Lightweight and compact size
$100 – $255Select options -
Terminal Block Replacements
- Simplifies wiring connections on Acromag I/O Modules
- Barrier strip or spring clamp terminal block kits
- Provide safe and secure wiring connections
$40 – $50Select options
-
-
Additional information
Additional information
Weight 10 oz Dimensions 4.75 × 1.25 × 4.5 in Part Number 966PB-2004: 4-channel, 966PB-2006: 6-channel
Communication Profibus-DP, RS-485 communication
Product Series BusWorks 900PB Series
Please login to submit this form.