Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • 5030-902: IntelliPack Cable
  • 5030-913: IntelliPack Serial Port Adapter

5030 Cable Series Description

5030-902: IntelliPack Cable
This 6-wire cable is used to connect the SPI port of the IntelliPack Serial Port Adapter to the IntelliPack. This cable carries the SPI data and clock signals, reset signal, and +5V power and ground signals. The cable is 7 feet long and has a 6-wire RJ11 plug at both ends which snap into jacks on the Serial Port Adapter and the IntelliPack module.

5030-913: IntelliPack Serial Port Adapter
This adapter serves as an isolated interface converter between the EIA232 serial port of the host computer and the Serial Peripheral Interface (SPI) port of the IntelliPack module. It is used in conjunction with the Acromag IntelliPack Configuration Software to program and configure the modules. This adapter
requires no user adjustment, no external power, and operates transparent to the user. It receives its power from the IntelliPack module. The adapter has a DB9S connector that mates to the common DB9P serial port connector of a host computer. The adapter also has a 6-wire RJ11 phone jack to connect to the
IntelliPack alarm module via a separate interconnecting cable.

Additional information

Weight 16 oz
Dimensions 8 × 5 × 2 in
Part Number

5030-902: RJ11 plug at each end, 5030-913: DB9S connector to RJ11 jack

Product Series

IntelliPack 800 Series

  • Description

    5030 Cable Series Description

    5030-902: IntelliPack Cable
    This 6-wire cable is used to connect the SPI port of the IntelliPack Serial Port Adapter to the IntelliPack. This cable carries the SPI data and clock signals, reset signal, and +5V power and ground signals. The cable is 7 feet long and has a 6-wire RJ11 plug at both ends which snap into jacks on the Serial Port Adapter and the IntelliPack module.

    5030-913: IntelliPack Serial Port Adapter
    This adapter serves as an isolated interface converter between the EIA232 serial port of the host computer and the Serial Peripheral Interface (SPI) port of the IntelliPack module. It is used in conjunction with the Acromag IntelliPack Configuration Software to program and configure the modules. This adapter
    requires no user adjustment, no external power, and operates transparent to the user. It receives its power from the IntelliPack module. The adapter has a DB9S connector that mates to the common DB9P serial port connector of a host computer. The adapter also has a 6-wire RJ11 phone jack to connect to the
    IntelliPack alarm module via a separate interconnecting cable.

  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 8 × 5 × 2 in
    Part Number

    5030-902: RJ11 plug at each end, 5030-913: DB9S connector to RJ11 jack

    Product Series

    IntelliPack 800 Series