Click to zoom
$1,300
Clear
Product short description:
  • Dual XAUI ports
  • Intel®  XL710 controller
  • PCIe Gen 3 x8 interface
  • Conduction-cooled
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Acromag’s XMC632 module provides up to two 10-GbE XAUI interface ports. Different models are available for VITA 42/61 connector options to support a PCIe Gen 3 interface. The rugged, rear I/O design is ready for use in conduction-cooled systems for extreme temperature environments.

Intel’s XL710 quad-port 10-gigabit Ethernet controller delivers high-performance and offers many powerful networking capabilities. Advanced virtualization, intelligent offload and accelerator technologies optimize network performance.

Combining the intelligent off-loading features of the XL710 controller with the processing power of a Xeon-D processor can deliver outstanding performance levels. Together, the two Intel devices provide a balanced hybrid solution of compute and off-load to achieve optimal performance and efficiency in an embedded system.

Designed for COTS applications, these rugged XMC mezzanine modules offer a high-density, high-performance solution for network interface applications. They are ideal for use in defense, aerospace, industrial, and scientific research computing systems.

Performance Specifications

Communication

Ethernet Controller: Intel® XL710
Network Interface: Four XAUI 10-Gigabit Ethernet interfaces.
Complies with IEEE 802.3-2008 standard for Ethernet.
Complies with IEEE 802.3ae-2002 amendment for 10 Gb/s Ethernet.
Throughput: 10,000 MB/s (10GB/s) per port, full-duplex.
Total aggregate rate limited by PCIe host interface.

XMC Host Interface

XMC Compliance
Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.
Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.
Complies with ANSI/VITA 42.6 specification for XMC 10 Gigabit Ethernet 4-Lane Protocol Layer Standard.

PCI Express

Conforms to PCI Express Base Specification, Rev. 3.1.
PCIe 8-lane (x8) Gen 3 interface operates at a bus speed of 8 Gbps per lane per direction.
Gen 3 PCIe interface requires VITA 61 connectors.
Gen 2 PCIe interface supported w/ VITA 42 connectors

Electrial / Mechanical

XMC Connectors: P15 for PCIe bus via eight high-speed serial lanes. P16 for two 10GbE XAUI interfaces. Available as VITA 42 standard or VITA 61 upgrade for PCIe Gen 3 applications.
Power Requirement:  3.3V: 220mA idle, 220mA active, 330mA max. 5.5V: 450mA idle, 500mA active, 1025mA max. 12V: 215mA idle, 235mA active, 455mA max.
Power: 2.8W idle, 3.1W active, 5.7W max.
Dimensions: Single-width XMC. 149 x 74 x 10 mm.
Unit weight: 76.9 g.

Environmental

Operating Temperature Range: -40 to 85°C (conduction-cooled).
Storage: -55 to 125°C.
Relative Humidity: 5 to 95% non-condensing.
Shock: Designed to comply with VITA 47 Class OS1.
Vibration: Designed to comply with VITA 47 Class V1.
Certifications: CE compliant.

Software Support

Linux® and Windows® Systems Intel XL710 Ethernet Controller drivers available at www.intel.com.

  • Industry-leading Intel XL710 controller with four independent 10-GbE interfaces
  • Two XAUI interfaces available as rear I/O via the P16 connector
  • PCIe x8 Gen 3 interface
  • IEEE 1588 and 802.1AS precision timing
  • IEEE 802.3az Energy Efficient Ethernet (EEE)
  • Advanced traffic steering capability increases transaction rates and reduces latency
  • VMDq for emulated path
  • Dynamic load balancing
  • Flexible port partitioning (PCI-SIG SR-IOV)
  • Tx/Rx IP, TCP/UDP/SCTP, IPv4/IPv6 checksum offloads lower processor usage
  • Jumbo frame packet support up to 9.5KB
  • Up to -40 to 85°C operation
  • Linux® and Windows® support
  • CE compliant.

Manuals

XMC631/XMC632 User Manual (Log in to download the file)

Drawings & Diagrams

Additional information

Weight 3 oz
Dimensions 6 × 3 × 1 in
Part Number

XMC632-42-50: VITA 42, XMC632-61-50: VITA 61

Product Series

XMC630 Series

  • Description

    Acromag’s XMC632 module provides up to two 10-GbE XAUI interface ports. Different models are available for VITA 42/61 connector options to support a PCIe Gen 3 interface. The rugged, rear I/O design is ready for use in conduction-cooled systems for extreme temperature environments.

    Intel’s XL710 quad-port 10-gigabit Ethernet controller delivers high-performance and offers many powerful networking capabilities. Advanced virtualization, intelligent offload and accelerator technologies optimize network performance.

    Combining the intelligent off-loading features of the XL710 controller with the processing power of a Xeon-D processor can deliver outstanding performance levels. Together, the two Intel devices provide a balanced hybrid solution of compute and off-load to achieve optimal performance and efficiency in an embedded system.

    Designed for COTS applications, these rugged XMC mezzanine modules offer a high-density, high-performance solution for network interface applications. They are ideal for use in defense, aerospace, industrial, and scientific research computing systems.

    Performance Specifications

    Communication

    Ethernet Controller: Intel® XL710
    Network Interface: Four XAUI 10-Gigabit Ethernet interfaces.
    Complies with IEEE 802.3-2008 standard for Ethernet.
    Complies with IEEE 802.3ae-2002 amendment for 10 Gb/s Ethernet.
    Throughput: 10,000 MB/s (10GB/s) per port, full-duplex.
    Total aggregate rate limited by PCIe host interface.

    XMC Host Interface

    XMC Compliance
    Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.
    Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.
    Complies with ANSI/VITA 42.6 specification for XMC 10 Gigabit Ethernet 4-Lane Protocol Layer Standard.

    PCI Express

    Conforms to PCI Express Base Specification, Rev. 3.1.
    PCIe 8-lane (x8) Gen 3 interface operates at a bus speed of 8 Gbps per lane per direction.
    Gen 3 PCIe interface requires VITA 61 connectors.
    Gen 2 PCIe interface supported w/ VITA 42 connectors

    Electrial / Mechanical

    XMC Connectors: P15 for PCIe bus via eight high-speed serial lanes. P16 for two 10GbE XAUI interfaces. Available as VITA 42 standard or VITA 61 upgrade for PCIe Gen 3 applications.
    Power Requirement:  3.3V: 220mA idle, 220mA active, 330mA max. 5.5V: 450mA idle, 500mA active, 1025mA max. 12V: 215mA idle, 235mA active, 455mA max.
    Power: 2.8W idle, 3.1W active, 5.7W max.
    Dimensions: Single-width XMC. 149 x 74 x 10 mm.
    Unit weight: 76.9 g.

    Environmental

    Operating Temperature Range: -40 to 85°C (conduction-cooled).
    Storage: -55 to 125°C.
    Relative Humidity: 5 to 95% non-condensing.
    Shock: Designed to comply with VITA 47 Class OS1.
    Vibration: Designed to comply with VITA 47 Class V1.
    Certifications: CE compliant.

    Software Support

    Linux® and Windows® Systems Intel XL710 Ethernet Controller drivers available at www.intel.com.

  • Features & Benefits

    • Industry-leading Intel XL710 controller with four independent 10-GbE interfaces
    • Two XAUI interfaces available as rear I/O via the P16 connector
    • PCIe x8 Gen 3 interface
    • IEEE 1588 and 802.1AS precision timing
    • IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Advanced traffic steering capability increases transaction rates and reduces latency
    • VMDq for emulated path
    • Dynamic load balancing
    • Flexible port partitioning (PCI-SIG SR-IOV)
    • Tx/Rx IP, TCP/UDP/SCTP, IPv4/IPv6 checksum offloads lower processor usage
    • Jumbo frame packet support up to 9.5KB
    • Up to -40 to 85°C operation
    • Linux® and Windows® support
    • CE compliant.
  • Specs & Data Sheets

    Manuals

    XMC631/XMC632 User Manual (Log in to download the file)

    Drawings & Diagrams

  • Additional information

    Additional information

    Weight 3 oz
    Dimensions 6 × 3 × 1 in
    Part Number

    XMC632-42-50: VITA 42, XMC632-61-50: VITA 61

    Product Series

    XMC630 Series