XMC730 Multi-Function I/O
Product short description:
- Analog input
- Analog output
- Digital I/O
- Counter/timers
- Conduction-cooled options
High-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Click here to watch a short video highlighting the features of the Acromag XMC730.
XMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Now you can conserve your precious XMC slots and still get all the I/O functionality you need. The XMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the XMC730 is still very budget-friendly. A conduction-cooled version is also available.
Performance Specifications
Analog Input
Input channels: 16 differential, voltage (non-isolated).
Resolution: 16 bits.
Conversion rate: 791,139.24Hz maximum.
Settling time: Full-scale step 420 ns to 0.005% of FSR.
Input ranges (Software-selectable on a per channel basis): Bipolar: ±10.24V, ±10.0V ±5.12V, ±5.0V. Unipolar: 0 to 10.24V, 0 to 10.0V, 0 to 5.12V.
Calibrated error: ±3.125 LSB max. (0 to 5.12V). ±2.125 LSB max. (all other ranges).
Analog Output
Output channels: 8 single-ended voltage (non-isolated).
Resolution: 16 bits.
Settling Time: 12.5 µs 20 V step to 1 LSB maximum. 8.5 µs 10 V step to 1 LSB maximum. 7.5 µs typical.
Output ranges (software-selectable): Bipolar: ±10V, ±5V, ±3V, -2.5 to +7.5V. Unipolar: 0 to 10V, 0 to 5V.
Output current: ± 10mA maximum (minimum load resistance of 1KΩ with a 10V output).
Calibrated error: ±2.125 LSB (±0.0032% FSR) max.
Digital I/O
Input/output range: 0 to 5V.
Signal thresholds:
VIH: 2.0V minimum.
VIL: 0.8V maximum.
IOH: ─24 mA maximum.
IOL: 24mA maximum.
VOH: 3.7V minimum VCCA.
VOL: 0.55V maximum VCCA.
Minimum pulse: 32nS.
Debounce: Filters signals with duration <2.4 µs.
Counter/Timer
Configuration: 32-bit timer.
Counter input: TTL input port.
Counter output: MOSFET output port.
Counter output pull-up voltage: +5V or 12V with 1K pull-up, set by DIP switch.
Internal clock: 62.5MHz, 15.625MHz, 7.8125MHz, 3.90625MHz, 1.953125MHz.
XMC Compliance
Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.
Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.
Electrical/mechanical interface: Single-Width Module.
PCIe Compliance
Conforms to PCI Express Base Specification, Revision 2.1.
Gen1 PCIe interface.
BAR0 memory size: 1M Byte.
Environmental
Operating temperature: XMC730: 0 to 70°C (200 LFM airflow). XMC730E: -40 to 85°C (200 LFM airflow). XMC730CC: -40 to 85°C (cold plate).
Storage temperature: -55 to 100°C.
Relative humidity: 5 to 95% non-condensing.
Shock, operating: Designed to comply with VITA 47 Class OS1.
Vibration, random operating: Designed to comply with VITA 47 Class V1.
Power: 3.3V ±5%: 0.567A typical, 0.7A maximum. VPWR ±5%: 0.10A typical, 0.11A maximum. +12V ±5%: 0.03A typical, 0.0374 maximum.
Analog Inputs
- 16 differential (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
- 16-bit ADC with integral sample-and-hold and reference
- 1.264ÎĽS conversion time (791KHz rate)
- 1026 sample FIFO buffer
- Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
- User-programmable channel conversion sequence and timing
- External trigger input or output
- Factory calibration constants stored in on-board flash memory for error correction
Analog Outputs
- Eight analog output channels (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
- Individual 16-bit DACs per channel with 7.5ÎĽS settling time
- Flexible operating mode, trigger, and memory allocation
- Configurable for direct access, single burst, continuous, or streaming (FIFO) output
- Reliable software calibration with coefficients stored on-board
- FIFO for waveform generation
- Interrupt on user-programmable FIFO threshold
- Shared 64K x 16-bit sample memory
Digital I/O
- 16 bidirectional input/output channels (direction configured in 8-channel groups)
- TTL-compatible thresholds
- Programmable change-of-state/level interrupts
- Failsafe power-up and system reset
Counter/Timers
- Multi-function 32-bit counter/timer
- Quadrature Position measurement
- Pulse Width modulation
- Watchdog timer
- Event counter
- Frequency measurement
- Pulse-width or period measurement
- One-shot and repetitive one-shot pulse waveform generation
- Programmable interface polarity
- Internal or external triggering
- CMOS compatible thresholds
General
- DMA transfer support to move data between module memory and PCIe bus
- Software development tools for VxWorks®, Linux®, and Windows® environments
Specs & Catalogs
Manuals
XMC730 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
PMCSW-API-VXW: VxWorks Libraries
- VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
- Supports any CPU target with quick modification.
- API easily convertible for any operating system
$965Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
Additional information
Weight | N/A |
---|---|
Dimensions | 7 × 4 × 1 in |
Part Number | XMC730: Front I/O 68-pin SCSI-2 connector., XMC730E: Front I/O 68-pin SCSI-2 connector, extended temperature., XMC730CC: Rear P16 and P4 connectors, conduction-cooled. |
-
Description
XMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Now you can conserve your precious XMC slots and still get all the I/O functionality you need. The XMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the XMC730 is still very budget-friendly. A conduction-cooled version is also available.
Performance Specifications
Analog Input
Input channels: 16 differential, voltage (non-isolated).
Resolution: 16 bits.
Conversion rate: 791,139.24Hz maximum.
Settling time: Full-scale step 420 ns to 0.005% of FSR.
Input ranges (Software-selectable on a per channel basis): Bipolar: ±10.24V, ±10.0V ±5.12V, ±5.0V. Unipolar: 0 to 10.24V, 0 to 10.0V, 0 to 5.12V.
Calibrated error: ±3.125 LSB max. (0 to 5.12V). ±2.125 LSB max. (all other ranges).Analog Output
Output channels: 8 single-ended voltage (non-isolated).
Resolution: 16 bits.
Settling Time: 12.5 µs 20 V step to 1 LSB maximum. 8.5 µs 10 V step to 1 LSB maximum. 7.5 µs typical.
Output ranges (software-selectable): Bipolar: ±10V, ±5V, ±3V, -2.5 to +7.5V. Unipolar: 0 to 10V, 0 to 5V.
Output current: ± 10mA maximum (minimum load resistance of 1KΩ with a 10V output).
Calibrated error: ±2.125 LSB (±0.0032% FSR) max.Digital I/O
Input/output range: 0 to 5V.
Signal thresholds:
VIH: 2.0V minimum.
VIL: 0.8V maximum.
IOH: ─24 mA maximum.
IOL: 24mA maximum.
VOH: 3.7V minimum VCCA.
VOL: 0.55V maximum VCCA.
Minimum pulse: 32nS.
Debounce: Filters signals with duration <2.4 µs.Counter/Timer
Configuration: 32-bit timer.
Counter input: TTL input port.
Counter output: MOSFET output port.
Counter output pull-up voltage: +5V or 12V with 1K pull-up, set by DIP switch.
Internal clock: 62.5MHz, 15.625MHz, 7.8125MHz, 3.90625MHz, 1.953125MHz.XMC Compliance
Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.
Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.
Electrical/mechanical interface: Single-Width Module.PCIe Compliance
Conforms to PCI Express Base Specification, Revision 2.1.
Gen1 PCIe interface.
BAR0 memory size: 1M Byte.Environmental
Operating temperature: XMC730: 0 to 70°C (200 LFM airflow). XMC730E: -40 to 85°C (200 LFM airflow). XMC730CC: -40 to 85°C (cold plate).
Storage temperature: -55 to 100°C.
Relative humidity: 5 to 95% non-condensing.
Shock, operating: Designed to comply with VITA 47 Class OS1.
Vibration, random operating: Designed to comply with VITA 47 Class V1.
Power: 3.3V ±5%: 0.567A typical, 0.7A maximum. VPWR ±5%: 0.10A typical, 0.11A maximum. +12V ±5%: 0.03A typical, 0.0374 maximum. -
Features & Benefits
Analog Inputs
- 16 differential (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
- 16-bit ADC with integral sample-and-hold and reference
- 1.264ÎĽS conversion time (791KHz rate)
- 1026 sample FIFO buffer
- Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
- User-programmable channel conversion sequence and timing
- External trigger input or output
- Factory calibration constants stored in on-board flash memory for error correction
Analog Outputs
- Eight analog output channels (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
- Individual 16-bit DACs per channel with 7.5ÎĽS settling time
- Flexible operating mode, trigger, and memory allocation
- Configurable for direct access, single burst, continuous, or streaming (FIFO) output
- Reliable software calibration with coefficients stored on-board
- FIFO for waveform generation
- Interrupt on user-programmable FIFO threshold
- Shared 64K x 16-bit sample memory
Digital I/O
- 16 bidirectional input/output channels (direction configured in 8-channel groups)
- TTL-compatible thresholds
- Programmable change-of-state/level interrupts
- Failsafe power-up and system reset
Counter/Timers
- Multi-function 32-bit counter/timer
- Quadrature Position measurement
- Pulse Width modulation
- Watchdog timer
- Event counter
- Frequency measurement
- Pulse-width or period measurement
- One-shot and repetitive one-shot pulse waveform generation
- Programmable interface polarity
- Internal or external triggering
- CMOS compatible thresholds
General
- DMA transfer support to move data between module memory and PCIe bus
- Software development tools for VxWorks®, Linux®, and Windows® environments
-
Specs & Data Sheets
Specs & Catalogs
Manuals
XMC730 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
PCISW-API-LNX (Log in to download the file) -
Accessories
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options -
PMCSW-API-VXW: VxWorks Libraries
- VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
- Supports any CPU target with quick modification.
- API easily convertible for any operating system
$965Select options -
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
$165 – $225Select options
-
-
Additional information
Additional information
Weight N/A Dimensions 7 × 4 × 1 in Part Number XMC730: Front I/O 68-pin SCSI-2 connector., XMC730E: Front I/O 68-pin SCSI-2 connector, extended temperature., XMC730CC: Rear P16 and P4 connectors, conduction-cooled.
Please login to submit this form.