Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • XMC module
  • Kintex-7 FPGA
  • 10-Gigabit Ethernet
  • Write-protected flash

Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.

XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Description

Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. For security, the FPGA’s configuration flash is write-protected.

Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.

Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.

The rear I/O provides 4-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).

With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable
logic with the flexibility of software running on MicroBlaze™ soft processors.

Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly.
A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE®
Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

Performance Specifications

FPGA

FPGA device: Xilinx Kintex-7 FPGA. Model XC7K325T FPGA with 326,080 logic cells and 840 DSP48E1 slices or Model XC7K410T with 406,720 logic cells and 1540 DSP48E1 slices.

FPGA configuration: Download via JTAG or flash memory. Installation of 2mm pitch jumper shunt required for writing to flash memory.

Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller. See EDK kit.

I/O Processing

Front high-speed I/O:  Two x1 lanes via SFP+ connectors for Gigabit Ethernet and Fibre Channel interface.

Front user I/O: 36-pin connector provides JTAG connection, USB signals, 2 global differential clock pairs, 11 LVDS signal pairs, and 2 ground signals.

Rear high-speed I/O: 12 high-speed serial lanes. x8 lanes via P15 and x4 lanes via P16.

Rear user I/O: P16: 17 LVDS pairs (34 LVCMOS), 2 global clock pairs. P4: 30 LVDS pairs (60 LVCMOS), 2 global clock pairs.

Engineering Design Kit

Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a XMC-7K module (click here for more information).

XMC Compliance

Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.

Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.

Electrical/Mechanical Interface: Single-Width Module.

Electrical

XMC PCIe bus interface (P15 and P16): One 114-pin male connector (Samtec ASP-103614-05 or equivalent).
P15 primary XMC connector: 8 differential pairs (PCIe standard, Serial RapidIO, 10-Gigabit Ethernet, or Xilinx Aurora). JTAG.
System Management (XMC provides hardware definition information read by an external controller using IPMI commands and I2C serial bus transactions.)
3.3V power: 4 pins at 1A/pin. 3.3V auxiliary power: 1 pin for system management. Variable power (5V or 12V): 8 pins at 1A per pin.

P16 XMC connector: 4 differential pairs (PCIe, Serial RapidIO, or Xilinx Aurora). 17 LVDS pairs or 34 SelectI/O signals (differential pairs grouped per VITA 46.0 X38s). 2 global clock pairs. Vcco pins are powered by 2.5V and support the 2.5V I/O standards.

P4 PMC rear I/O connector: 64-pin female receptacle header (AMP 120527-1 or equivalent). 64 I/O connections (30 LVDS pairs plus two global clocks). Vcco pins powered by 2.5V and support the 2.5V I/O standards.

VHDCR connector: 36-position connector (Samtec VHDCR-36-01-M-RA) mates with industry-standard VHDCI cable assemblies.

SFP+ host connector: SFP transceiver signals route directly to Kintex-7 FPGA. 10.3125Gb/S maximum data rate. SFP+ copper (Gigabit Ethernet) or fibre optic modules available from Acromag.

JTAG voltage level: 2.5V default. Resistor stuff option for 3.3V (consult factory).

Environmental

Operating temperature: XMC-7KWP-325F: -40 to 55°C.  XMC-7KWP-410F: -40 to 55°C.

Storage temperature: -55 to 125°C.

Relative humidity: 5 to 95% non-condensing.

Power: 3.3V (±5%): 7.8W typical. 12V (±5%): 2.7W typical. 3.3V AUX (±5%): 57μW typical.

MTBF: Contact the factory.

  • Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
  • 128M x 64-bit DDR3 SDRAM
  • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
  • FPGA bitstream storage flash write-protected unless access jumper installed
  • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
  • 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
  • Dual SFP+ ports for Fibre Channel or 10GbE
  • 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
  • 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
  • 22 SelectIO, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
  • DMA support provides data transfer between system memory and the on-board memory
  • Support for Xilinx ChipScope™ Pro interface
PCISW-API-LNX (Log in to download the file)
  • Compare

    5028 SFP Transceivers

    Select options
  • Compare

    Embedded Cables

    Select options
  • Compare

    PCISW-API-LNX: Linux Libraries (download only)

    • Application programming interface with function routines
    • For XMC, CompactPCI, PCI, and PMC modules
    • Includes C source code
    • Download at no charge
    Read more
  • Compare

    PCISW-API-WIN

    • Support for Acromag XMC, PMC, PCI, CompactPCI cards
    Select options
  • Compare

    PMCSW-API-VXW: VxWorks Libraries

    • VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
    • Supports any CPU target with quick modification.
    • API easily convertible for any operating system
    Select options
  • Compare

    XMC-7KA-EDK: Engineering Design Kit

    Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
    Select options

Additional information

Weight 8 oz
Dimensions 7 × 4 × 1 in
Part Number:

XMC-7KWP-325F: 325k logic cells, XMC-7KWP-410F: 410k logic cells

Product Series

Kintex-7 Series

Logic Cells

326k, 406k

FPGA Type

Xilinx Kintex-7

  • Description

    XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports Description

    Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

    The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing. For security, the FPGA’s configuration flash is write-protected.

    Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.

    Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.

    The rear I/O provides 4-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).

    With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

    These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable
    logic with the flexibility of software running on MicroBlaze™ soft processors.

    Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly.
    A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE®
    Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

    Performance Specifications

    FPGA

    FPGA device: Xilinx Kintex-7 FPGA. Model XC7K325T FPGA with 326,080 logic cells and 840 DSP48E1 slices or Model XC7K410T with 406,720 logic cells and 1540 DSP48E1 slices.

    FPGA configuration: Download via JTAG or flash memory. Installation of 2mm pitch jumper shunt required for writing to flash memory.

    Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller. See EDK kit.

    I/O Processing

    Front high-speed I/O:  Two x1 lanes via SFP+ connectors for Gigabit Ethernet and Fibre Channel interface.

    Front user I/O: 36-pin connector provides JTAG connection, USB signals, 2 global differential clock pairs, 11 LVDS signal pairs, and 2 ground signals.

    Rear high-speed I/O: 12 high-speed serial lanes. x8 lanes via P15 and x4 lanes via P16.

    Rear user I/O: P16: 17 LVDS pairs (34 LVCMOS), 2 global clock pairs. P4: 30 LVDS pairs (60 LVCMOS), 2 global clock pairs.

    Engineering Design Kit

    Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a XMC-7K module (click here for more information).

    XMC Compliance

    Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors.

    Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface.

    Electrical/Mechanical Interface: Single-Width Module.

    Electrical

    XMC PCIe bus interface (P15 and P16): One 114-pin male connector (Samtec ASP-103614-05 or equivalent).
    P15 primary XMC connector: 8 differential pairs (PCIe standard, Serial RapidIO, 10-Gigabit Ethernet, or Xilinx Aurora). JTAG.
    System Management (XMC provides hardware definition information read by an external controller using IPMI commands and I2C serial bus transactions.)
    3.3V power: 4 pins at 1A/pin. 3.3V auxiliary power: 1 pin for system management. Variable power (5V or 12V): 8 pins at 1A per pin.

    P16 XMC connector: 4 differential pairs (PCIe, Serial RapidIO, or Xilinx Aurora). 17 LVDS pairs or 34 SelectI/O signals (differential pairs grouped per VITA 46.0 X38s). 2 global clock pairs. Vcco pins are powered by 2.5V and support the 2.5V I/O standards.

    P4 PMC rear I/O connector: 64-pin female receptacle header (AMP 120527-1 or equivalent). 64 I/O connections (30 LVDS pairs plus two global clocks). Vcco pins powered by 2.5V and support the 2.5V I/O standards.

    VHDCR connector: 36-position connector (Samtec VHDCR-36-01-M-RA) mates with industry-standard VHDCI cable assemblies.

    SFP+ host connector: SFP transceiver signals route directly to Kintex-7 FPGA. 10.3125Gb/S maximum data rate. SFP+ copper (Gigabit Ethernet) or fibre optic modules available from Acromag.

    JTAG voltage level: 2.5V default. Resistor stuff option for 3.3V (consult factory).

    Environmental

    Operating temperature: XMC-7KWP-325F: -40 to 55°C.  XMC-7KWP-410F: -40 to 55°C.

    Storage temperature: -55 to 125°C.

    Relative humidity: 5 to 95% non-condensing.

    Power: 3.3V (±5%): 7.8W typical. 12V (±5%): 2.7W typical. 3.3V AUX (±5%): 57μW typical.

    MTBF: Contact the factory.

  • Features & Benefits

    • Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
    • 128M x 64-bit DDR3 SDRAM
    • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
    • FPGA bitstream storage flash write-protected unless access jumper installed
    • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
    • 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
    • Dual SFP+ ports for Fibre Channel or 10GbE
    • 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
    • 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
    • 22 SelectIO, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
    • DMA support provides data transfer between system memory and the on-board memory
    • Support for Xilinx ChipScope™ Pro interface
  • Specs & Data Sheets

  • Software

    PCISW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      5028 SFP Transceivers

      Select options
    • Compare

      Embedded Cables

      Select options
    • Compare

      PCISW-API-LNX: Linux Libraries (download only)

      • Application programming interface with function routines
      • For XMC, CompactPCI, PCI, and PMC modules
      • Includes C source code
      • Download at no charge
      Read more
    • Compare

      PCISW-API-WIN

      • Support for Acromag XMC, PMC, PCI, CompactPCI cards
      Select options
    • Compare

      PMCSW-API-VXW: VxWorks Libraries

      • VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
      • Supports any CPU target with quick modification.
      • API easily convertible for any operating system
      Select options
    • Compare

      XMC-7KA-EDK: Engineering Design Kit

      Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
      Select options
  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 7 × 4 × 1 in
    Part Number:

    XMC-7KWP-325F: 325k logic cells, XMC-7KWP-410F: 410k logic cells

    Product Series

    Kintex-7 Series

    Logic Cells

    326k, 406k

    FPGA Type

    Xilinx Kintex-7