Click to zoom
$4,895$6,630
Clear
Product short description:
  • Logic-optimized Kintex-7 FPGA
  • XMC module with PCIe interface
  • Conduction-Cooled

 

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. Select I/O signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)

Two versions of the Kintex-7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.

With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.

Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces

Performance Specifications

FPGA

FPGA device: Xilinx Kintex-7 FPGA.

Model XC7K325T FPGA with 326,080 logic cells and 840 DSP48E1 slices or Model XC7K410T with 406,720 logic cells and 1540 DSP48E1 slices.

FPGA configuration: Download via JTAG or flash memory.

Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller.  See EDK kit.

I/O Processing

Rear high-speed I/O: 16 high-speed serial lanes. x8 lanes via P15 and x8 lanes via P16.

Rear user I/O: P16: 17 LVDS pairs (34 LVCMOS), 2 global clock pairs. P4: 30 LVDS pairs (60 LVCMOS), 2 global clock pairs.

Engineering Design Kit

Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a XMC-7K module (see www.acromag.com for more information).

XMC Compliance

Complies with ANSI/VITA 42.0 specification for XMC module mechanicals and connectors. Complies with ANSI/VITA 42.3 specification for XMC modules with PCI Express interface. Electrical/Mechanical Interface: Single-Width Module.

Electrical

XMC PCIe bus interface (P15 and P16): One 114-pin male connector (Samtec ASP-103614-05 or equivalent).

P15 primary XMC connector: 8 differential pairs (PCIe standard, Serial RapidIO, 10-Gigabit Ethernet, or Xilinx Aurora). JTAG.

System Management (XMC provides hardware definition information read by an external controller using IPMI commands and I2C serial bus transactions.):

3.3V power: 4 pins at 1A/pin. 3.3V auxiliary power: 1 pin, powers volatile memory to store the bitstream encryption key. Variable power (5V or 12V): 8 pins at 1A per pin.

P16 XMC connector: 4 differential pairs (PCIe, Serial RapidIO, or Xilinx Aurora). 17 LVDS pairs or 34 SelectI/O signals (differential pairs grouped per VITA 46.0 X38s). 2 global clock pairs. Vcco pins are powered by 2.5V and support the 2.5V I/O standards.

P4 PMC rear I/O connector: 64-pin female receptacle header. (AMP 120527-1 or equivalent). 64 I/O connections (30 LVDS pairs plus two global clocks). Vcco pins powered by 2.5V and support the 2.5V I/O standards.

Environmental

Operating temperature:
XMC-7K325AX-LF: Conduction-cooled, -40 to 70°C.
XMC-7K410AX-LF: Conduction-cooled, -40 to 70°C

Storage temperature: -55 to 125°C.

Relative humidity: 5 to 95% non-condensing.

Power: 3.3V (±5%): 7.8W typical. 12V (±5%): 2.7W typical. 3.3V AUX (±5%): 57µW

MTBF: Contact the factory.

  • Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
  • 128M x 64-bit DDR3 SDRAM
  • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
  • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
  • 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
  • 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
  • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
  • DMA support provides data transfer between system memory and the on-board memory
  • Support for Xilinx ChipScope™ Pro interface
  • Extended temperature conduction-cooled

Manuals

XMC 7-Series User's Manual (Log in to download the file)

Drawings & Diagrams

PCISW-API-LNX (Log in to download the file)
  • Compare

    PCISW-API-WIN

    • Support for Acromag XMC, PMC, PCI, CompactPCI cards
    $310
    Select options
  • Compare

    PMCSW-API-VXW: VxWorks Libraries

    • VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
    • Supports any CPU target with quick modification.
    • API easily convertible for any operating system
    $835
    Select options
  • Compare

    XMC-7KA-EDK: Engineering Design Kit

    $375
    Select options

Additional information

Weight N/A
Dimensions 5 × 5 × 1 in
Part Number

XMC-7KA-EDK: Engineering design kit

  • Description

    Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.

    The design kit is intended for users fluent in the use of Xilinx, VHDL and Visual C++.

  • Features & Benefits

    • Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
    • 128M x 64-bit DDR3 SDRAM
    • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
    • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
    • 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
    • 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
    • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
    • DMA support provides data transfer between system memory and the on-board memory
    • Support for Xilinx ChipScope™ Pro interface
    • Extended temperature conduction-cooled
  • Specs & Data Sheets

    Manuals

    XMC 7-Series User's Manual (Log in to download the file)

    Drawings & Diagrams

  • Software

    PCISW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      PCISW-API-WIN

      • Support for Acromag XMC, PMC, PCI, CompactPCI cards
      $310
      Select options
    • Compare

      PMCSW-API-VXW: VxWorks Libraries

      • VxWorks function libraries for XMC, PMC, PCI and CompactPCI products (except IP carriers)
      • Supports any CPU target with quick modification.
      • API easily convertible for any operating system
      $835
      Select options
    • Compare

      XMC-7KA-EDK: Engineering Design Kit

      $375
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions 5 × 5 × 1 in
    Part Number

    XMC-7KA-EDK: Engineering design kit