XMC730 Multi-Function I/O
Please sign in or register to see model options and to add products to your cart.
Product short description:
- Analog input
- Analog output
- Digital I/O
- Counter/timers
- Conduction-cooled options
High-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Click here to watch a short video highlighting the features of the Acromag XMC730.
XMC730 Multi-Function I/O Description
XMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card.
These new high-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Now you can conserve your precious XMC slots and still get all the I/O functionality you need.
The XMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the XMC730 is still very budget-friendly. A conduction-cooled version is also available.
Learn more about XMC mezzanine modules and see all models >
XMC730 Multi-Function I/O Mezzanine Module Features & Benefits
Analog Inputs
- 16 differential (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
- 16-bit ADC with integral sample-and-hold and reference
- 1.264μS conversion time (791KHz rate)
- 1026 sample FIFO buffer
- Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
- User-programmable channel conversion sequence and timing
- External trigger input or output
- Factory calibration constants stored in on-board flash memory for error correction
Analog Outputs
- Eight analog output channels (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
- Individual 16-bit DACs per channel with 7.5μS settling time
- Flexible operating mode, trigger, and memory allocation
- Configurable for direct access, single burst, continuous, or streaming (FIFO) output
- Reliable software calibration with coefficients stored on-board
- FIFO for waveform generation
- Interrupt on user-programmable FIFO threshold
- Shared 64K x 16-bit sample memory
Digital I/O
- 16 bidirectional input/output channels (direction configured in 8-channel groups)
- TTL-compatible thresholds
- Programmable change-of-state/level interrupts
- Failsafe power-up and system reset
Counter/Timers
- Multi-function 32-bit counter/timer
- Quadrature Position measurement
- Pulse Width modulation
- Watchdog timer
- Event counter
- Frequency measurement
- Pulse-width or period measurement
- One-shot and repetitive one-shot pulse waveform generation
- Programmable interface polarity
- Internal or external triggering
- CMOS compatible thresholds
General
- DMA transfer support to move data between module memory and PCIe bus
- Software development tools for VxWorks®, Linux®, and Windows® environments
Specs & Catalogs
Manuals
XMC730 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
Additional information
Weight | N/A |
---|---|
Dimensions | 7 × 4 × 1 in |
Part Number | XMC730: Front I/O 68-pin SCSI-2 connector., XMC730E: Front I/O 68-pin SCSI-2 connector, extended temperature., XMC730CC: Rear P16 and P4 connectors, conduction-cooled. |
-
Description
XMC730 Multi-Function I/O Description
XMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card.
These new high-density modules perform both high-speed and high resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.
Now you can conserve your precious XMC slots and still get all the I/O functionality you need.
The XMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the XMC730 is still very budget-friendly. A conduction-cooled version is also available.
Learn more about XMC mezzanine modules and see all models >
XMC730 Multi-Function I/O Mezzanine Module Features & Benefits
Analog Inputs
- 16 differential (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
- 16-bit ADC with integral sample-and-hold and reference
- 1.264μS conversion time (791KHz rate)
- 1026 sample FIFO buffer
- Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
- User-programmable channel conversion sequence and timing
- External trigger input or output
- Factory calibration constants stored in on-board flash memory for error correction
Analog Outputs
- Eight analog output channels (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
- Individual 16-bit DACs per channel with 7.5μS settling time
- Flexible operating mode, trigger, and memory allocation
- Configurable for direct access, single burst, continuous, or streaming (FIFO) output
- Reliable software calibration with coefficients stored on-board
- FIFO for waveform generation
- Interrupt on user-programmable FIFO threshold
- Shared 64K x 16-bit sample memory
Digital I/O
- 16 bidirectional input/output channels (direction configured in 8-channel groups)
- TTL-compatible thresholds
- Programmable change-of-state/level interrupts
- Failsafe power-up and system reset
Counter/Timers
- Multi-function 32-bit counter/timer
- Quadrature Position measurement
- Pulse Width modulation
- Watchdog timer
- Event counter
- Frequency measurement
- Pulse-width or period measurement
- One-shot and repetitive one-shot pulse waveform generation
- Programmable interface polarity
- Internal or external triggering
- CMOS compatible thresholds
General
- DMA transfer support to move data between module memory and PCIe bus
- Software development tools for VxWorks®, Linux®, and Windows® environments
-
Specs & Data Sheets
Specs & Catalogs
Manuals
XMC730 User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
-
Accessories
-
Termination Products
- DIN rail-mount panels
- 50 screw terminals on 50-pin connector termination panels
- 50 screw terminals on SCSI-2 connector termination panels
- 68 screw terminals on SCSI-3 connector termination panels
-
Additional information
Additional information
Weight N/A Dimensions 7 × 4 × 1 in Part Number XMC730: Front I/O 68-pin SCSI-2 connector., XMC730E: Front I/O 68-pin SCSI-2 connector, extended temperature., XMC730CC: Rear P16 and P4 connectors, conduction-cooled.
Please login to submit this form.