Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • XMC module with PCIe & SFP+/AMD Aurora interface
  • Logic-optimized AMD Kintex 7 FPGA
  • 10-Gigabit Ethernet

Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface.

The logic-optimized FPGA is well-suited for a broad range of applications.

XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports Description

Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface.

The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.

Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.

The rear I/O provides a 4-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines.

SelectIO signals are AMD Kintex 7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).

With Acromag’s AMD Kintex 7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.

Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional AMD Xilinx tools help finish your system faster.

Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

Learn more about FPGA modules and see all models >

XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports Features & Benefits

  • Reconfigurable AMD Xilinx Kintex 7 FPGA with 325k or 410k logic cells
  • 128M x 64-bit DDR3 SDRAM
  • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
  • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidIO, 10Gb Ethernet, AMD Xilinx Aurora
  • 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
  • Dual SFP+ ports for Fibre Channel or 10GbE
  • 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
  • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
  • 22 SelectI/O, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
  • DMA support provides data transfer between system memory and the on-board memory
  • Support for AMD Xilinx ChipScope™ Pro interface
XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)
PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)
PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)
PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file)
  • Compare

    5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver

    Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452.
    Select options
  • Compare

    5028-455: 1000BASE-T Copper SFP Transceiver

    Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455.
    Select options
  • Compare

    5025-921: VHDCI Cable

    Acromag provides a cable that brings the 36 pins of the VHDCI front I/O connector out to a 50 pin SCSI connector. Front VHDCI Field I/O Pin Connections. The Acromag part number is 5025-921.
    Select options
  • Compare

    TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors

    Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M.
    Select options
  • Compare

    XMC-7KA-EDK: Engineering Design Kit

    Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
    Select options

Additional information

Weight 16 oz
Dimensions 7 × 4 × 1 in
Part Number

XMC-7K325F-LF: 325k logic cells, XMC-7K410F-LF: 410k logic cells

FPGA Type

Xilinx Kintex-7

Product Series

Kintex-7 Series

  • Description

    XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports Description

    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface.

    The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

    The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

    Two versions of this module are available, offering a choice of an FPGA device with 325k or 410k logic cells.

    Front I/O adds dual SFP+ ports and a VHDCR connector. The two SFP+ ports each provide a copper or fibre interface of up to 10.3125Gbps. They also support a Gigabit Ethernet interface. The VHDCR connector interfaces JTAG, USB, and 22 SelectIO.

    The rear I/O provides a 4-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines.

    SelectIO signals are AMD Kintex 7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).

    With Acromag’s AMD Kintex 7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

    These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.

    Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional AMD Xilinx tools help finish your system faster.

    Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

    Learn more about FPGA modules and see all models >

    XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports Features & Benefits

    • Reconfigurable AMD Xilinx Kintex 7 FPGA with 325k or 410k logic cells
    • 128M x 64-bit DDR3 SDRAM
    • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
    • 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidIO, 10Gb Ethernet, AMD Xilinx Aurora
    • 4-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
    • Dual SFP+ ports for Fibre Channel or 10GbE
    • 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
    • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
    • 22 SelectI/O, 2 global clock pairs, JTAG, USB, and ground signals via front 36-pin connector
    • DMA support provides data transfer between system memory and the on-board memory
    • Support for AMD Xilinx ChipScope™ Pro interface
  • Specs & Data Sheets

  • Software

    XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)
    PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)
    PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)
    PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file)
  • Accessories

    • Compare

      5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver

      Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452.
      Select options
    • Compare

      5028-455: 1000BASE-T Copper SFP Transceiver

      Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455.
      Select options
    • Compare

      5025-921: VHDCI Cable

      Acromag provides a cable that brings the 36 pins of the VHDCI front I/O connector out to a 50 pin SCSI connector. Front VHDCI Field I/O Pin Connections. The Acromag part number is 5025-921.
      Select options
    • Compare

      TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors

      Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M.
      Select options
    • Compare

      XMC-7KA-EDK: Engineering Design Kit

      Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
      Select options
  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 7 × 4 × 1 in
    Part Number

    XMC-7K325F-LF: 325k logic cells, XMC-7K410F-LF: 410k logic cells

    FPGA Type

    Xilinx Kintex-7

    Product Series

    Kintex-7 Series