XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules
Please sign in or register to see model options and to add products to your cart.
Product short description:
- Logic-optimized Kintex-7 FPGA
- XMC module with PCIe interface
- Conduction-Cooled
Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules Description
Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. Select I/O signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)
Two versions of the Kintex-7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.
With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller. See EDK kit.
Learn more about FPGA options and view all models >
XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules Features & Benefits
- Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
- 128M x 64-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
- 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- DMA support provides data transfer between system memory and the on-board memory
- Support for Xilinx ChipScope™ Pro interface
- Extended temperature conduction-cooled
Specifications
Manuals
XMC 7-Series User's Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
Additional information
Weight | 8 oz |
---|---|
Dimensions | 7 × 4 × 1 in |
Part Number | XMC-7K325CC-LF: 325k logic cells, XMC-7K410CC-LF: 410k logic cells |
FPGA Type | Xilinx Kintex-7 |
Product Series | Kintex-7 Series |
Logic Cells | 325k, 410k |
-
Description
XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules Description
Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer-installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. Select I/O signals are Kintex-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)
Two versions of the Kintex-7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.
With Acromag’s Kintex-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating high-speed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Example FPGA program: IP integrator block diagram provided for bus interface, front & rear I/O control, and SDRAM memory interface controller. See EDK kit.
Learn more about FPGA options and view all models >
XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules Features & Benefits
- Reconfigurable Xilinx Kintex-7 FPGA with 325k or 410k logic cells
- 128M x 64-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
- 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- DMA support provides data transfer between system memory and the on-board memory
- Support for Xilinx ChipScope™ Pro interface
- Extended temperature conduction-cooled
-
Tech Papers
How to Install an XMC-7K325AX-LF FPGA Module with an AXM-D02 or AXM-A75 I/O Module, Installed on an Apce8675 Carrier Card - 8500927XMC-7K325AX-LF: User-configurable Kintex-7 FPGA module features 325k logic cells & front I/O AXM support. APCe8675 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system. This carrier is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted... -
Specs & Data Sheets
Specifications
Manuals
XMC 7-Series User's Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file) -
Accessories
-
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
-
-
Additional information
Additional information
Weight 8 oz Dimensions 7 × 4 × 1 in Part Number XMC-7K325CC-LF: 325k logic cells, XMC-7K410CC-LF: 410k logic cells
FPGA Type Xilinx Kintex-7
Product Series Kintex-7 Series
Logic Cells 325k, 410k
Please login to submit this form.