XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O
Please sign in or register to see model options and to add products to your cart.
Product short description:
- Logic-optimized AMD Kintex 7 FPGA
- XMC module with PCIe interface
- I/O Extension Mezzanine Modules
XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O Description
Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
Both front and rear I/O is supported. Front I/O processing is supported with plug-in AXM mezzanine cards. A variety of AXM I/O cards are available to add the flexibility of a wide range of analog and digital I/O to your design.
The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are AMD Kintex 7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).
Two versions of the AMD Kintex 7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.
With Acromag’s AMD Kintex 7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating highspeed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging.
Additional AMD Xilinx tools help finish your system faster. Maximize FPGA performance with AMD Vivado® or ISE® Design Suite. And with AMD ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Learn more about FPGA modules and see all models >
XMC-7K AX: User-Configurable Kintex 7 FPGA Modules with Plug-In I/O Features & Benefits
- Reconfigurable AMD Xilinx Kintex 7 FPGA with 325k or 410k logic cells
- 128M x 128-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidIO, 10Gb Ethernet, AMD Xilinx Aurora
- 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- DMA support provides data transfer between system memory and the on-board memory
- Support for AMD Xilinx ChipScope™ Pro interface
Note: AXM-A30 is not supported.
Specifications
Manuals
XMC 7-Series User's Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
AXM-A30: Analog Input Extension I/O Module for PMC FPGAs
- High-Speed Analog Input
- Two Differential Channels
- Two 16-bit A/D Channels
-
AXM-A75: Multi-function I/O for PMC & XMC FPGAs
- 16 analog inputs, simultaneous A/D
- 8 analog outputs, simultaneous D/A
- 16 digital I/O channels
-
AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs
- Plug-In I/O Modules
- Choose from four I/O Options
- JTAG Support Option
-
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
Additional information
Weight | 8 oz |
---|---|
Dimensions | 7 × 4 × 1 in |
Part Number | XMC-7K325AX-LF: 325k logic cells, XMC-7K410AX-LF: 410k logic cells |
FPGA Type | Xilinx Kintex-7 |
Product Series | Kintex-7 Series |
Logic Cells | 325k, 410k |
-
Description
XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O Description
Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.
The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.
Both front and rear I/O is supported. Front I/O processing is supported with plug-in AXM mezzanine cards. A variety of AXM I/O cards are available to add the flexibility of a wide range of analog and digital I/O to your design.
The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels. The P4 port adds another 60 SelectIO and global clock lines. SelectIO signals are AMD Kintex 7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL).
Two versions of the AMD Kintex 7 are available, offering a choice of an FPGA device with 325k or 410k logic cells.
With Acromag’s AMD Kintex 7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.
These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating highspeed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.
Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board debugging.
Additional AMD Xilinx tools help finish your system faster. Maximize FPGA performance with AMD Vivado® or ISE® Design Suite. And with AMD ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.
Learn more about FPGA modules and see all models >
XMC-7K AX: User-Configurable Kintex 7 FPGA Modules with Plug-In I/O Features & Benefits
- Reconfigurable AMD Xilinx Kintex 7 FPGA with 325k or 410k logic cells
- 128M x 128-bit DDR3 SDRAM
- 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
- 8-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidIO, 10Gb Ethernet, AMD Xilinx Aurora
- 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
- 60 SelectIO or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
- 34 SelectIO or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
- DMA support provides data transfer between system memory and the on-board memory
- Support for AMD Xilinx ChipScope™ Pro interface
Note: AXM-A30 is not supported.
-
Tech Papers
How to Install an XMC-7K325AX-LF FPGA Module with an AXM-D02 or AXM-A75 I/O Module, Installed on an Apce8675 Carrier Card - 8500927XMC-7K325AX-LF: User-configurable Kintex-7 FPGA module features 325k logic cells & front I/O AXM support. APCe8675 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system. This carrier is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted... -
Specs & Data Sheets
Specifications
Manuals
XMC 7-Series User's Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Software
XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file)PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file) -
Accessories
-
AXM-A30: Analog Input Extension I/O Module for PMC FPGAs
- High-Speed Analog Input
- Two Differential Channels
- Two 16-bit A/D Channels
-
AXM-A75: Multi-function I/O for PMC & XMC FPGAs
- 16 analog inputs, simultaneous A/D
- 8 analog outputs, simultaneous D/A
- 16 digital I/O channels
-
AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs
- Plug-In I/O Modules
- Choose from four I/O Options
- JTAG Support Option
-
XMC-7KA-EDK: Engineering Design Kit
Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
-
-
Additional information
Additional information
Weight 8 oz Dimensions 7 × 4 × 1 in Part Number XMC-7K325AX-LF: 325k logic cells, XMC-7K410AX-LF: 410k logic cells
FPGA Type Xilinx Kintex-7
Product Series Kintex-7 Series
Logic Cells 325k, 410k
Please login to submit this form.