Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • Logic-optimized Artix-7 FPGA
  • XMC module with PCIe interface
  • I/O Extension Mezzanine Modules

Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

 

XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O Description

Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

Both front and rear I/O is supported. Front I/O processing is supported with plug-in AXM mezzanine cards. A variety of AXM I/O cards are available to add the flexibility of a wide range of analog and digital I/O to your design.

The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels.

The P4 port adds another 60 SelectIO and global clock lines. SelectI/O signals are Artix-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)

With Acromag’s Artix-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating highspeed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.

Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly.

A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

Learn more about FPGA modules and see all models >

XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O Features & Benefits

  • Reconfigurable Xilinx Artix-7 FPGA with 200k logic cells
  • 128M x 64-bit DDR3 SDRAM
  • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
  • 4-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
  • 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
  • 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
  • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
  • DMA support provides data transfer between system memory and the on-board memory
  • Support for Xilinx ChipScope™ Pro interface

Note: AXM-A30 is not supported.

XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)
PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)
PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)
PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file)
  • Compare

    AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

    • High-Speed Analog Input
    • Two Differential Channels
    • Two 16-bit A/D Channels
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare

    AXM-A75: Multi-function I/O for PMC & XMC FPGAs

    • 16 analog inputs, simultaneous A/D
    • 8 analog outputs, simultaneous D/A
    • 16 digital I/O channels
    The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare

    AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

    • Plug-In I/O Modules
    • Choose from four I/O Options
    • JTAG Support Option
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Compare

    XMC-7KA-EDK: Engineering Design Kit

    Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
    Select options This product has multiple variants. The options may be chosen on the product page

Additional information

Weight 8 oz
Dimensions 13 × 12 × 3 in
Part Number

XMC-7A200-LF: User-configurable Artix-7 FPGA

FPGA Type

Xilinx Artix-7

Product Series

Artix-7 Series

Logic Cells

200K

  • Description

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O Description

    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

    The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

    The logic-optimized FPGA is well-suited for a broad range of applications. Typical uses include hardware simulation, communications, in-circuit diagnostics, military servers, signal intelligence, and image processing.

    Both front and rear I/O is supported. Front I/O processing is supported with plug-in AXM mezzanine cards. A variety of AXM I/O cards are available to add the flexibility of a wide range of analog and digital I/O to your design.

    The rear I/O provides an 8-lane high-speed serial interface on the P16 XMC port for customer installed soft cores. P16 also supports 34 SelectIO channels.

    The P4 port adds another 60 SelectIO and global clock lines. SelectI/O signals are Artix-7 FPGA I/O pins that support single-ended I/O (LVCMOS, HSTL, SSTL) and differential I/O standards (LVDS, HT, LVPECL, BLVDS, HSTL, SSTL)

    With Acromag’s Artix-7 FPGA modules, you can greatly increase DSP algorithm performance for faster throughput using multiple channels and parallel hardware architectures. Free up CPU cycles by offloading algorithmic-intensive tasks to the FPGA co-processor.

    These modules are ideal for high-performance customized embedded systems. Optimize your system performance by integrating highspeed programmable logic with the flexibility of software running on MicroBlaze™ soft processors.

    Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly.

    A JTAG interface enables on-board debugging. Additional Xilinx tools help finish your system faster. Maximize FPGA performance with Vivado® or ISE® Design Suite. And with ChipScope™ Pro tools, you can rapidly debug logic and serial interfaces.

    Learn more about FPGA modules and see all models >

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O Features & Benefits

    • Reconfigurable Xilinx Artix-7 FPGA with 200k logic cells
    • 128M x 64-bit DDR3 SDRAM
    • 32M x 16-bit parallel flash memory for MicroBlaze FPGA program code storage
    • 4-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, 10Gb Ethernet, Xilinx Aurora
    • 8-lane high-speed interfaces on rear P16 connector for customer-installed soft cores
    • 60 SelectI/O or 30 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P4 port
    • 34 SelectI/O or 17 LVDS pairs plus 2 global clock pairs direct to FPGA via rear P16 port
    • DMA support provides data transfer between system memory and the on-board memory
    • Support for Xilinx ChipScope™ Pro interface

    Note: AXM-A30 is not supported.

  • Specs & Data Sheets

  • Software

    XMC-7KA-EDK: Engineering Design Kit Information Page (Log in to download the file)
    PCISW-API-LNX: Linux Support Driver Download (Log in to download the file)
    PCISW-API-WIN: Windows Support Driver Information Page (Log in to download the file)
    PMCSW-API-VXW: VxWorks Support Driver Information Page (Log in to download the file)
  • Accessories

    • Compare

      AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

      • High-Speed Analog Input
      • Two Differential Channels
      • Two 16-bit A/D Channels
      These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
      Select options This product has multiple variants. The options may be chosen on the product page
    • Compare

      AXM-A75: Multi-function I/O for PMC & XMC FPGAs

      • 16 analog inputs, simultaneous A/D
      • 8 analog outputs, simultaneous D/A
      • 16 digital I/O channels
      The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
      Select options This product has multiple variants. The options may be chosen on the product page
    • Compare

      AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

      • Plug-In I/O Modules
      • Choose from four I/O Options
      • JTAG Support Option
      These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
      Select options This product has multiple variants. The options may be chosen on the product page
    • Compare

      XMC-7KA-EDK: Engineering Design Kit

      Acromag provides an engineering design kit for the XMC-7K and XMC-7A series products, a “must buy” for first time XMC-7K/XMC-7A series module purchasers.
      Select options This product has multiple variants. The options may be chosen on the product page
  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 13 × 12 × 3 in
    Part Number

    XMC-7A200-LF: User-configurable Artix-7 FPGA

    FPGA Type

    Xilinx Artix-7

    Product Series

    Artix-7 Series

    Logic Cells

    200K