AP570: MIL-STD-1553 Communication Module
Product short description:
- One dual redundant MIL-STD-1553 channel
- Extended temperature
- PCIe bus interface
AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O.
Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
AP570: MIL-STD-1553 Communication Module
The AP570 MIL-STD-1553 communication modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Hard wired RT address signal input pins are also available at the connector.
This Acropack card utilizes the latest AIM Common Hardware Core derived from the field proven MIL-STD-1553 interface to deliver low power consumption and high performance for rugged environments and embedded applications.
AP571-000:Â Single function MIL-STD-1553.
AP572-000:Â Full multi-function MIL-STD-1553.
Options (Contact factory for ordering): Direct coupled MIL-STD-1553 bus. | Safety critial monitoring only (Tx inhibit). | Polyurethane conformal coating.
The AcroPack® product line updates our popular Industry Pack I/O modules with a PCIe interface format. This tech-refresh design offers a compact size, low-cost I/O, and a rugged form factor. Combining different AcroPack module types on one XMC, VPX, or PCIe carrier allows for a simplified modular approach to system assembly.
Designed for COTS applications these avionics communication mezzanine modules deliver high-density, high-reliability, and high-performance at a low cost.
The AP570 MIL-STD-1553 communication modules are 70mm long, which is 19.05mm longer than the full-length mini PCIe card at 50.95mm. The board’s width is the same as an mPCIe board of 30mm and uses the same mPCIe standard board hold down standoff and screw keep-out areas.
A down-facing 100-pin Samtec connector mates with the carrier card. This ensures a secure connection for your I/O without the vulnerabilities of cabling.
Learn more about the AcroPack Series and view all the models >
AP570: MIL-STD-1553 Communication Module Benefits & Features
BC Features
- Autonomous operation including sequencing of multiple minor and major frames.
- Support for acyclic message insertion/deletion.
- Support for instructions for synchronization to external events and timing control.
- Programmable BC retry without host interaction.
- Multi-buffering with real time data buffer updates.
- Synchronization of BC operation to external trigger inputs and outputs.
- 4μs intermessage gaps.
- Interrupt generation on BC transfer events.
Multi-RT Features
- Programmable RT response time down to 4μs for each simulated RT.
- Programmable & intelligent response to mode codes.
- Multi-buffering with real time data buffer updates.
- Mailbox monitor mode.
- Interrupt generation on RT events.
MT Features
- 100% data capture on 1 stream at full bus rates.
- Single shot, continuous or selective capture modes.
- Autonomous message synchronization and full error detection.
- Static/dynamic complex triggers with sequencing.
- Message filter and selective capture.
- Bus activity recording independent from trigger and capture mode.
- Time tagging: – All bus traffic to 1μs – intermessage gaps & response time to 250ns.
- External Trigger Inputs and Outputs.
- Programmable response time.
IRIG-B Time Encoder/Decoder
- Onboard, free wheeling IRIG-B formatted time encoder/decoder for time tagging.
- Amplitude modulated sinusoidal IRIG-B output.
- Synchronization with multiple AIM modules or any IRIG-B compatible module.
Discrete I/O
- 4 bi-directional open/ground 35V avionics discrete I/O signals.
- 2 additional LVTTL digital discrete inputs.
- 6 signals above can be used for hard-wired RT address input support.
Driver Software Support
- Common application programming interface (API) supports C and C#.
- Drivers for 32/64-bit Linux and 32/64-bit Windows7/8/8.1/10, and VxWorks 7.
Learn more about the AcroPack Series and view all the models >
Specifications
Manuals
AP570 Hardware User Manual (Log in to download the file)
AP570 Programmer's User Manual (Log in to download the file)
AP570 Reference User Manual (Log in to download the file)
AP570 Breakout Cable User Manual (Log in to download the file)
AP570 Board Support Package User Manual - Linux (Log in to download the file)
AP570 Board Support Package User Manual - VxWorks (Log in to download the file)
AP570 Board Support Package User Manual - Windows (Log in to download the file)
Drawings & Diagrams
-
5028-621 Breakout Panel
Breakout panel for AP570 series. Converts 68-pin CHAMP to two TRB jacks and one DB15 connector.
Additional information
Weight | 0.8 oz |
---|---|
Dimensions | 3.25 × 1.25 × 1 in |
Communication | MIL-STD-1553 |
Product Series | AcroPack Series |
-
Description
AP570: MIL-STD-1553 Communication Module
The AP570 MIL-STD-1553 communication modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Hard wired RT address signal input pins are also available at the connector.
This Acropack card utilizes the latest AIM Common Hardware Core derived from the field proven MIL-STD-1553 interface to deliver low power consumption and high performance for rugged environments and embedded applications.
AP571-000:Â Single function MIL-STD-1553.
AP572-000: Full multi-function MIL-STD-1553.Options (Contact factory for ordering): Direct coupled MIL-STD-1553 bus. | Safety critial monitoring only (Tx inhibit). | Polyurethane conformal coating.
The AcroPack® product line updates our popular Industry Pack I/O modules with a PCIe interface format. This tech-refresh design offers a compact size, low-cost I/O, and a rugged form factor. Combining different AcroPack module types on one XMC, VPX, or PCIe carrier allows for a simplified modular approach to system assembly.
Designed for COTS applications these avionics communication mezzanine modules deliver high-density, high-reliability, and high-performance at a low cost.
The AP570 MIL-STD-1553 communication modules are 70mm long, which is 19.05mm longer than the full-length mini PCIe card at 50.95mm. The board’s width is the same as an mPCIe board of 30mm and uses the same mPCIe standard board hold down standoff and screw keep-out areas.
A down-facing 100-pin Samtec connector mates with the carrier card. This ensures a secure connection for your I/O without the vulnerabilities of cabling.
Learn more about the AcroPack Series and view all the models >
AP570: MIL-STD-1553 Communication Module Benefits & Features
BC Features
- Autonomous operation including sequencing of multiple minor and major frames.
- Support for acyclic message insertion/deletion.
- Support for instructions for synchronization to external events and timing control.
- Programmable BC retry without host interaction.
- Multi-buffering with real time data buffer updates.
- Synchronization of BC operation to external trigger inputs and outputs.
- 4μs intermessage gaps.
- Interrupt generation on BC transfer events.
Multi-RT Features
- Programmable RT response time down to 4μs for each simulated RT.
- Programmable & intelligent response to mode codes.
- Multi-buffering with real time data buffer updates.
- Mailbox monitor mode.
- Interrupt generation on RT events.
MT Features
- 100% data capture on 1 stream at full bus rates.
- Single shot, continuous or selective capture modes.
- Autonomous message synchronization and full error detection.
- Static/dynamic complex triggers with sequencing.
- Message filter and selective capture.
- Bus activity recording independent from trigger and capture mode.
- Time tagging: – All bus traffic to 1μs – intermessage gaps & response time to 250ns.
- External Trigger Inputs and Outputs.
- Programmable response time.
IRIG-B Time Encoder/Decoder
- Onboard, free wheeling IRIG-B formatted time encoder/decoder for time tagging.
- Amplitude modulated sinusoidal IRIG-B output.
- Synchronization with multiple AIM modules or any IRIG-B compatible module.
Discrete I/O
- 4 bi-directional open/ground 35V avionics discrete I/O signals.
- 2 additional LVTTL digital discrete inputs.
- 6 signals above can be used for hard-wired RT address input support.
Driver Software Support
- Common application programming interface (API) supports C and C#.
- Drivers for 32/64-bit Linux and 32/64-bit Windows7/8/8.1/10, and VxWorks 7.
Learn more about the AcroPack Series and view all the models >
-
Specs & Data Sheets
Specifications
Manuals
AP570 Hardware User Manual (Log in to download the file)
AP570 Programmer's User Manual (Log in to download the file)
AP570 Reference User Manual (Log in to download the file)
AP570 Breakout Cable User Manual (Log in to download the file)
AP570 Board Support Package User Manual - Linux (Log in to download the file)
AP570 Board Support Package User Manual - VxWorks (Log in to download the file)
AP570 Board Support Package User Manual - Windows (Log in to download the file)
Drawings & Diagrams
-
Software
-
Accessories
-
5028-621 Breakout Panel
Breakout panel for AP570 series. Converts 68-pin CHAMP to two TRB jacks and one DB15 connector.
-
-
Additional information
Additional information
Weight 0.8 oz Dimensions 3.25 × 1.25 × 1 in Communication MIL-STD-1553
Product Series AcroPack Series
Please login to submit this form.