Click to zoom
$980
Clear
Product short description:
  • Compatible with XVME-6510 and XVME-6700 SBC models
  • Variety of additional connectors
[DISPLAY_ULTIMATE_PLUS]

Acromag’s XVME-9640 rear transition module adds a variety of I/O connectors to the XVME-6510 and XVME-6700 VME single board computers.

The XVME-9640 module may be installed into the rear slot directly behind the XVME-6510/ XVME-6700 to easily access all of the available I/O on the XVME 6510 / XVME7700’s P2, and optionally P0 connectors, as well as allow mSATA SSD modules to be added for storage.

The XVME-9640 contains two mSATA sockets that allow two SSD drives to be added while still remaining within a single VME slot. Using the software RAID functionality of the QM87 PCH, these drives can even be setup as a RAID0/1 array if redundancy or extra speed is desired.

WARNING: mSATA requires P0 on both the XVME-6500 / XVME-6700 and XVME-9640 for proper operation.

Note: The standard XVME-9640 cannot be used in a backplane that uses VITA 31.1 Ethernet. A custom build option is available that isolates the Ethernet lines for use in a VITA 31.1 system.

Please consult factory for this option.

I/O is available on the front panel of the XVME-9640:
• Two optional Gigabit Ethernet ports are available on the front panel’s optional
• RJ Point 5 connector
• One VGA port
• One DVI-D port
• Two USB 2.0 ports
• PMC/XMC I/O from P2

I/O is available via internal connectors on the XVME-9640:
• Stereo Audio Line-In & Line-Out
• One software-selectable RS-232/RS-485 serial port
• PMC/XMC I/O from RJ0 connector is available via two optional high-speed Samtec connectors

  • I/O available on the board via standard connectors:
    • VGA
    • USB (2)
    • DVI-D
    • PMC I/O from P2
  • Available via headers:
    • Audio
    • RS-232/422/485 Serial (1)
  • Additionally available*:
    • Ethernet (2) thru RJ Point 5 connector*
    • PMC I/O from P0*

*requires P0 connector

Manuals

XVME-6510 User Manual (Log in to download the file)

XVME-6700 User Manual (Log in to download the file)

Catalogs

  • Compare

    XVME-6510: 6U VME Intel® Core™ i7 Air Cooled Processor Board

    • Intel® i7 CPU
    • Up to 16GB DDR3L ECC RAM
    • BIOS Selectable Byte Swapping
    • Dual PMC/XMC Sites
    $7,110$7,625
    Read more
  • Compare

    XVME-6700: 6U VME Intel® Celeron® 2002E Air Cooled Processor Board

    • Celeron-based board for cost-sensitive applications
    • FPGA-based VME to PCIe bridge
    • Intel 8-Series QM87 PCH chipset
    • Up to 1.50GHz CPU
    • Up to 16GB DDR3L ECC RAM
    • Dual PMC/XMC Sites
     
    $5,660$6,175
    Read more

Additional information

Weight 17.8 oz
Dimensions 9.187 × 6.3 × 0.8 in
Part Number

XVME-6700-7080-LF: 8GB Memory, P0 connector, XVME-6700-7080E-LF: 8GB Memory, P0 connector, extended operating temp., XVME-6700-7081-LF: 8GB Memory, no P0 connector, XVME-6700-7081E-LF: 8GB Memory, no P0 connector, extended operating temp., XVME-6700-7082-LF: 8GB Memory, P0 connector, no battery, XVME-6700-7082E-LF: 8GB Memory, P0 connector, extended operating temp., no battery, XVME-6700-7083-LF: 8GB Memory, no P0 connector, no battery, XVME-6700-7083E-LF: 8GB Memory, no P0 connector, extended operating temp., no battery

  • Description

    If you’re one of the thousands who depends on the continued use of your VMEbus systems you can feel confident that Acromag is there for you. This single board computer updates your legacy systems with an Intel processor that will deliver an enhanced microarchitecture, integrated graphics, and expanded memory performance with 8 GB of high-bandwidth DDR3L memory and ECC memory controllers.

    The XVME-6700 will add 7 to 10 years of life to your system with modern technology. This high-performance SBC features a FPGA-based VME to PCIe-bridge that solved the end of life issue with the TSI148 VME interface chip.

    Ruggedized SODIMM removable memory is surrounded by heat sink material to provide a robust hold-down mechanism. The SODIMM is secured with four screws so it is easy to replace faulty memory.

    Operating System Software

    Linux, VxWorks and Windows 7+

    Advanced Vector Extensions 2.0 for enhanced performance on floating point-intensive applications and Hyper-Threading Technology that enables each core to use two software threads for more efficient use of the CPU.

    Expansion Capabilities

    In addition to a comprehensive range of front panel and backplane I/O features, the XVME- 6700 offers increased expansion capabilities through two PMC/XMC sites on the board.

    In lieu of one PMC/XMC module, the optional XBRD-9060 expansion I/O carrier module may be installed. The XBRD-9060 allows for two SSD mSATA drives, as well as another Gigabit Ethernet port, RS-232 port, and two USB 2.0 ports.

    The XVME-9640 rear transition module is also available for storage, networking, and easy access to the P2 connector I/O.

    Performance Specifications

    Processor: Intel® Celeron® Processor 2002E (2M Cache, 1.50 GHz)
    Chipset: Intel 8-Series QM87 PCH chipset. Intel DH82QM87 Platform Controller Hub
    Memory: 8GB of 1600 DDR3L ECC memory
    Flash Memory: 8GB standard
    Software Support: VxWorks, Linux and Windows 7+

    Bus Compliance

    VMEbus Interface: P1 and P2 connectors are compatible with VME67x VME Master/Slave using FPGA-based VME to PCIe bridge. A32/A24/A16/D32/D16/D8, MBLT64, 2eVME/2eSST
    Dual PMC/XMC Sites: 32/64-bit, 33/66/133MHz sites (IEEE P1386/P1386.1)
    Front panel I/O bezel and P4 module user I/O on optional P0 rear connector and P2 connector. (XMC module P16 connector I/O optionally available on P0 connector, please consult the factory).
    XMCs are PCIe x8
    Option to replace PMC/XMC #2 with the XBRD-9060

    System Integrity

    A two-digit LED display is available for power-on self test (POST) codes for problems during the boot operation. It can then be used for application software user codes to aid in software debugging.

    Form Factor

    6U VMEbus 9.2” (233mm) x 6.3” (160mm)

    Optional Expansion

    XBRD-9060
    Allows more I/O to the front panel, as well as mSATA SSD modules to be added for storage. Front panel I/O available are Gb Ethernet, RS-232 serial port, and two USB ports.
    The XBRD-9060 also contains two mSATA sockets that allow two SSD drives to be added while still remaining within a single VME slot. Using the software RAID functionality of the QM87 PCH, these drives can even be setup as a RAID 0/1 array if redundancy or extra speed is desired.

    XVME-9640
    Installed onto the rear slot directly behind the XVME- 6700 to easily access all of the available I/O on the P2, and optionally P0 connectors, as well as allow mSATA SSD modules to be added for storage. Front panel I/O available are two Gb Ethernet ports, one VGA port, one DVI-D port, and two USB ports. Internal connectors are also available. Please see the user manual for more information.

    Environmental

    Operating temperature: Standard temperature models: 0 to 70°C*. Extended temperature models: -40 to 75°C* * application dependent – see manual for details
    Storage temperature: -55 to 85°C
    Relative humidity: 5% to 95% at 60°C non-condensing
    Power Inputs from backplane: Dual Core Celeron. 5V (5V only backplane): 53W typical to 53W maximum, 37.5W typical. 5V (5V +3.3V backplane): 50W typical to 50.5W maximum, 35W typical. 3.3V (optional): 3W +/-12V: Used only for PMC/XMC

    Extensive Support

    With over 60 years’ experience, more than 35 of those years working with defense and military contracts, we are committed to providing embedded solutions for the best long term value in the industry. Designed and manufactured in the USA, this product comes with a 2-year warranty.

  • Features & Benefits

    • I/O available on the board via standard connectors:
      • VGA
      • USB (2)
      • DVI-D
      • PMC I/O from P2
    • Available via headers:
      • Audio
      • RS-232/422/485 Serial (1)
    • Additionally available*:
      • Ethernet (2) thru RJ Point 5 connector*
      • PMC I/O from P0*

    *requires P0 connector

  • Specs & Data Sheets

    Manuals

    XVME-6510 User Manual (Log in to download the file)

    XVME-6700 User Manual (Log in to download the file)

    Catalogs

  • Accessories

    • Compare

      XVME-6510: 6U VME Intel® Core™ i7 Air Cooled Processor Board

      • Intel® i7 CPU
      • Up to 16GB DDR3L ECC RAM
      • BIOS Selectable Byte Swapping
      • Dual PMC/XMC Sites
      $7,110$7,625
      Read more
    • Compare

      XVME-6700: 6U VME Intel® Celeron® 2002E Air Cooled Processor Board

      • Celeron-based board for cost-sensitive applications
      • FPGA-based VME to PCIe bridge
      • Intel 8-Series QM87 PCH chipset
      • Up to 1.50GHz CPU
      • Up to 16GB DDR3L ECC RAM
      • Dual PMC/XMC Sites
       
      $5,660$6,175
      Read more
  • Additional information

    Additional information

    Weight 17.8 oz
    Dimensions 9.187 × 6.3 × 0.8 in
    Part Number

    XVME-6700-7080-LF: 8GB Memory, P0 connector, XVME-6700-7080E-LF: 8GB Memory, P0 connector, extended operating temp., XVME-6700-7081-LF: 8GB Memory, no P0 connector, XVME-6700-7081E-LF: 8GB Memory, no P0 connector, extended operating temp., XVME-6700-7082-LF: 8GB Memory, P0 connector, no battery, XVME-6700-7082E-LF: 8GB Memory, P0 connector, extended operating temp., no battery, XVME-6700-7083-LF: 8GB Memory, no P0 connector, no battery, XVME-6700-7083E-LF: 8GB Memory, no P0 connector, extended operating temp., no battery