Click to zoom
$3,045$3,990
Clear
Product short description:
  • PMC-SLX150: 147,433 logic cells (XC6SLX150)

Acromag’s cost-effective PMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCI-X interface. Field I/O interfaces to the PMC FPGA via the rear J4/P4 connector and/or with optional front mezzanine AXM plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms.

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Large, high-speed memory banks enable efficient data handling. The dual-port SRAM facilitates high-speed DMA transfers to the bus or CPU. A high-bandwidth PCI-X interface ensures fast data throughput. 64 I/O lines are accessible through the rear (J4) connector. Additional I/O processing is supported on a separate mezzanine card that plugs into the PMC FPGA base board. A variety of these external AXM I/O cards are available to interface your analog and digital I/O signals. Take advantage of the conduction-cooled design for use in hostile environments. Conduction efficiently dissipates heat if there is inadequate cooling air flow. Optional extended temperature models operate reliably from -40 to 85°C. Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board VHDL debugging.

FPGA

FPGA Device: Xilinx Spartan-6 FPGA. Model XC6SLX150-3FG676 FPGA with 147,433 logic cells and 180 DSP48A1 slices.

FPGA Configuration: Download via PCI-X bus or flash memory.

Example FPGA Program: VHDL provided for bus interface, front & rear I/O control, SRAM read/write interface logic, and SDRAM memory interface controller. See EDK kit.

I/O Processing

Acromag AXM I/O modules: AXM modules plug into the PMC module’s front mezzanine for additional I/O lines. Analog and digital I/O AXM modules are sold separately.

Rear I/O: 64 I/O (32 LVDS) lines supported with a direct connection between the FPGA and the rear I/O connector (J4).

Engineering Design Kit

Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a PMC-SLX module (see www.acromag.com for more information).

PMC Compliance

Conforms to PCI Local Bus Specification, Revision 3.0 and CMC/PMC Specification, P1386.1.

Electrical/Mechanical Interface: Single-Width Module.

PCI Bus Modes: Supports PCI-X at 100MHz, 66MHz and Standard PCI at 66MHz and 33MHz

PCI-X Master/Target: 32-bit or 64-bit interface

Signaling: 3.3V compliant.

Interrupts (INTA#): Interrupt A is used to request an interrupt.

Environmental

Operating Temperature: -0 to 70°C or -40 to 85°C (E versions).

Storage Temperature: -55 to 125°C.

Relative Humidity: 5 to 95% non-condensing.

Power: 3.3V (±5%): 700mA typical, 840mA maximum; 5V (±5%): 1600mA typical, 2160mA maximum.

MTBF: Contact the factory

Watch: FPGA Computing for Speed and Flexibility

  • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
  • PCI-X bus 100MHz 64-bit interface
  • 256k x 64-bit dual-port SRAM provides direct links from the PCI bus and to FPGA (optional 1M x 64-bit)
  • Supports both front and rear I/O connections
  • 64 I/O or 32 LVDS lines direct to FPGA via rear (J4) connector
  • Plug-in I/O extension modules are available for front mezzanine
  • FPGA code loads from PCI-X bus or from flash memory
  • Other memory options available (call factory)
  • Supports dual DMA channel data transfer to CPU/bus
  • Support for Xilinx ChipScope™ Pro interface
  • Designed for conduction-cooled host card or -40 to 85°C operation in air-cooled systems

Additional information

Weight 16 oz
Dimensions 13 × 12 × 3 in
Part Number

PMC-SLX150: 256 x 64-bit dual-port SRAM, PMC-SLX150E: 256 x 64-bit dual-port SRAM, extended temp. range, PMC-SLX150-1M: 1M x 64-bit dual-port SRAM, PMC-SLX150E-1M: 1M x 64-bit dual-port SRAM, extended temp. range

FPGA Type

Xilinx Spartan-6

Product Series

Spartan-6 Series

Logic Cells

147K

  • Description

    Large, high-speed memory banks enable efficient data handling. The dual-port SRAM facilitates high-speed DMA transfers to the bus or CPU. A high-bandwidth PCI-X interface ensures fast data throughput. 64 I/O lines are accessible through the rear (J4) connector. Additional I/O processing is supported on a separate mezzanine card that plugs into the PMC FPGA base board. A variety of these external AXM I/O cards are available to interface your analog and digital I/O signals. Take advantage of the conduction-cooled design for use in hostile environments. Conduction efficiently dissipates heat if there is inadequate cooling air flow. Optional extended temperature models operate reliably from -40 to 85°C. Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board VHDL debugging.

    FPGA

    FPGA Device: Xilinx Spartan-6 FPGA. Model XC6SLX150-3FG676 FPGA with 147,433 logic cells and 180 DSP48A1 slices.

    FPGA Configuration: Download via PCI-X bus or flash memory.

    Example FPGA Program: VHDL provided for bus interface, front & rear I/O control, SRAM read/write interface logic, and SDRAM memory interface controller. See EDK kit.

    I/O Processing

    Acromag AXM I/O modules: AXM modules plug into the PMC module’s front mezzanine for additional I/O lines. Analog and digital I/O AXM modules are sold separately.

    Rear I/O: 64 I/O (32 LVDS) lines supported with a direct connection between the FPGA and the rear I/O connector (J4).

    Engineering Design Kit

    Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a PMC-SLX module (see www.acromag.com for more information).

    PMC Compliance

    Conforms to PCI Local Bus Specification, Revision 3.0 and CMC/PMC Specification, P1386.1.

    Electrical/Mechanical Interface: Single-Width Module.

    PCI Bus Modes: Supports PCI-X at 100MHz, 66MHz and Standard PCI at 66MHz and 33MHz

    PCI-X Master/Target: 32-bit or 64-bit interface

    Signaling: 3.3V compliant.

    Interrupts (INTA#): Interrupt A is used to request an interrupt.

    Environmental

    Operating Temperature: -0 to 70°C or -40 to 85°C (E versions).

    Storage Temperature: -55 to 125°C.

    Relative Humidity: 5 to 95% non-condensing.

    Power: 3.3V (±5%): 700mA typical, 840mA maximum; 5V (±5%): 1600mA typical, 2160mA maximum.

    MTBF: Contact the factory

    Watch: FPGA Computing for Speed and Flexibility

  • Features & Benefits

    • Reconfigurable Spartan-6 FPGA with 147,433 logic cells
    • PCI-X bus 100MHz 64-bit interface
    • 256k x 64-bit dual-port SRAM provides direct links from the PCI bus and to FPGA (optional 1M x 64-bit)
    • Supports both front and rear I/O connections
    • 64 I/O or 32 LVDS lines direct to FPGA via rear (J4) connector
    • Plug-in I/O extension modules are available for front mezzanine
    • FPGA code loads from PCI-X bus or from flash memory
    • Other memory options available (call factory)
    • Supports dual DMA channel data transfer to CPU/bus
    • Support for Xilinx ChipScope™ Pro interface
    • Designed for conduction-cooled host card or -40 to 85°C operation in air-cooled systems
  • Specs & Data Sheets

  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 13 × 12 × 3 in
    Part Number

    PMC-SLX150: 256 x 64-bit dual-port SRAM, PMC-SLX150E: 256 x 64-bit dual-port SRAM, extended temp. range, PMC-SLX150-1M: 1M x 64-bit dual-port SRAM, PMC-SLX150E-1M: 1M x 64-bit dual-port SRAM, extended temp. range

    FPGA Type

    Xilinx Spartan-6

    Product Series

    Spartan-6 Series

    Logic Cells

    147K