Click to zoom
$295
Clear
Product short description:
  • Holds one PMC module
  • Delivers power to PMC module
  • Enables a trouble-free start-up sequence
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

This PMC module carrier card allows use of a PMC module in an independent stand-alone mode. The carrier card delivers power to the PMC module and regulates the PCI bus start-up sequence to prevent a system lock-up by the connection to the local bus.

As a non-intelligent carrier, the board acts simply as an adapter to route signals to and from the PMC module. The user has full access to the field I/O via two 50-pin ribbon cable connectors.

Performance Specifications

PMC Compatibility

Pin assignment conforms to PCI Bus Specification, Revision 3.0.

Physical Configuration
Height: 3.300 inches (83820 mm).
Depth: 3.520 inches (89.408 mm).
Board Thickness: 0.063 inches (1.600 mm).
Unit Weight: 0.107 lbs. (0.053 kg).
Connectors: P1, P2 (Field I/O): 50-pin, ribbon cable, male receptacle headers.
P3: 4-pin power header.
P4: 14-pin Xilinx JTAG port.
J1 – J4: 64-pin PMC module connectors.

Environmental

Operating temperature: -40 to 85°C.
Storage temperature: -55 to 120°C.
Relative humidity: 5 to 95% non-condensing.
Power
+5V (±5%): 66mA, typical.
+12V (±10%): 0mA, used by PMC module only.
-12V (±10%): 0mA, used by PMC module only.”
Note that 3.3V is generated from the 5V supply. Power requirements do not include the PMC module. ±12.0V DC is optional based on user’s needs.

Isolation

Non-Isolated. PCI interface and field commons have a direct electrical connection.
MTBF: Contact the factory.

  • Single-slot PMC carrier card
  • Stand-alone design does not require expensive card cage or other computer chassis
  • Ideal for custom computing solutions based on configurable FPGA modules
  • On-board DC-DC converter provides +3.3V DC to the PMC module from a +5V power source
  • Users can optionally provide a ±12V DC source
  • Manual reset button initiates a PCI reset at user’s discretion
  • Voltage monitor designed to prevent code execution errors during power-up, power-down, or potential brown-out conditions when +5V DC supply dips too low
  • A standard 14-pin Xilinx JTAG connection is available for utilizing the TDI, TDO, TCK, and TMS signals
  • Front or rear connection I/O access

Manuals

APMC4110 User Manual (Log in to download the file)

Drawings & Diagrams

  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options

Additional information

Weight N/A
Part Number

5025-288: SCSI-3 cable connection to 68 screw terminals, 5028-378: SCSI-2 cable connection to 50 screw terminals, 5025-552: 50 screw terminals, ribbon cable connector

  • Description

    Screw terminal panels simplify field signal wiring. A cable connector provides a clean interface to the I/O board or module.

    Many termination panels have a compact footprint and mount neatly on a DIN rail strip. Other panels are designed for mounting directly onto a standard 19-inch computer rack.

    All of Acromag’s I/O boards have a corresponding termination panel. This convenience saves you the time and hassle of finding a compatible panel or crafting your own.

    For more information see modules user manual.

  • Features & Benefits

    • Single-slot PMC carrier card
    • Stand-alone design does not require expensive card cage or other computer chassis
    • Ideal for custom computing solutions based on configurable FPGA modules
    • On-board DC-DC converter provides +3.3V DC to the PMC module from a +5V power source
    • Users can optionally provide a ±12V DC source
    • Manual reset button initiates a PCI reset at user’s discretion
    • Voltage monitor designed to prevent code execution errors during power-up, power-down, or potential brown-out conditions when +5V DC supply dips too low
    • A standard 14-pin Xilinx JTAG connection is available for utilizing the TDI, TDO, TCK, and TMS signals
    • Front or rear connection I/O access
  • Specs & Data Sheets

    Manuals

    APMC4110 User Manual (Log in to download the file)

    Drawings & Diagrams

  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
  • Additional information

    Additional information

    Weight N/A
    Part Number

    5025-288: SCSI-3 cable connection to 68 screw terminals, 5028-378: SCSI-2 cable connection to 50 screw terminals, 5025-552: 50 screw terminals, ribbon cable connector