Click to zoom
$1,750$2,005
Clear
Product short description:
  • 16D/32SE channels, 16-bit A/D
  • 8 channels, 16-bit D/A
  • 16 TTL input/outputs
  • 32-bit counter/timer

PMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These high-density PMC modules perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Now you can conserve your precious PMC slots and still get all the I/O functionality you need. The PMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the PMC730 is still very budget-friendly. A conduction-cooled version is also available.

Specifications

Analog Input
Input configuration: 16 differential or 32 single-ended channels multiplexed to a single A/D converter.

A/D resolution: 16 bits.

Input ranges: ±3.3V, ±5V, ±10V, 0-5V, and 0-10V.

Maximum throughput rate:
One channel updated at a time.
1 channel (maximum): 10μS
16 channels (maximum): 160μS
32 channels (maximum): 320μS

Data sample memory: 512 samples shared by all channels.

A/D trigger: Internal timer, external source, software.

On-board timer: One user-programmable timer for analog input acquisition control.

System accuracy: ±3 LSB typ. (SW calib., gain=1, 25°C).

Data format: Straight binary or binary two’s compliment.

Input overvoltage protection: -40 to 55V power off.

Common mode rejection ratio (60Hz): 96dB typical.

Channel-to-channel rejection ratio (60Hz): 96dB typical.

Analog Output
Output configuration: 8 single-ended channels, each controlled by its own independent D/A converter.

D/A resolution: 16 bits.

Output range: ±10V.

Maximum throughput rate:
Outputs updated simultaneously or individually.
1 channel: 12.375μS
8 different channels: 12.375μS

DAC programming: Via independent channel registers or through shared FIFO.

Data sample memory: 1024 sample FIFO shared by all channels.

D/A trigger: Internal timer, external source, software.

On-board timer: One user-programmable timer for analog output control.

System accuracy: 0.0076% of 20V span max. error corrected (i.e. calibrated) at 25°C with output unloaded.

Data format: Straight binary.

Output at reset: 0V.

Output current: -10 to 10mA (maximum).

Short circuit protection: Indefinite at 25°C.

Digital I/O
I/O channel configuration: 16 TTL transceivers, input/ output direction selectable on an 8-channel basis.

Digital Input
Input voltage range: 0 to 5V DC.

Input signal threshold: Low to high: 2.0V typical. High to low: 0.8V typical.

Input response time: 250 nanoseconds.

Interrupts: 16 channels of interrupts for high-to-low, low-to-high, or any change-of-state event types.

Debounce: Individual debounce selectable on each channel. User-selectable (4μS, 64μS, 1mS, or 8mS).

Digital Output
Output voltage range: 0 to 5V DC.
Output ON current range: -15 to 64mA.
Output pullups: 4.7K ohm socketed resistors.

Counter/Timers
Counter/timer configuration: one 32-bit counter (requires use of channels 2 through 5 of digital I/O section).

Functions: Watchdog timer, event counting, pulse measurement, period measurement, output waveform generation (pulse width modulation, continuous pulse, single pulse, continuous waveform).

Internal clock: Programmable 1, 4, 8MHz.

External clock: 3.4MHz.

Input voltage range: 0 to 5V DC.

Output voltage range: 0 to 5V with 4.7 ohm pull-up.

Maximum of 0 to 35V with external supply.

PMC Compliance
Conforms to PCI Local Bus Specification, Revision 2.2 and CMC/PMC Specification, P1386.1.

4K Memory Space Required: One Base Address Register.

Signaling: 5V Compliant, 3.3V Tolerant.

Interrupts (INTA#): Interrupt A is used to request an interrupt.

Environmental
Operating temperature: 0 to 70°C (PMC730 / R) or -40 to 85°C (PMC730E / CC).

Storage temperature: -55 to 100°C.

Relative humidity: 5 to 95% non-condensing.

Power: 120mA at +5V. 95mA at +12V. 70mA at -12V.

MTBF: 929,541 hrs. at 25°C, MIL-HDBK-217F, notice 2.

  • 0 to 70°C (PMC730 / R) or -40 to 85°C (PMC730E / CC)
  • Analog Inputs
  • 16 differential or 32 single-ended inputs (±3.3V, ±5V, ±10V, 0-5V, and 0-10V ranges)
  • 16-bit ADC with 512 sample RAM
  • 10µS conversion time (100KHz)
  • Interrupt upon ADC memory threshold condition (user-programmable data sample threshold)
  • User-programmable interval timer
  • Analog Outputs
  • Eight analog output channels (±10V range)
  • Individual 16-bit DACs per channel
  • 1024 sample FIFO for waveform generation
  • 12.375µS settling time (80.8KHz throughput)
  • Interrupt on user-programmable FIFO threshold
  • Digital I/O & Counter/Timers
  • 16 TTL bidirectional input/outputs
  • One 32-bit counter/timer

Additional information

Weight 16 oz
Dimensions 12 × 13 × 3 in
Part Number

PMC730: front connector., PMC730CC: rear connector, extended temp. range, conduction-cooled., PMC730E: front connector, extended temp. range., PMC730R: rear connector.

  • Description

    Now you can conserve your precious PMC slots and still get all the I/O functionality you need. The PMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the PMC730 is still very budget-friendly. A conduction-cooled version is also available.

    Specifications

    Analog Input
    Input configuration: 16 differential or 32 single-ended channels multiplexed to a single A/D converter.

    A/D resolution: 16 bits.

    Input ranges: ±3.3V, ±5V, ±10V, 0-5V, and 0-10V.

    Maximum throughput rate:
    One channel updated at a time.
    1 channel (maximum): 10μS
    16 channels (maximum): 160μS
    32 channels (maximum): 320μS

    Data sample memory: 512 samples shared by all channels.

    A/D trigger: Internal timer, external source, software.

    On-board timer: One user-programmable timer for analog input acquisition control.

    System accuracy: ±3 LSB typ. (SW calib., gain=1, 25°C).

    Data format: Straight binary or binary two’s compliment.

    Input overvoltage protection: -40 to 55V power off.

    Common mode rejection ratio (60Hz): 96dB typical.

    Channel-to-channel rejection ratio (60Hz): 96dB typical.

    Analog Output
    Output configuration: 8 single-ended channels, each controlled by its own independent D/A converter.

    D/A resolution: 16 bits.

    Output range: ±10V.

    Maximum throughput rate:
    Outputs updated simultaneously or individually.
    1 channel: 12.375μS
    8 different channels: 12.375μS

    DAC programming: Via independent channel registers or through shared FIFO.

    Data sample memory: 1024 sample FIFO shared by all channels.

    D/A trigger: Internal timer, external source, software.

    On-board timer: One user-programmable timer for analog output control.

    System accuracy: 0.0076% of 20V span max. error corrected (i.e. calibrated) at 25°C with output unloaded.

    Data format: Straight binary.

    Output at reset: 0V.

    Output current: -10 to 10mA (maximum).

    Short circuit protection: Indefinite at 25°C.

    Digital I/O
    I/O channel configuration: 16 TTL transceivers, input/ output direction selectable on an 8-channel basis.

    Digital Input
    Input voltage range: 0 to 5V DC.

    Input signal threshold: Low to high: 2.0V typical. High to low: 0.8V typical.

    Input response time: 250 nanoseconds.

    Interrupts: 16 channels of interrupts for high-to-low, low-to-high, or any change-of-state event types.

    Debounce: Individual debounce selectable on each channel. User-selectable (4μS, 64μS, 1mS, or 8mS).

    Digital Output
    Output voltage range: 0 to 5V DC.
    Output ON current range: -15 to 64mA.
    Output pullups: 4.7K ohm socketed resistors.

    Counter/Timers
    Counter/timer configuration: one 32-bit counter (requires use of channels 2 through 5 of digital I/O section).

    Functions: Watchdog timer, event counting, pulse measurement, period measurement, output waveform generation (pulse width modulation, continuous pulse, single pulse, continuous waveform).

    Internal clock: Programmable 1, 4, 8MHz.

    External clock: 3.4MHz.

    Input voltage range: 0 to 5V DC.

    Output voltage range: 0 to 5V with 4.7 ohm pull-up.

    Maximum of 0 to 35V with external supply.

    PMC Compliance
    Conforms to PCI Local Bus Specification, Revision 2.2 and CMC/PMC Specification, P1386.1.

    4K Memory Space Required: One Base Address Register.

    Signaling: 5V Compliant, 3.3V Tolerant.

    Interrupts (INTA#): Interrupt A is used to request an interrupt.

    Environmental
    Operating temperature: 0 to 70°C (PMC730 / R) or -40 to 85°C (PMC730E / CC).

    Storage temperature: -55 to 100°C.

    Relative humidity: 5 to 95% non-condensing.

    Power: 120mA at +5V. 95mA at +12V. 70mA at -12V.

    MTBF: 929,541 hrs. at 25°C, MIL-HDBK-217F, notice 2.

  • Features & Benefits

    • 0 to 70°C (PMC730 / R) or -40 to 85°C (PMC730E / CC)
    • Analog Inputs
    • 16 differential or 32 single-ended inputs (±3.3V, ±5V, ±10V, 0-5V, and 0-10V ranges)
    • 16-bit ADC with 512 sample RAM
    • 10µS conversion time (100KHz)
    • Interrupt upon ADC memory threshold condition (user-programmable data sample threshold)
    • User-programmable interval timer
    • Analog Outputs
    • Eight analog output channels (±10V range)
    • Individual 16-bit DACs per channel
    • 1024 sample FIFO for waveform generation
    • 12.375µS settling time (80.8KHz throughput)
    • Interrupt on user-programmable FIFO threshold
    • Digital I/O & Counter/Timers
    • 16 TTL bidirectional input/outputs
    • One 32-bit counter/timer
  • Specs & Data Sheets

  • Additional information

    Additional information

    Weight 16 oz
    Dimensions 12 × 13 × 3 in
    Part Number

    PMC730: front connector., PMC730CC: rear connector, extended temp. range, conduction-cooled., PMC730E: front connector, extended temp. range., PMC730R: rear connector.