Click to zoom
$1,420

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • High-Speed Analog Input
  • Two Differential Channels
  • Two 16-bit A/D Channels
[DISPLAY_ULTIMATE_PLUS]

AXM Series extension modules offer numerous I/O options for Acromag’s PMC modules with configurable FPGAs. These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.

AXM-A30 Analog Input

This module features two 105MHz 16-bit A/D channels. An external clock and trigger can be used to control sampling.

An internal precision clock conditioner provides the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.

Each clock distribution block includes a programmable divider, a phase synchronization circuit, and a programmable delay. This allows multiple integer-related and phase-adjusted copies of the reference to be distributed to multiple system components.

Performance Specifications

AXM-A30 Analog Input

Input configuration: Two differential channels using two Analog Devices AD9460 A/D converter.
A/D resolution: 16 bits.
Input range: 3.4V peak-to-peak, centered at 0V, into a 50 ohm load.
External clock input: 3.3V peak-to-peak.
Input clock range: 1-105MHz.
Maximum throughput rate:  1 channel (max.): 9.5nS (105MHz). 2 channels (max.): 9.5nS (105MHz).
A/D trigger: External source, FPGA controlled.
Input clock controller: Precision clock conditioner combines the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.
Signal-to-noise ratio: 69dB (25°C) typical.
Signal-to-noise and distortion: 67dB (25°C) typical.
General purpose I/O: Low voltage TTL.

Physical

Acromag’s AXM Series extension modules offer numerous I/O options for Acromag’s PMC modules with configurable FPGA. These extension modules plug into the front mezzanine on Acromag’s PMC-LX/ SX (Virtex®-4 FPGA), and PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules. Analog and digital I/O AXM modules are sold separately.
Size: 11.5 mm high x 31.0 mm deep x 74.0 mm wide (0.453 inches x 1.220 inches x 2.913 inches).
Stacking height: 5.0 mm (0.197 inches).
Weight: 41.3 g (1.46 oz).
Connectors: Front field I/O: Four SMA PCB jack female receptacle connectors.
Complies with PMC Specification P1386.1 for a singlewidth PMC module when installed on a supported PMC module.

Environmental

Operating temperature: -0 to 70°C.
Storage temperature: -55 to 105°C.
Relative humidity: 5 to 95% non-condensing.
Power: 4.5 Watts typical.
MTBF: 1,972,542 hrs. at 25°C, MIL-HDBK-217F, Notice 2.

Analog Input

Note: XMC-7A and XMC-7K Series are not supported

  • Input configuration: Two differential channels using two Analog Devices AD9460 A/D converter.
  • A/D resolution: 16 bits.
  • Input range: 3.4V peak-to-peak, centered at 0V, into a 50 ohm load.
  • External clock input: 3.3V peak-to-peak.
  • Input clock range:1-105MHz.
  • Maximum throughput rate:
    • 1 channel (max.): 9.5nS (105MHz).
    • 2 channels (max.): 9.5nS (105MHz).
    • A/D trigger: External source, FPGA controlled.
  • Input clock controller:Precision clock conditioner combines the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.
  • Signal-to-noise ratio: 69dB (25°C) typical.
  • Signal-to noise and distortion: 67dB (25°C) typical.
  • General purpose I/O: Low voltage TTL
  • Operating temperature: 0 to 70°C
How to Reduce Costs with Customized I/O on COTS FPGA Modules Application Note
It is now common to deploy COTS FPGA modules to help speed development cycles and reduce overall project costs. However, to maximize savings when FPGAs are used to perform custom I/O functions, it is very important to first determine the suitability of a particular FPGA module for the application. This determination is dependent upon several factors: The...

Manuals

PMC-VFX70 Getting Started with AXM-A30 Guide (Log in to download the file)

AXM-A30 User Manual (Log in to download the file)

AXM-VFX EDK User Manual (Log in to download the file)

Drawings & Diagrams

  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.      
    $2,480
    Select options
  • Compare

    XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules

    • Logic-optimized Kintex-7 FPGA
    • XMC module with PCIe interface
    • Conduction-Cooled
    Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.          
    $5,175$7,005
    Select options
  • Compare

    XMC-7K F: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports

    • Kintex-7 FPGA with 325k or 410k logic cells
    • 10Gb Ethernet
    • PCIe & SFP +/Aurora interface
    Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial interface.    
    $5,175$7,005
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

AXM-A30: Two 16-bit 105MHz A/D channels.

  • Description

    AXM Series extension modules offer numerous I/O options for Acromag’s PMC modules with configurable FPGAs. These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.

    AXM-A30 Analog Input

    This module features two 105MHz 16-bit A/D channels. An external clock and trigger can be used to control sampling.

    An internal precision clock conditioner provides the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.

    Each clock distribution block includes a programmable divider, a phase synchronization circuit, and a programmable delay. This allows multiple integer-related and phase-adjusted copies of the reference to be distributed to multiple system components.

    Performance Specifications

    AXM-A30 Analog Input

    Input configuration: Two differential channels using two Analog Devices AD9460 A/D converter.
    A/D resolution: 16 bits.
    Input range: 3.4V peak-to-peak, centered at 0V, into a 50 ohm load.
    External clock input: 3.3V peak-to-peak.
    Input clock range: 1-105MHz.
    Maximum throughput rate:  1 channel (max.): 9.5nS (105MHz). 2 channels (max.): 9.5nS (105MHz).
    A/D trigger: External source, FPGA controlled.
    Input clock controller: Precision clock conditioner combines the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.
    Signal-to-noise ratio: 69dB (25°C) typical.
    Signal-to-noise and distortion: 67dB (25°C) typical.
    General purpose I/O: Low voltage TTL.

    Physical

    Acromag’s AXM Series extension modules offer numerous I/O options for Acromag’s PMC modules with configurable FPGA. These extension modules plug into the front mezzanine on Acromag’s PMC-LX/ SX (Virtex®-4 FPGA), and PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules. Analog and digital I/O AXM modules are sold separately.
    Size: 11.5 mm high x 31.0 mm deep x 74.0 mm wide (0.453 inches x 1.220 inches x 2.913 inches).
    Stacking height: 5.0 mm (0.197 inches).
    Weight: 41.3 g (1.46 oz).
    Connectors: Front field I/O: Four SMA PCB jack female receptacle connectors.
    Complies with PMC Specification P1386.1 for a singlewidth PMC module when installed on a supported PMC module.

    Environmental

    Operating temperature: -0 to 70°C.
    Storage temperature: -55 to 105°C.
    Relative humidity: 5 to 95% non-condensing.
    Power: 4.5 Watts typical.
    MTBF: 1,972,542 hrs. at 25°C, MIL-HDBK-217F, Notice 2.

  • Features & Benefits

    Analog Input

    Note: XMC-7A and XMC-7K Series are not supported

    • Input configuration: Two differential channels using two Analog Devices AD9460 A/D converter.
    • A/D resolution: 16 bits.
    • Input range: 3.4V peak-to-peak, centered at 0V, into a 50 ohm load.
    • External clock input: 3.3V peak-to-peak.
    • Input clock range:1-105MHz.
    • Maximum throughput rate:
      • 1 channel (max.): 9.5nS (105MHz).
      • 2 channels (max.): 9.5nS (105MHz).
      • A/D trigger: External source, FPGA controlled.
    • Input clock controller:Precision clock conditioner combines the functions of jitter cleaning/reconditioning, multiplication, and distribution of a reference clock.
    • Signal-to-noise ratio: 69dB (25°C) typical.
    • Signal-to noise and distortion: 67dB (25°C) typical.
    • General purpose I/O: Low voltage TTL
    • Operating temperature: 0 to 70°C
  • Tech Papers

    How to Reduce Costs with Customized I/O on COTS FPGA Modules Application Note
    It is now common to deploy COTS FPGA modules to help speed development cycles and reduce overall project costs. However, to maximize savings when FPGAs are used to perform custom I/O functions, it is very important to first determine the suitability of a particular FPGA module for the application. This determination is dependent upon several factors: The...
  • Specs & Data Sheets

    Manuals

    PMC-VFX70 Getting Started with AXM-A30 Guide (Log in to download the file)

    AXM-A30 User Manual (Log in to download the file)

    AXM-VFX EDK User Manual (Log in to download the file)

    Drawings & Diagrams

  • Accessories

    • Compare

      XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

      • Logic-optimized Artix-7 FPGA
      • XMC module with PCIe interface
      • I/O Extension Mezzanine Modules
      Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.      
      $2,480
      Select options
    • Compare

      XMC-7K CC: User-Configurable Conduction-Cooled Kintex-7 FPGA Modules

      • Logic-optimized Kintex-7 FPGA
      • XMC module with PCIe interface
      • Conduction-Cooled
      Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.          
      $5,175$7,005
      Select options
    • Compare

      XMC-7K F: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports

      • Kintex-7 FPGA with 325k or 410k logic cells
      • 10Gb Ethernet
      • PCIe & SFP +/Aurora interface
      Acromag’s XMC-7K modules feature a high-performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high-throughput serial interface.    
      $5,175$7,005
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    AXM-A30: Two 16-bit 105MHz A/D channels.