Click to zoom
$520$650
Clear
Product short description:
  • Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
  • 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 921.6bps)
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

These modules provide eight asynchronous serial communication ports from a single IP carrier slot. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity.

For more efficient data processing, each serial port is equipped with 64-character FIFO buffers on the transmit and receive lines.

The data ports generate individually controlled transmit, receive, line status, data set, and flow control interrupts. Since unique interrupt vectors may be assigned to each port, it is easy for you to identify and locate the interrupt source. Also, a priority shifting scheme prevents continuous interrupts from one port from blocking interrupts from another.

Specifications

RS422B Serial Ports

Configuration: Independent, non-isolated serial ports with a common single return connection.
Data rate: 921.6K bits/second, maximum.
Max. cable length: 1200 meters (4000 feet), typical.
Character size: 5 to 8 bits, software-programmable.
Parity: Odd, even, or no parity; software-programmable.
Stop bits: 1, 1-1/2, or 2 bits; software-programmable.
Data register buffers: Double buered or 64-byte FIFO buffered, mode selectable.
Interrupts: Receiver line status (overrun, parity, framing error, or break interrupt); receive/transmit FIFO level reached or character time-out; Xon/Xoff or special character detected.

IP Compliance (ANSI/VITA-4)

Meets IP specifications per ANSI/VITA-4 1995.
IP data transfer cycle types supported:
Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 0 wait state (250nS cycle).
Channel register read/write: 1 wait state (375nS cycle).
Interrupt register read/write: 2 wait states (500nS cycle).

Environmental

Operating temperature: 0 to 70°C (IP521-64) or -40 to 85°C (IP521-64E/5028-xE).
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: +5V (±5%): 340mA maximum.
MTBF: 3,532,745 hrs at 25°C, MIL-HDBK-217F, Notice 2.

  • Eight asynchronous, full duplex EIA/TIA-422B serial ports (supports EIA-485)
  • 64-byte transmit FIFO buffers, 64-byte receive FIFO buffers
  • Interrupts with unique vectors for each port
  • Programmable baud rate (up to 921.6Kbps)
  • Line-break and false start-bit detection
  • Failsafe receivers
  • Socketed termination and bias resistors
  • Industry-standard 16C654 family UART includes software-compatible 16C450 mode
  • 0 to 70°C (IP521-64) or -40 to 85°C (IP521-64E/5028-xE)
  • High-density design lowers per-port costs and saves IP carrier card slots for other functions
  • 64-byte FIFO buffers minimize CPU interaction for improved system performance
  • Extended temperature ranges deliver dependable operation in extreme conditions
IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $75$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $220$890
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module
    Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • Eight asynchronous, full duplex EIA/TIA-422B serial ports (supports EIA-485)
    • 64-byte transmit FIFO buffers, 64-byte receive FIFO buffers
    • Interrupts with unique vectors for each port
    • Programmable baud rate (up to 921.6Kbps)
    • Line-break and false start-bit detection
    • Failsafe receivers
    • Socketed termination and bias resistors
    • Industry-standard 16C654 family UART includes software-compatible 16C450 mode
    • 0 to 70°C (IP521-64) or -40 to 85°C (IP521-64E/5028-xE)
    • High-density design lowers per-port costs and saves IP carrier card slots for other functions
    • 64-byte FIFO buffers minimize CPU interaction for improved system performance
    • Extended temperature ranges deliver dependable operation in extreme conditions
  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $75$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $220$890
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814