Click to zoom
$580$600
Clear
Product short description:
  • Four asynchronous EIA-485 isolated serial ports
  • 16 or 64-byte FIFO buffers
  • Interrupt support
  • Programmable baud rate (up to 512Kbps)
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

IP512 Industrial I/O Pack (IP) modules provide an isolated, high-performance serial communication interface for your computer.

Large FIFO buffers on the transmit and receive lines of each serial port enable more efficient data processing. When the buffer is full, an interrupt is sent to the CPU to read the data. To match your budget and performance requirements, you can order 16 or 64-byte (IP512-16/64) buffers.

Specifications

Serial Ports

Configuration: 4 independent, isolated, RS485 ports.
Interface: Asynchronous serial only.
Data rate: Programmable to 512K bits/second using internal baud rate generator.
Character size: Programmable 5-8 bits.
Parity: Programmable odd, even, or no parity.
Stop bits: Programmable 1, 1-1/2, or 2 bits.
Data register buffers: Double-buffered (16C450 mode) or 16/64-byte FIFO buffered.
Interrupts: Receiver Line Status, Received Data Available or Character Timeout, Transmitter Holding Register Empty.
Receiver input resistance: 12K ohms minimum.
Differential input threshold: ±0.2V.
Bias resistors: 560 ohms pull-ups.
Output short circuit current: 250mA maximum.
Termination resistors 120 ohms. Installed in board sockets (removable).
Port power requirements: Isolated +5V ±5%, 15mA maximum, each port.
Maximum cable length: 1200m (4000 ft.).

UART

IP512-16: Texas Inst. TL16C554FN or equivalent.
IP512-64: Startech ST16C654CJ68.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported:
Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 1 wait state (375nS cycle).
I/O register read/write: 2 wait states (500nS cycle)
Interrupt select read: 2 wait states (500nS cycle).

Environmental

Operating temperature: 0 to 70°C
Storage temperature: -40 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power:
+5V (±5%): 160mA maximum.
±12V (±5%): 0mA (not used).
MTBF: Consult factory.

  • Four asynchronous EIA-485 serial ports
  • Isolated serial ports
  • 16 or 64-byte FIFO buffers
  • Software-programmable baud rate (up to 512Kbps)
  • Individually controlled interrupts (unique vectors for each port)
  • Line break generation and detection
  • False start bit detection
  • Industry-standard 16C550 UART including software compatible 16C450 mode
  • 0 to 70°C
  • Isolation protects computer system from ground loops and transient signals
  • FIFO buffers minimize CPU interaction for more efficient data processing
  • Internal diagnostics help detect communication faults
  • Priority shifting scheme prevents continuous interrupts from blocking other ports
IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $220$890
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module
    Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • Four asynchronous EIA-485 serial ports
    • Isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Software-programmable baud rate (up to 512Kbps)
    • Individually controlled interrupts (unique vectors for each port)
    • Line break generation and detection
    • False start bit detection
    • Industry-standard 16C550 UART including software compatible 16C450 mode
    • 0 to 70°C
    • Isolation protects computer system from ground loops and transient signals
    • FIFO buffers minimize CPU interaction for more efficient data processing
    • Internal diagnostics help detect communication faults
    • Priority shifting scheme prevents continuous interrupts from blocking other ports
  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $220$890
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814