Click to zoom
$1,360$1,490
Clear
Product short description:
  • 16 differential or 32 single-ended input channels
  • 200KHz throughput
  • 5µS/conversion
  • Selectable input range (±5V, ±10V, 0-5V, 0-10V)
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.

The IP330A has many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.

“Mailbox” memory allows the CPU to read the latest data in 32 storage buffer registers without interrupting the A/D converter.

The IP330A is a drop-in replacement for the IP330, please see the known differences document below for more information.
Known differences between the IP330 and the IP330A statement

Analog Inputs

Input configuration: 16 differential or 32 single-ended.
A/D resolution: 16 bits.
Input ranges: ±5V, ±10V*, 0-5V, and 0-10V*. * Requires ±15V external supplies.
Data sample memory: Individual channel mailbox with one or two storage buffer registers per channel.
Maximum throughput rate:
Only one channel can be updated at a time.
One channel: 200KHz maximum (5μS/conversion) [66KHz (15μS/conversion) recommended] 16 channels (differential): 4.2KHz (240μS/16 ch) 32 channels (single-ended): 2.1KHz (480μS/32 ch).
Programmable gains: 1x, 2x, 4x, 8x.
A/D triggers: External and software.
System accuracy: 2 LSB (0.0030%) typical (SW calib., gain=1, 25°C).
Data format: Straight binary or two’s compliment.
Input overvoltage protection: Vss -20V to Vdd 40V with power on, -35V to 55V power off.
Common mode rejection ratio (60Hz): 96dB typical.
Channel-to-channel rejection ratio (60Hz): 96dB typical.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz clock):
ID PROM read: 1 wait state (375ns cycle).
I/O space read/write: 1 wait states.
Interrupt select cycle read: 1 wait state.
Mailbox I/O read: 1 wait state. 3 wait states if ongoing internal mail box write.

Environmental

Operating temperature: 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model).
Storage temperature: -55 to 100°C.
Relative humidity: 5 to 95% non-condensing.
MTBF: Consult factory.
Power:
+5V: 65mA typical, 200mA maximum.
+12V: 14mA typical, 20mA maximum.
-12V/-15V: 11mA typical,15mA maximum.

  • “Mailbox” memory eliminates scanning interruptions for optimum throughput.
  • Data register indicates new and missed (overwritten) data values in the mailbox.
  • Programmable interrupts simplify data acquisition by providing greater control.
  • 16-bit A/D converter (ADC)
  • 5µS conversion time (200KHz)
  • 16 differential or 32 single-ended inputs (±5V, ±10V, 0-5V, and 0-10V input ranges)
  • Individual channel mailbox with one or two storage buffer registers per channel
  • Programmable scan control
  • Four scanning modes
  • User-programmable interval timer
  • External trigger input and output
  • Programmable gain for individual channels
  • Post-conversion interrupts
  • 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model)

Manuals

IP330A User Manual (Log in to download the file)

Known Difference Between IP330 and the IP330A (Log in to download the file)

Drawings & Diagrams

IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $220$890
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module
    Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • “Mailbox” memory eliminates scanning interruptions for optimum throughput.
    • Data register indicates new and missed (overwritten) data values in the mailbox.
    • Programmable interrupts simplify data acquisition by providing greater control.
    • 16-bit A/D converter (ADC)
    • 5µS conversion time (200KHz)
    • 16 differential or 32 single-ended inputs (±5V, ±10V, 0-5V, and 0-10V input ranges)
    • Individual channel mailbox with one or two storage buffer registers per channel
    • Programmable scan control
    • Four scanning modes
    • User-programmable interval timer
    • External trigger input and output
    • Programmable gain for individual channels
    • Post-conversion interrupts
    • 0 to 70°C (IP330A) or -40 to 85°C (IP330AE model)
  • Specs & Data Sheets

    Manuals

    IP330A User Manual (Log in to download the file)

    Known Difference Between IP330 and the IP330A (Log in to download the file)

    Drawings & Diagrams

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $220$890
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814