Click to zoom
$565$700
Clear
Product short description:
  • 32 port-isolated output channels (bipolar solid state relays)
  • ±60V AC/DC output
  • High/low-side switch configuration
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.

A major IP445A advantage is its flexibility. The module supports wide range bipolar (AC or DC) voltage switching. Each port can be configured for high or low-side switches. The outputs are TTL-compatible when configured as low-side switches using on-board socketed pull-up resistors.

Isolation protects your computer system from noise, transient signals, and field wiring faults. Outputs are grouped into four 8-channel ports. Ports are isolated via solid-state relays from the logic and from each other.

Readback buffers simplify output status monitoring. And for easy closed-loop monitoring of critical control signals, use the IP445A with an IP440A input module.

The IP445A is a drop-in replacement for the IP445, please see the known differences document below for more information.
Known Differences Between the IP445 and the IP445A Statement

Specifications

Digital Outputs: Output channel configuration: 32 isolated solid-state relays support AC or DC (high/low-side switching) operation.
Isolation: Logic and field connections are optically isolated by solid-state relays. Individual ports are also isolated from each other. Output lines of an individual port share a common connection and are not isolated from each other. IP Logic and field lines are isolated from each other for voltages up to 250V AC or 354V DC on a continuous basis (unit will withstand a 1000V AC  dielectric strength test for one minute without breakdown).
Voltage range: 0 to ±60V DC or peak AC.
Output ON current range: 140mA maximum continuous (up to 1A total per port).
Turn on time: IP445A 1mS typical, 2mS maximum. IP445AE 1mS typical, 2.5mS maximum*.
Turn off time: IP445A 1mS typical, 2mS maximum. IP445AE 1mS typical, 2.5mS maximum*.
*maximum values are measured at 85°C
Output pull-up resistors: 4.7K ohms, socketed.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*).
Access times (8MHz clock): 0 wait states (250ns cycle).
Updates: Requires four 8-bit writes to update all channels.

Environmental

Operating temperature: 0 to 70°C (IP445A) or -40 to 85°C (IP445AE model).
Storage temperature: -40 to 150°C (all models).
Relative humidity: 5 to 95% non-condensing.
MTBF: 713,455 hrs at 25°C, MIL-HDBK-217F, Notice 2.
Power: +5V (±5%) all outputs on: 200mA maximum. ±5V (±5%) all outputs off: 8mA maximum.

  • Unique ground reference points for each port permits AC and DC switching on one module.
  • Pin are compatible with IP440A input module for loopback monitoring.
  • 32 bipolar solid state relays
  • High/low-side switch configuration
  • Port-isolated output channels
  • ±60V AC/DC voltage range
  • High speed processing (0 wait states)
  • TTL-compatible
  • Failsafe power-up and system reset
  • Output readback function
  • Socketed pull-up resistors for low-side switching applications
  • Current-limited solid-state relays
  • 0 to 70°C (IP445) or -40 to 85°C (IP445E model)

Manuals

IP445A User Manual (Log in to download the file)

Known Difference Between IP445 and IP445A (Log in to download the file)

Drawings & Diagrams

IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $220$890
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module
    Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • Unique ground reference points for each port permits AC and DC switching on one module.
    • Pin are compatible with IP440A input module for loopback monitoring.
    • 32 bipolar solid state relays
    • High/low-side switch configuration
    • Port-isolated output channels
    • ±60V AC/DC voltage range
    • High speed processing (0 wait states)
    • TTL-compatible
    • Failsafe power-up and system reset
    • Output readback function
    • Socketed pull-up resistors for low-side switching applications
    • Current-limited solid-state relays
    • 0 to 70°C (IP445) or -40 to 85°C (IP445E model)
  • Specs & Data Sheets

    Manuals

    IP445A User Manual (Log in to download the file)

    Known Difference Between IP445 and IP445A (Log in to download the file)

    Drawings & Diagrams

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $220$890
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814