Click to zoom
$745$950
Clear
Product short description:
  • Ten 16-bit-TTL (482)
  • Five 16-bit-TTL and two 16-bit-RS422 (483)
  • Five 16-bit-RS422 counter/timer channels (484)
  • 8 or 32MHz clock time base
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Several models with a variety of configurations provide up to ten counter/timer channels for counting events, generating waveform control signals, measuring pulse-widths or periodic rates, and monitoring operations.

Support for internal or external triggering simplifies the synchronization of operations to specific events. Counter functions can use internally generated clocks or an externally supplied clock.

Benefits

  • Most configuration is handled by a single register which minimizes programming.
  • Pullups are socketed for easy adjustment

Specifications

Counter/Timers

Counter/timer configuration:
IP482: Ten 16-bit counters – TTL
IP483: Five 16-bit counters – TTL; Two 16-bit counters – RS422
IP484: Five 16-bit counters – RS422

Clock frequency: 8 or 32MHz depending on IP bus speed.

Field I/O: Front panel SCSI-3 connector.

8MHz carrier operation:
Selectable internal clock frequency: 0.5, 1, 2, 4, or 8 MHz.
External clock: 2MHz maximum frequency.
Minimum input event: 125nS.
Minimum pulse measurement: 125nS.
Minimum period measurement: 300nS.
Minimum gate/trigger pulse: 125nS.

32MHz carrier operation:
Selectable internal clock frequency: 2, 4, 8, 16, or 32 MHz.
External clock: 8MHz maximum frequency.
Minimum input event: 31.25nS.
Minimum pulse measurement: 31.25nS.
Minimum period measurement: 150nS.
Minimum gate/trigger pulse: 31.25nS.

Mode accuracy (with external clocking):
Waveform generation: Period is ±62nS.
Watchdog: Timeout occurs within ±1 clock cycle.
Pulse/period measurement: ±1 clock cycle.
Interrupts: Supported for watchdog timer time-out, event count complete, pulse width or periodic rate measurement complete, pulse wave complete (one-shot mode), successive waveform generation (continuous).
Triggering/gate: Programmable via register write or external trigger. Minimum pulse width 125nS. Line may be used for gating of counter.
Counter trigger: Interface for triggering counter functions. Input level is TTL or RS422 differential digital.
Counter input: Interface for events and pulse/period measurements. Also triggers load of watchdog timer register. Level is TTL or RS422 differential digital.
TTL compatibility: VIH = 2.0V and VIL = 0.8V. inputs are buffered and include 4.7K pull-ups to +5V.
Counter output: Level is TTL or RS422 differential digital.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTSel*).
Access times (8MHz or 32MHz clock):
ID space read: 0 wait states (250ns cycle).
Registers read/write: 1 wait states (500ns cycle).
Interrupt read/write: 0 wait states (250ns cycle).

Environmental

Operating temp.: 0 to 70°C or -40 to 85°C (E versions)
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: Consult factory.
MTBF: Hours at 25°C, MIL-HDBK-217F,Notice 2 IP482 2,043,105; IP483 3,289,625; IP484 7,065,540

  • Up to ten 16-bit counter/timers (IP482)
  • Available with both TTL and RS422 driver interface (IP483 only)
  • 8 or 32MHz clock time base
  • Single counter/timer modes:
    • Event counting
    • Frequency measurement
    • Period/pulse-width measurement
    • Quadrature position measurement
    • Square wave/pulse train generation
    • Time/period interrupter
    • Pulse width generation
  • 0 to 70°C or -40 to 85°C (E versions)

Manuals

IP482 User Manual (Log in to download the file)

IP483 User Manual (Log in to download the file)

IP484 User Manual (Log in to download the file)

IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $220$890
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module
    Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • Up to ten 16-bit counter/timers (IP482)
    • Available with both TTL and RS422 driver interface (IP483 only)
    • 8 or 32MHz clock time base
    • Single counter/timer modes:
      • Event counting
      • Frequency measurement
      • Period/pulse-width measurement
      • Quadrature position measurement
      • Square wave/pulse train generation
      • Time/period interrupter
      • Pulse width generation
    • 0 to 70°C or -40 to 85°C (E versions)
  • Specs & Data Sheets

    Manuals

    IP482 User Manual (Log in to download the file)

    IP483 User Manual (Log in to download the file)

    IP484 User Manual (Log in to download the file)

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $220$890
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814