VPX4821A: VPX Carrier Cards for XMC or PMC Modules
Product short description:
- Air-cooled and conduction-cooled versions
- 6U dual PMC/XMC slots
- PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system.
Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system.
Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
The PMC site uses 32/64-bit, PLX technology with a PCIe to PCI-X bridge; while the XMC site enables rapid data throughput with its use of an 8-lane PCIe Gen 2 interface. These sites support front or rear panel I/O.
By inserting PMC or XMC industrial I/O and configurable FPGA modules, developers can now leverage hundreds of available functions currently unavailable in a VPX platform.
These carriers are ideal for high-performance industrial, defense, scientific research, and telephony systems requiring high-speed I/O expansion. The VPX4821A is available in two versions: air-cooled and conduction-cooled.
The VPX4821A is one member of a family of 3U and 6U OpenVPX mezzanine carrier cards that support a simple and cost-effective solution for interfacing XMC or PMC modules to OpenVPX computer systems.
Performance Specifications for VPX4821A VPX Carrier
General
Form Factor: 6U VPX bus 6.299” (160mm) x 9.173” (233.0mm).
Pitch: VPX4821A (air-cooled): 1.0” pitch. VPX4821A-CC (conduction-cooled): 0.81” pitch.
Front Panel: The VPX4821A-XX-LF has a 1.0” VITA 48.1 front panel. Contact the factory for IEEE 1101.10 1.0” and 0.8” options.
VPX Carrier Interface: Compatible VITA 65 module / slot profiles:
Data Plane PCIe Gen 1: MOD6-PER-4F-12.3.1-2, MOD6-PER-2F-12.3.2-1, MOD6-PER-1U-12.3.3-1, MOD6-PER-1F-12.3.4-1
Data Plane PCIe Gen 2:MOD6-PER-4F-12.3.1-3, MOD6-PER-2F-12.3.2-2, MOD6-PER-1U-12.3.3-2, MOD6-PER-1F-12.3.4-2
Note 1: Board is compatible with payload profiles but has no hosting capabilities.
FRU EEPROM with temperature monitor.
PMC/XMC Interface: Two IEEE 1386-2001 PMC/XMC modules in a single VPX slot.
PMC site is PCI-X 2.0 compliant, 32/64-bit, 33/66/133MHz, up to 1GB/s.
XMC site is PCIe Gen 2 and 8 lanes wide.
Front panel I/O support for the PMC/XMC site with 32 differential pairs (air cooled only).
Rear I/O support for the PMC site with 64 I/O lines.
Rear I/O support for XMC site with 20 differential pairs.
VITA 46.9 compliance: Slot 1 rear I/O map is P3w1-P64s+P4w1-X12d+X8d. Slot 2 rear I/O map is P5w1-P64s+P6w1-X12d+X8d.
Power
Power Requirements:
+5V DC (0 to 70°C): 8A maximum generated from +12V supply.
+5V DC (-40 to 85°C): 5A maximum generated from +12V supply.
+3.3V DC (0 to 70°C): 8A maximum generated from +12V supply.
+3.3V DC (-40 to 85°C): 5A maximum generated from +12V supply.
+3.3V Aux DC: 5mA typical.
+12V DC and –12V DC provided to PMC site from VPX backplane.
+12V DC: Backplane voltage provided to XMC.
±12V Aux DC.
Note: see manual for further information.
Environmental
Air-Cooled Operating Temperature: 0 to 70°C (air flow requirement as measured to be greater than 200 LFM).
Conduction-Cooled Operating Temperature Range: -40 to 85°C (board must operate in a fully-installed conduction-cooled rack).
Storage Temperature Range: -55 to 100°C.
Relative Humidity: 5 to 95% non-condensing.
Weight: VPX4821A-XX-LF: 1.25 lbs (0.5669kb). VPX4821A-XX-CC-LF: 1.5 lbs (0.680kg)
Dimensions: Length: 10in, Height: 6.5in, Width: 1in
- Connects to OpenVPX™ via Data plane
- Support for upstream/downstream
- Optional backplane configuration for one 16-lane port, two 8-lane ports, or four 4-lane ports
- Supports dual standard (IEEE 1386.1) PMC/XMC modules with 25W mezzanine sites
- PMC site uses 32/64-bit, 33/66/133MHz PLX technology with a PCIe to PCI-X bridge
- Supports 64-bits of PMC I/O including differential routing to backplace per pattern “P64s” of VITA 46.9
- 5V tolerant with respect to PMC connectors
- XMC site uses PCIe x8 Gen 1 or 2 interface
- Supports 40-bits (20 pairs) of XMC I/O to backplane per pattern “X12d+X8d” of VITA 46.9
- Conforms to VITA 46.0, 46.4, 46.9
- Supports front or rear panel PMC/XMC I/O
- ±12V AUX power to PMC/XMC site
- Monitors FRU information and module temperature
Specs & Catalogs
Manuals
VPX4821A User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
Additional information
Weight | N/A |
---|---|
Dimensions | 10 × 7 × 1 in |
Part Number | VPX4821A-42-LF: Air-cooled carrier, Data Plane with VITA 42, VPX4821A-42-CC-LF: Conduction-cooled carrier, Data Plane with VITA 42, VPX4821A-61-LF: Air-cooled carrier, Data Plane with VITA 61, VPX4821A-61-CC-LF: Conduction-cooled carrier, Data Plane with VITA 61 |
-
Description
The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system.
Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
The PMC site uses 32/64-bit, PLX technology with a PCIe to PCI-X bridge; while the XMC site enables rapid data throughput with its use of an 8-lane PCIe Gen 2 interface. These sites support front or rear panel I/O.
By inserting PMC or XMC industrial I/O and configurable FPGA modules, developers can now leverage hundreds of available functions currently unavailable in a VPX platform.
These carriers are ideal for high-performance industrial, defense, scientific research, and telephony systems requiring high-speed I/O expansion. The VPX4821A is available in two versions: air-cooled and conduction-cooled.
The VPX4821A is one member of a family of 3U and 6U OpenVPX mezzanine carrier cards that support a simple and cost-effective solution for interfacing XMC or PMC modules to OpenVPX computer systems.
Performance Specifications for VPX4821A VPX Carrier
General
Form Factor: 6U VPX bus 6.299” (160mm) x 9.173” (233.0mm).
Pitch: VPX4821A (air-cooled): 1.0” pitch. VPX4821A-CC (conduction-cooled): 0.81” pitch.
Front Panel: The VPX4821A-XX-LF has a 1.0” VITA 48.1 front panel. Contact the factory for IEEE 1101.10 1.0” and 0.8” options.
VPX Carrier Interface: Compatible VITA 65 module / slot profiles:
Data Plane PCIe Gen 1: MOD6-PER-4F-12.3.1-2, MOD6-PER-2F-12.3.2-1, MOD6-PER-1U-12.3.3-1, MOD6-PER-1F-12.3.4-1
Data Plane PCIe Gen 2:MOD6-PER-4F-12.3.1-3, MOD6-PER-2F-12.3.2-2, MOD6-PER-1U-12.3.3-2, MOD6-PER-1F-12.3.4-2
Note 1: Board is compatible with payload profiles but has no hosting capabilities.
FRU EEPROM with temperature monitor.
PMC/XMC Interface: Two IEEE 1386-2001 PMC/XMC modules in a single VPX slot.
PMC site is PCI-X 2.0 compliant, 32/64-bit, 33/66/133MHz, up to 1GB/s.
XMC site is PCIe Gen 2 and 8 lanes wide.
Front panel I/O support for the PMC/XMC site with 32 differential pairs (air cooled only).
Rear I/O support for the PMC site with 64 I/O lines.
Rear I/O support for XMC site with 20 differential pairs.
VITA 46.9 compliance: Slot 1 rear I/O map is P3w1-P64s+P4w1-X12d+X8d. Slot 2 rear I/O map is P5w1-P64s+P6w1-X12d+X8d.Power
Power Requirements:
+5V DC (0 to 70°C): 8A maximum generated from +12V supply.
+5V DC (-40 to 85°C): 5A maximum generated from +12V supply.
+3.3V DC (0 to 70°C): 8A maximum generated from +12V supply.
+3.3V DC (-40 to 85°C): 5A maximum generated from +12V supply.
+3.3V Aux DC: 5mA typical.
+12V DC and –12V DC provided to PMC site from VPX backplane.
+12V DC: Backplane voltage provided to XMC.
±12V Aux DC.
Note: see manual for further information.Environmental
Air-Cooled Operating Temperature: 0 to 70°C (air flow requirement as measured to be greater than 200 LFM).
Conduction-Cooled Operating Temperature Range: -40 to 85°C (board must operate in a fully-installed conduction-cooled rack).
Storage Temperature Range: -55 to 100°C.
Relative Humidity: 5 to 95% non-condensing.
Weight: VPX4821A-XX-LF: 1.25 lbs (0.5669kb). VPX4821A-XX-CC-LF: 1.5 lbs (0.680kg)
Dimensions: Length: 10in, Height: 6.5in, Width: 1in -
Features & Benefits
- Connects to OpenVPX™ via Data plane
- Support for upstream/downstream
- Optional backplane configuration for one 16-lane port, two 8-lane ports, or four 4-lane ports
- Supports dual standard (IEEE 1386.1) PMC/XMC modules with 25W mezzanine sites
- PMC site uses 32/64-bit, 33/66/133MHz PLX technology with a PCIe to PCI-X bridge
- Supports 64-bits of PMC I/O including differential routing to backplace per pattern “P64s” of VITA 46.9
- 5V tolerant with respect to PMC connectors
- XMC site uses PCIe x8 Gen 1 or 2 interface
- Supports 40-bits (20 pairs) of XMC I/O to backplane per pattern “X12d+X8d” of VITA 46.9
- Conforms to VITA 46.0, 46.4, 46.9
- Supports front or rear panel PMC/XMC I/O
- ±12V AUX power to PMC/XMC site
- Monitors FRU information and module temperature
-
Tech Papers
WHITEPAPER: Introduction to VPX Technology (Log in to view the file)Introduction to VPX Technology VITA 46, 48, and 65: The Next Generation VME System Replacement VPX (also known as VITA 46) is the next generation of ruggedized compact embedded systems. After years of VME systems dominating the military/aerospace field, users have finally reached the limit of available bandwidth on the VMEbus. VPX expands the possible... -
Specs & Data Sheets
Specs & Catalogs
Manuals
VPX4821A User Manual (Log in to download the file)
Catalogs
Drawings & Diagrams
-
Additional information
Additional information
Weight N/A Dimensions 10 × 7 × 1 in Part Number VPX4821A-42-LF: Air-cooled carrier, Data Plane with VITA 42, VPX4821A-42-CC-LF: Conduction-cooled carrier, Data Plane with VITA 42, VPX4821A-61-LF: Air-cooled carrier, Data Plane with VITA 61, VPX4821A-61-CC-LF: Conduction-cooled carrier, Data Plane with VITA 61
Please login to submit this form.