Click to zoom
$1,295$1,995
Clear
Product short description:
  • PCIe bus 8-lane Gen 1 or 2 interface
  • Supports standard XMC modules (IEEE 1386.1)
  • Supports front or rear panel XMC I/O
  • Air-cooled, conduction-cooled, REDI versions

These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector. Industrial I/O and configurable FPGA modules from Acromag or other vendors are supported.

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The VPX4812 can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8.

The VPX4814 is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress CPU.
These carriers are ideal for high-performance industrial, defense, scientific research, and telephony systems requiring high-speed I/O expansion. The VPX4812 and VPX4814 is available in three versions: air-cooled, conduction-cooled and a Ruggedized Enhanced Design Implementation (REDI VITA 48).

Performance Specifications

General

Form Factor: 3U VPX bus 6.3” (160mm) x 3.94” (100.0mm).

Front Panel: The VPX4821-LF has a 1.0” VITA 48.1 front panel. Contact the factory for IEEE 1101.10 1.0” and 0.8” options.

Bus Compliance: VITA 46.0, 46.4, 46.9, 48 and 65. | MIL Spec 217-F @ 105,000 hours.

VPX Carrier Interface

VPX4812: Compatible VITA 65 module / slot profiles: MOD3-SWH-4F-16.4.5-2 / SLT3-SWH-4F-14.4.4
MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
FRU EEPROM with temperature monitor.

VPX4814: AcroExpress® VPX6600 system compatible.
Compatible VITA 65 module / slot profiles: MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
FRU EEPROM with temperature monitor.
Compatible with sytems that use UTP control plane interfaces.

XMC Interface

One IEEE 1286.1 XMC module in single VPX slot.

XMC site is PCIe Gen. 2.0 and 8 lanes wide.

3.3V and ±12V provided for XMC modules via the VPX backplane.

Front I/O is supported on air-cooled only.

Rear I/O is supported via XMC P16 and is compliant to VITA 46.9 X24s+X8d+X12d.

Power Requirements

Carrier-Only Power Requirements
+3.3V DC: 0.2A typical plus any additional power consumed by XMC (4A max).
+5V DC: 0.8A typical (4A max).
+12V DC and –12V DC provided to XMC site from VPX backplane.

Environmental

Air-Cooled Operating Temperature: -40 to 70°C (air flow requirement to be greater than 200 LFM).

Conduction-Cooled Operating Temperature: -40 to 85°C (board must operate in a fully-installed conduction-cooled rack).

REDI (VITA 48) Operating Temperature: -40 to 85°C (board MUST operate in a fully-installed conduction-cooled, REDI supported rack).

Storage temperature: Air-cooled: -40 to 85°C.

Conduction-cooled/REDI: -40 to 105°C.

Relative humidity: 5% to 95% non-condensing.

MTBF: 1,595,069 hrs. at 25°C.; 1,225,286 hrs. at 40°C.

Shock: Operating: Designed to comply with VITA 47 Class OS1, 20g, 11ms half sine and terminal sawtooth shock pulses.

Vibration: Operating: Designed to comply with VITA 47 Class V1.

  • PCIe bus 8-lane Gen 1 or 2 interface
  • Supports standard XMC modules (IEEE 1386.1)
  • Conforms to VPX VITA 46.0, 46.4, and 46.9 specifications and optionally VITA 48
  • Supports front or rear panel XMC I/O
  • Rear I/O is compliant to VITA 46.9 X24s+X8d+X12d
  • +12V and –12V provided to XMC site
  • Monitors FRU information and module temperature

VPX4812

Compatible VITA 65 module / slot profiles:
MOD3-SWH-4F-16.4.5-2 / SLT3-SWH-4F-14.4.4
MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
FRU EEPROM with temperature monitor.

VPX4814
AcroExpressTM VPX6600 system compatible.
Compatible VITA 65 module / slot profiles:
MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
FRU EEPROM with temperature monitor.
Compatible with sytems that use UTP control plane interfaces.

Manuals

VPX4812 and VPX4814 User Manual (Log in to download the file)

Additional information

Weight N/A
Dimensions N/A
Part Number

VPX4812-CC-LF: conduction-cooled, VPX4812-LF: air-cooled, VPX4812-REDI-LF: REDI VITA 48, VPX4814-CC-LF: conduction-cooled, AcroExpress® VPX6600 system compatible, VPX4814-LF: air-cooled, AcroExpress® VPX6600 system compatible, VPX4814-REDI-LF: REDI VITA 48, AcroExpress® VPX6600 system compatible

  • Description

    The VPX4812 can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8.

    The VPX4814 is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress CPU.
    These carriers are ideal for high-performance industrial, defense, scientific research, and telephony systems requiring high-speed I/O expansion. The VPX4812 and VPX4814 is available in three versions: air-cooled, conduction-cooled and a Ruggedized Enhanced Design Implementation (REDI VITA 48).

    Performance Specifications

    General

    Form Factor: 3U VPX bus 6.3” (160mm) x 3.94” (100.0mm).

    Front Panel: The VPX4821-LF has a 1.0” VITA 48.1 front panel. Contact the factory for IEEE 1101.10 1.0” and 0.8” options.

    Bus Compliance: VITA 46.0, 46.4, 46.9, 48 and 65. | MIL Spec 217-F @ 105,000 hours.

    VPX Carrier Interface

    VPX4812: Compatible VITA 65 module / slot profiles: MOD3-SWH-4F-16.4.5-2 / SLT3-SWH-4F-14.4.4
    MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
    FRU EEPROM with temperature monitor.

    VPX4814: AcroExpress® VPX6600 system compatible.
    Compatible VITA 65 module / slot profiles: MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
    FRU EEPROM with temperature monitor.
    Compatible with sytems that use UTP control plane interfaces.

    XMC Interface

    One IEEE 1286.1 XMC module in single VPX slot.

    XMC site is PCIe Gen. 2.0 and 8 lanes wide.

    3.3V and ±12V provided for XMC modules via the VPX backplane.

    Front I/O is supported on air-cooled only.

    Rear I/O is supported via XMC P16 and is compliant to VITA 46.9 X24s+X8d+X12d.

    Power Requirements

    Carrier-Only Power Requirements
    +3.3V DC: 0.2A typical plus any additional power consumed by XMC (4A max).
    +5V DC: 0.8A typical (4A max).
    +12V DC and –12V DC provided to XMC site from VPX backplane.

    Environmental

    Air-Cooled Operating Temperature: -40 to 70°C (air flow requirement to be greater than 200 LFM).

    Conduction-Cooled Operating Temperature: -40 to 85°C (board must operate in a fully-installed conduction-cooled rack).

    REDI (VITA 48) Operating Temperature: -40 to 85°C (board MUST operate in a fully-installed conduction-cooled, REDI supported rack).

    Storage temperature: Air-cooled: -40 to 85°C.

    Conduction-cooled/REDI: -40 to 105°C.

    Relative humidity: 5% to 95% non-condensing.

    MTBF: 1,595,069 hrs. at 25°C.; 1,225,286 hrs. at 40°C.

    Shock: Operating: Designed to comply with VITA 47 Class OS1, 20g, 11ms half sine and terminal sawtooth shock pulses.

    Vibration: Operating: Designed to comply with VITA 47 Class V1.

  • Features & Benefits

    • PCIe bus 8-lane Gen 1 or 2 interface
    • Supports standard XMC modules (IEEE 1386.1)
    • Conforms to VPX VITA 46.0, 46.4, and 46.9 specifications and optionally VITA 48
    • Supports front or rear panel XMC I/O
    • Rear I/O is compliant to VITA 46.9 X24s+X8d+X12d
    • +12V and –12V provided to XMC site
    • Monitors FRU information and module temperature

    VPX4812

    Compatible VITA 65 module / slot profiles:
    MOD3-SWH-4F-16.4.5-2 / SLT3-SWH-4F-14.4.4
    MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
    FRU EEPROM with temperature monitor.

    VPX4814
    AcroExpressTM VPX6600 system compatible.
    Compatible VITA 65 module / slot profiles:
    MOD3-PER-1F-16.3.2 / SLT3-PER-1F-14-3.2.
    FRU EEPROM with temperature monitor.
    Compatible with sytems that use UTP control plane interfaces.

  • Specs & Data Sheets

    Manuals

    VPX4812 and VPX4814 User Manual (Log in to download the file)

  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    VPX4812-CC-LF: conduction-cooled, VPX4812-LF: air-cooled, VPX4812-REDI-LF: REDI VITA 48, VPX4814-CC-LF: conduction-cooled, AcroExpress® VPX6600 system compatible, VPX4814-LF: air-cooled, AcroExpress® VPX6600 system compatible, VPX4814-REDI-LF: REDI VITA 48, AcroExpress® VPX6600 system compatible