Click to zoom
$840$1,000
Clear
Product short description:
  • Non-intelligent VME64x IP carrier
  • Holds four IP modules
  • Rear Access I/O
  • Supports two interrupt channels per IP
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The AVME9670 and AVME9675 are non-intelligent slave boards that interface up to four IP modules to the VMEbus. The only difference is that the AVME9675 adds fully implemented geographical addressing. Both are full-height (6U) IP carrier cards that use VME64-compliant connectors to increase the quantity of rear I/O connections beyond that of standard VME. Although the rear connectors are VME64, the electrical interface is standard VME A24/A16. This means that nearly all CPU products (VME64 or not) can still enjoy full access to the IP modules.

When used with a VME64 backplane, the AVME9670 brings all 200 I/O points out the rear P0 and P2 connectors. This convenience eliminates messy cables from hanging out the front of the cage. In addition to a cleaner cage design, it is also much easier to insert and replace boards into the system.

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces. With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

Up to two interrupt requests are supported for each IP module. The VMEbus interrupt level is software programmable.

Individual passive filters on each IP module power supply line provide optimum filtering and isolation between the IP modules and the carrier board.

Performance Specifications

IP Compliance (ANSI/VITA 4)

Electrical/mechanical interface: Supports single or double size IP modules. 32-bit IP modules are not supported. I/O space and ID space supported.
Memory space: Supports 1MB to 8MB per IP module.
Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles, D16/D08(O).

VMEbus Compliance

Meets VME64 specifications per ANSI/VITA 1-1994 and VME64x specifications per ANSI/VITA 1.1-1997.
Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycles.
Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module). Supports D16/D08(O) round-robin hardware interrupt prioritization of IP sources. Carrier registers support interrupt control and status monitoring. Interrupt release mechanism is Release on Register Access (RORA) type.

Physical

Physical Configuration
Length: 9.187 inches (233.3 mm).
Width: 6.299 inches (160.0 mm).
Board Thickness: 0.062 inches (1.59 mm).
Max Component Height: .0.550 inches (13.97 mm)
Recommended Card Spacing: .0.800 inches, (20.32mm)
Connectors: P1 & P2 (VME64x bus):.DIN 41612 160-pin Type C, Level II.
P0 (VME64x bus): J3 Type B, Right-Angle Female 95-contacts, withupper ground shield.
P3,5,7,9 (IP Field I/O): 50-pin male plug header (AMP 173280-3 or equivalent).
P4,6,8,10 (IP Logic Interface): .50-pin male plug header (AMP 173280-3 or equivalent).

Environmental

Operating temperature: 0 to 70°C (AVME9670/75) or -40 to 85°C (AVME9670E/75E models).
Storage temperature: -25 to 85°C ( AVME9670/75) or -40 to 85°C (AVME9670E/75E models).
Relative humidity: 5 to 95% non-condensing.
Power: +5V (±5%): 525mA maximum. ±12V (±5%): 0mA (not used). Plus IP module load.
MTBF: 474,104 hrs. at 25°C, MIL-HDBK-217F, notice 2.

  • Four industry-standard IP module slots
  • 200 I/O points with rear access
  • VME64x high-density rear connectors
  • Full geographical addressing (AVME9675 only)
  • Compatibility with most CPUs (VME A24/A16)
  • Two interrupts per IP module
  • Individually filtered and fused power to each IP
  • Front panel LEDs
  • 0 to 70°C (-40 to 85°C E version)
IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options
  • Compare

    Transition Modules

    $375
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814

  • Description

  • Features & Benefits

    • Four industry-standard IP module slots
    • 200 I/O points with rear access
    • VME64x high-density rear connectors
    • Full geographical addressing (AVME9675 only)
    • Compatibility with most CPUs (VME A24/A16)
    • Two interrupts per IP module
    • Individually filtered and fused power to each IP
    • Front panel LEDs
    • 0 to 70°C (-40 to 85°C E version)
  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
    • Compare

      Transition Modules

      $375
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812 / VPX4814